Hannun kai mai taushi don gado tare da hannuwanku: 3 hanyoyi masu sauki

Gado yana yanke hukunci da salon zane mai dakuna. Wani gado mai ban sha'awa mai ban sha'awa yana sanya raguwa duka. Ta yaya zan sabunta wannan batun na ciki? Uku masu ban sha'awa uku zasu taimaka maka ƙirƙirar kan ido mai taushi don gado tare da hannuwanku.

Heighboard mai laushi - sabon ƙira na ɗakin kwana

Headed na irin wannan gado an rufe shi da zane wanda aka sanya roba mai laushi. Don mafi girma da kyau, hanyoyi daban-daban na screeds ana amfani dasu. Irin waɗannan gadaje suna da kyau tsada, amma bishara ita ce ga wannan ba ku buƙatar siyan sabon gado. Kawai kuna buƙatar yin sabon gidan hoda mai laushi - bidiyo da kuma aji mai jagoranci zai taimaka muku da wannan.

Ko da mafi sauƙin haye mai laushi yayi kyau, kuma idan emble zai tsaya kusa da datsa guda - sabon dakin zane ya kusan shirye.

Master Class №1 "mai laushi mai taushi a gado na 'yan awanni biyu"

Wannan shine ɗayan hanyoyi masu sauƙi don ƙirƙirar irin ƙayyadadden kayan gado, wanda ya dace da waɗanda ba sa son rikici.

Kayan aiki da kayan aiki:

• flywood;
• kumfa;
• kowane masana'anta don tushe;
• Kayan kwalliya na waje na waje;
• Stapler na girke-girke;
• Jigsaw na lantarki.

Tun da wannan hanyar ba ta ɗauka sawun, yana da kyawawa don ɗaukar zane tare da Buga mai kyau. Kamfanin Photoshon-Photoshan-Photoshan-Photosha zai iya kuma yi kama da kyan gani, kawai kuna buƙatar zaɓar launi mai kyau don haka mai laushi mai laushi tare da hannuwanku gamsu.

Bayanin aiki

Mataki ta Mataki Bayani, yadda ake yin hayaki mai laushi:

• Shefen plywood yana yanke da jigsaw a kan girman da ake so - zai iya zama duka murabba'i mai dari da kuma wani fom. Koyaya, a lokacin ƙarni ya fi sauƙi a yi aiki tare da siffar rectangular.
• Akwai yadudduka 2 na roba na kumfa akan parru, sannan mu samar da zane don tushe - zai iya zama kowane yanka da ba lallai ba. Ya kamata a kulla ku da mai kauri a bayan hoton plywood.
• Yanzu ci gaba zuwa matsanancin kyakkyawan zane da shirye!

Mataki na farko akan taken: Hango a cikin Hallway - kayan aiki da kayan aiki (+40 hotuna)

An kashe shi kaɗan lokaci kaɗan, amma cikin ciki an canza shi da kyau. Abin sha'awa, idan kanada launi iri ɗaya ne kamar labulen - bayani mai ban mamaki.

Lambar Master Lambar 2 "Shugaban murabba'ai masu laushi"

Tasirin kai tsaye a cikin hanyar murabba'ai masu laushi ne saboda kera shi za'a iya aiwatar da shi ko da daga sharan nama da roba roba. Idan an buƙaci yanke na yanki don wasu hanyoyin, to can dole ne ya kasance ƙananan murabba'ai. Haka kuma, ba a iyakance ba a haɗuwa da launuka da rubutu - tabbacin samfurin ya tabbatar.

Kayan aiki da kayan aiki:

• mayafin;
• kumfa;
• batting (sintelpon);
• plywood ko kwali mai jan hankali;
• almakashi;
• electrollik;
• manne ko shafa mai kai;
• Screwdriver;
• hooks don rataye;
• Stapler na girke-girke.

Bayanin aiki

Yanke shawara tare da kayan kuma fara ƙirƙirar ƙirƙirar magungunan ku na murabba'u masu laushi.

Mataki-mataki bayanin:

1. Daga plywood ko kwali, mun yanke kimanin murabba'ai 60 - Girman da girman ya dogara da girman kan alamu na gaba.
2. Daga roba mai roba, mun yanke murabba'ai iri ɗaya a cikin girman, murabba'ai suna ƙara sosai daga yaƙe-yaƙe - tare da rushewa don shawo kan roba ta kumfa.
3. A karshe amma na yanke murabba'in daga masana'anta, wanda aka ba shi gefuna ya kamata ya ci gaba da kishiyar.
4. Yanzu muna tattara murabba'ai a cikin wannan tsari - plywood, roba roba, batting, masana'anta.
5. Nemo masana'anta a bayan samfurin tare da mai kauri.
6. Mun shirya tushen plywood, MDF ko mai dorewa mai kama da girman murabba'ai tare tare.
7. Krepim mu murabba'ai zuwa gindin manne ko zane-zane.

Wannan hayaki yana rataye bango tare da ƙugiya na musamman. Wannan dabarar na iya ƙirƙirar duka kujerar monophonic kuma a cikin salon patch aiki.

Lambar aji 3 "Shugaban Karetny Deat"

Karetny screed ko capitone hanya ce mai kyau na kayan ado na kayan ado, wahayi zuwa ga hanyar karewar kafet a cikin karni na 18. Wannan mai laushi mai laushi ne wanda ya fi taushi zuwa tushe yana haifar da tsari a cikin hanyar murabba'ai ko rhombuses. Yayi kama da wannan kayan ado na zamani, a cikin ɗakin kwana, jin daɗin kwanciyar hankali da kwanciyar hankali.

Mataki na a kan taken: Madayali zai yi tumbon don baranda kanka

Ga irin wannan datsa, da kan kujerar ya fi kyau a zabi masana'anta mai tsada wanda ya samar da wasu kayan marmari.

Babban:

• fata - gaske ko wucin gadi;
• velours;
• karammiski;
• Wucin gadi.

Waɗannan abubuwa masu yawa ne waɗanda ke iya haifar da ingantaccen kyakkyawan hotuna - su ne makasudin. A kan masana'anta shi zai iya zama tsarin da ya dace da ra'ayin da hoton hoton ya kirkira. Sabili da haka, yadudduka mai haske tare da tsarin sauƙaƙan abubuwa ba su dace da karuwa ba.

Ana amfani da kayan da ke gaba don screed:

• Buttons, an rufe masana'anta;
• m beads;
• lu'ulu'u.

Buttons na iya zama da sautin ko bambanci - Dukansu liyafar tasiri na musamman. Kyakkyawan gargajiya baki da farin sabani a cikin salon zane-zane. A matsayinsa na soyayya, zaka iya amfani da maballin wardi daga masana'anta.

Kayan aiki da kayan aiki don aiki:

• takardar flywood ko kwamiti tare da ramuka;
• Porolon tare da kauri na 50 mm;
• Simetpon;
• wuka;
• Manne roba;
• takarda mai yawa;
• m zaren;
• babban allura;
• mai alama;
• Buttons;
• masana'anta mai yawa;
• kayan miya;
• Jigsaw na lantarki;

Bayanin aiki

Ga wannan manufa, wata hannu tare da ramuka na musamman yana da amfani ko kuma takardar clywood wanda za a yi ramuka iri ɗaya.

Wannan hanyar tana buƙatar daidaito da himma, amma sakamakon ya cancanci - gadon sarautar da kuke da shi a gidan. Bayani da bidiyo zasu taimaka muku yin komai ba tare da kurakurai ba.

Mataki ta Mataki Bayani, yadda ake yin hayaki mai taushi a cikin salon karusa:

• Yanke da fasali da kuma dagula hanyar da ake so.

• Munyi akan plywood ko kwamiti tare da ramuka narkup a daidai da alfarwar alfarma - a cikin hanyar murabba'ai ko rhombuses (lu'u-lu'u). A kan kwamitin da ake buƙata don kawai ana buƙatar alamar ramuka na musamman don shari'ar, a kan plywood - rawar jiki.

• Shirya takarda inda muke yin daidai da namuka iri ɗaya.

• Daga sama zuwa roba mai roba, muna sanya takarda ku kuma amfani da layout na ramuka ta amfani da alamar.

• Mafi yawan mataki mataki shine yin ramuka na wuraren da aka yiwa alama. Don yin wannan, yi amfani da wuka.

• Dole ne roba roba dole ne ya zama glued zuwa plywood ko manne irin roba irin wannan sa ramuka na kayan biyu ta zo daidai.

• Wani Layer na kwamitin Synthet Board yana glued zuwa roba roba a kan abin da ake buƙata ramuka a tare da alamar iri ɗaya.

• A hankali shimfiɗa masana'anta kuma gyara shi da kayan girke-girke. Tare da siffofi na hade, shugaban kai ya kamata a yi amfani da allura tare da zaren, jan masana'anta daga cibiyar kuma a ko'ina rarraba zuwa gefuna.

• Buttons suma suna rufe zane ko barin kamar yadda yake - shi duka ya dogara da ƙirar maɓallin.

• Aika maɓuɓɓugai da aka yi wa gidaje da aka bayyana a cikin gida da kuma gyara zaren - fara daga tsakiyar, ci gaba daga tsakiyar bangarorin.

• Gyara zaren a kan plywood yana da wahala, yana da kyau a yi amfani da baka guda. Zaren an tono a tsakanin su kuma dogara da shi sosai. Shugaban shirya!

Mataki na farko akan taken: Hango a cikin Hallway - kayan aiki da kayan aiki (+40 hotuna)

Kuna iya buɗe budewar da kai tsaye da a cikin roba na roba da clywood, amma don yin wannan, kuna buƙatar wannan bututun ƙarfe a kan rawar soja. Bugu da kari, wannan hanyar tana buƙatar wasu ƙwarewa - kuskure ɗaya kuma zaka iya lalata komai. Headarfin kai mai taushi mai laushi yana canza gado, ɗakin kwana da yanayinku. Masana'anta tana da sauki sosai, kuna buƙatar bincika bidiyon da kuma aji na kwarai. Don yin irin wannan sabuntawa na gado, ba za ku buƙaci rana ba, kuma don zaɓuɓɓuka ba tare da ƙayatar da sa'o'i biyu ba.

Ma'auraye hoto

Photo gallery