The swings were always an integral part of the country house or giving, they love not only children, but also adults, especially if a large suspension bench is located as a schoker part. Sometimes it is not always possible to buy good swings, and they are not small money, the quality of their manufacture from part wishes the best.
Make good and reliable swings for the yard or garden is quite possible with their own hands. As a material, you can use both the ready-made shopping billets and the rebuke homemade, they will also save on the material.
For the construction of the swing, there will be six main logs from any breed of trees, in our version of pine, long 2.5 - 2.7 meters and an exemplary diameter of 12-15 centimeters and four logs of a long 2 - 2.3 meters with a smaller diameter.
Collection of crossmen start with alignment of upper ends and twist two logs.
Supported legs cut at an angle of 45 degrees, after checking their horizontality.
To connect all parts, we use threaded knitting needles with a diameter of 10 millimeters, nuts and washers. By combining the desired componentality of the details, we drill through a hole.
Having scored the needle, we are tightened on both sides with nuts and cut the grinding of the spokes.
The second crestus is assembled identically first.
The next step is the connection of two crossbars, put the log and screw on each crossed to two racks on each cross. The second log is attached to the bottom of the rear view of the swing.
For the stability and rigidity of the frame, we screw the inclined bars two pieces on both sides. The top log and two inclined stops are twisted with one through spin.
Ready frame set in the desired place. Under the legs, it is possible to pour a small radius, a depth of 40-50 centimeters. The foundation pillars in them by imagining the metal fasteners in them, to which you need to fasten the racks for stability.
Article on the topic: Laying parquet: the floor do it yourself, piece technology and video, artistic how to lay
The frame of the bench is made of 5x7 cm wooden bars and trimmed the fortieth board.
The bench will be hung on a braided rope from the Kapron thread, it will give it less rigid mobility, you can also use a chain as in most cases.
Installation of the swing is complete, you can start painting.
In order for wood to serve for a long time, we use alkyd varnish with antiseptic additives and the desired color tint.
For the construction of such a swing, three not a full day was spent, but to please the family she will be more than a dozen years.