How to make an air humidifier with your own hands or what to replace it, if dry air in the apartment does not most effect on the well-being of people living there, and also prevents the normal growth of houseplants. In addition, indoors where the air humidity is below the norm, a large amount of dust accumulates, complicating the life of the hostess, which is forced to clean their home often.
In stores you will find different models of devices that can improve the quality of "microclimate" in the room, but such a purchase is not for everyone to pocket.
How to make an air humidifier do it yourself
To create an efficient and inexpensive moisturizer, use one of the following methods.
What kind of humidity should be in the apartment
Humidifier from plastic containers and old CDs - disks
The device got the name "washing", because moisturizing, the air is also cleared. You will need:
- 4-6 liter plastic container with lid;
- engine from the tape recorder;
- Old CDs - discs;
- Protecting plastic value of 5 * 5 cm;
- gear from toys;
- fan;
- Thin trimming pipes from plastic;
- Adhesive pistol.
As a rule, everything you need to create an air humidifier have every home.
Assembly sequence:
- Pour holes in plastic disks from 2 sides using a glue gun. Better, if "patchwork" will be round, identical size.
- In plastic inserts, make small holes to spend a thin tube through them.
- Slide the drives on the tube, tightly pressing them to each other, and secure the pistol.
- From two opposite side of the container, make holes and insert a blank with disks into the container. From one edge, fasten the design with the help of glue and washers, and from the other - stick the gear.
- Attach the engine from the tape recorder so that the gear can rotate "insides" with disks.
- Make several holes in the capacitance cover. One of them is intended for the fan, the rest will ensure air circulation.
- Fill water into the container.
Article on the topic: Icubana do it yourself from branches and candies with photos and video
Use the appointment instrument.
How to soften water at home
Humidifier from garbage baskets and clay
Ceramizite-based humidifier is very effective, since it is capable of not only absorbing, but also to allocate moisture. The device consists of:
- Plastic garbage baskets, 2 of which should be smaller;
- Cooler from a computer with a diameter of 14 cm;
- buckets of 10-12 liters;
- aquarium pump;
- Plastic screeds.
It will take aquarium pump.
Assembly process:
- Connect smaller baskets using screeds. They perform the role of the housing.
- In the same way, connect the 2 remaining containers, after placing bonded baskets in them. As a result, you will get a body of 2 layers.
- In the bottom of the top big basket, make a slot, pour out the grains. The main thing is to pick up the composition with medium-sized pebbles so that they do not fall out of the holes, and flushed it carefully.
- Place the pump from the aquarium in the pump bucket, having pipes up the facilities. Ring with holes place in the upper part so that water flows through holes back into the container.
- At the top of the design, install the cooler, the "delivering" air to the wet clay.
You will receive a remarkably made device that supports the humidity of the atmosphere indoors.
Humidifier air from a plastic bottle with their own hands
The simplest plastic bottle is made, but nevertheless a completely effective room humidifier. Make the following:
- In a plastic bottle with a scissors or a stationery knife, make a hole 10 cm long and 5 cm wide.
- From a piece of dense material, cut 2 long ribbons, a width of at least 3-5 cm (you can use the rope).
- With ribbons or ropes, we suspend the container on the heating battery with hole up.
- Marla to fold so that a tape is 1 meter long and 7-10 cm wide.
- Fill the container with water, and place one end of the marlevary ribbon into it. Another edge tightly wrap around the heating pipe.
The humidifier from the bottle is made in another way. A capacity is required, the volume of which is at least 10 liters and the fan. Assembly scheme:
- Crop the throat of the bottle so as to secure the fan.
- At a distance of 8-10 cm from the edge of the cut, make several holes intended for the outlet of wet air.
- Pour water, not reaching 3-5 cm to the holes, and apply the fan at the top of the bottle.
Article on the topic: Earrings of threads - master class
The only minus is not too aesthetic appearance, but thanks to him, the humidity in the room will correspond to the norm.
How to moisten the air in the room or apartment without a humidifier
Ultrasonic air humidifier with his own hands
Of sufficiently simple details, you can independently make an ultrasonic humidifier.
To make an ultrasonic humidifier, a number of special materials will be required. The device consists of:
- Capacities of plastic material with a volume of 5 to 10 liters;
- flexible tube (corrugated);
- ultrasonic converter;
- stabilizer;
- computer cooler;
- power supply;
- aluminum corner;
- plastic cup;
- Ring from children's pyramid toys.
The option is definitely costly, but in any case the homemade moisturizer will cost cheaper than the device purchased in the store. Assembling instrument:
- Using a drill, make holes in the container lid. They are needed for the wire of the steamer, fastening the fan and the output tube.
- Install the fan on the container, insert the end of the corrugated tube to another hole.
- Steam Education Plant Place on a floating platform. It can be made from plastic glass and "bagel" from children's toys-pyramids. Insert the element of the toy into the glass, after drilling a hole in the bottom, to which then attach a slice of a piece of fabric (it will perform the filter function). This construction should be in water constantly so that the humidifier worked uninterrupted.
The operation of the device will be carried out under a voltage of 24 V, and in order to function the fan, 12 V. The power is carried out using the stabilizer chip. It will be better if the scheme and the speed control knob will be located under an aluminum corner.
The homemade humidifier does not need constant maintenance, it is easy to operate, the main condition is to use distilled water.
Industrial air humidifier do it yourself
To independently make the device, in terms of performance, not inferior to industrial moisturizers, you will need to build from the following details:
- plastic container with lid, at least 16 liters;
- corners for ventilation pipes (2 pcs.);
- Power supply (AC 220 - DC 45B - 350 W);
- cord and plugs connecting to the network 220 V (2 pcs.);
- fan with a capacity of at least 105 cubic me / o'clock;
- Plastic tubes with diameter;
- bases for installing pipes (2 pcs.);
- Ultrasonic air humidifier module with a capacity of at least 7 liters per hour;
- Float Valve.
Article on the topic: Openwork poncho needles: Schemes and descriptions for full women with video
You can adjust the output voltage using a variable resistor.
The assembly of an industrial humidifier is carried out according to the scheme:
- In one of the walls of the container, in the middle of its height, make a hole for installing the float valve.
- In the lid, drill a hole and output the wire. To improve the quality of the future of the humidifier, will cross the cover with the seal, this will prevent the "leakage" of the air.
- Hole to the wire seal with a rubber gland.
- Make another hole in the lid through which the pipes will be installed. With silicone sealant, treat the gap between their bases and the lid.
- Separate the pipe so that the length of the parts is at least 30 cm. One of them is intended for installation between the lid and the fan, the other is at the output.
- Install the fan so that the blades are not less than 20 cm from the water, otherwise the splashes will damage the mechanism.
- Place the module in the container and secure it. Then set the float valve so that the fluid level is supported by 10 mm higher than the module shutdown sensor.
- By observing the polarity, connect the device to power, and then connect the cord 220V to the block connectors.
- Adjust the output voltage of the unit 45 V using a variable resistor. Conduct this manipulation under load.
When assembling the humidifier, remember - the power supply must be positioned in the place protected from moisture. If you are all done correctly, the device will handle the perfectly with its functions and moistened air will regularly enter the room. If you are not confident in your abilities, use simple options, such as a wet towel or water tanks placed on the heating battery.
How to replace air humidifier at home
If you are not a master of all hands and collect even the simplest air humidifiers - an unreal task, use the following methods:
The listed methods are simple and allow you to easily moisten the air in the apartment. But their lack lies in the fact that the owners will have to constantly monitor the water level in the tanks or the degree of moisture content of the towel or rug.