Some decorative elements are considered a universal decoration that is suitable when making a gift for any holiday. One of these elements is the star. Depending on what form it is made, the asterisk looks appropriately on postcards for the Victory Day, and on the New Year Trees. It can decorate birthday gifts, as well as decorate the interiors to prom. Learning how a surround star from paper is being made, it will be useful because the knowledge gained is more pleased.
Star manufacturing style depends on what role is prepared by it. If it is a detail of a greeting card, then it is necessary to make it in such a way that the back of the product can easily glue on a flat surface.
Japanese art
The most convenient way to work on the bulk star is the use of Origami technology.
To work, you need to take a sheet of paper required. If the expectant is expected by May 9, the star is traditionally manufactured red.
Paper can be taken any size. The main thing is that the piece prepared is a square form. The square is twice. All work is carried out so that the leaf fiftie lines remain on the front side of the convex part.
The work straightens and bends in half by perpendicular sides. The sheet remains in this position. There should be two small squares.
On the right square, two diagonal bends are formed.
The lower angle of the left side is connected to the place of intersection of diagonals, as in the photo.
The corner itself is rejected in the opposite direction.
The right lower corner of the square is combined with the last fold, after which the small part of it turns out to be outward.
Twinks a small corner. On this column is cut off the whole paper blank.
The figure is spreading, forming a five-pointed star.
In the future, the exercise can be glued to the greeting card by February 23 or the Victory Day.
Article on the topic: Master class on weaving Mandala: Instruction with video and photos
The traditional shape of the star with five ends is obtained and when it is performed on the basis of the finished pattern. To do this, the printer prints a schematic image of the crafts and cuts out.
The resulting pattern is superimposed on a colored sheet of paper and will be burned along the contour. Be sure to read on the details of the folds of the folds.
Color blank is bent over dotted lines. Parts intended for gluing, turn away on the inner side of the part.
The second half is carried out in a similar way.
A pair of hollow blanks is connected to each other by gluing the details bent. As a result, it turns out a star in 3D volume.
The aforementioned scheme can be independently changed, which will allow you to create stars of different magnitudes and forms on personal templates.
When there is no scissors or glue at hand, but there is only paper, you should not despair. The star can be created in the presence of a minimum.
How to implement it right, it is desirable to consider step by step. You need to prepare five square paper sheets.
The first sheet is taken. It folds twice in half and spreads.
Now you follow the square of the square bend to the center.
Two corners opposite each other are straightened.
Now the workpiece must be folded along the diagonal line.
A fold passing in the center is implanted inside, and two side drives are strung out.
The following four blanks of the future star are formed a similar method. Elements are equipped with one side pocket. With it, they are connected together.
The solid angle of the part is inserted into the pockets of another detail. The guideline of the correct alignment of the elements is the same location of their pockets - right.
Star ready!
It also turns out a five-pointed one. But sometimes you want to portray stars a little different form. Origami will come to the rescue again.
The square sheet is folded by opposite sides, after which it straightens.
Now it needs to be folded on both diagonals. And reproduce again.
Article on the topic: Owl amigurum hook: video lessons with photo schemes
In the central folds of each side of the square, cuts are carried out, not reaching the middle. At the same time, all four nappies should be the same in depth.
Cuts are bent the corners of the mustache, where the top will be the corner of the square diagonal. The curved parts are glued to each other.
It turned out one half of the product.
By the same principle work on the second part of the star is underway.
Halves can be glued with hollow parts inside, and a surround star will be obtained, and you can put them on each other perpendicularly.
In the second case, it is advisable to use contrasting paper paper. So the handicap looks more advantageous.
What other ways you can create bulk stars will demonstrate a specially selected video.