Idan a lokacin gyara ba ku da damar kare windows daga gurbatawa, kuna buƙatar gano ma'anar ma'anar hakan zai iya tsabtace mafita. Hakanan, tare da fuska mai kama da irin wannan yanayin kuma a cikin yanayin lokacin da ƙasa bayani ya buge da tayal.
Wanke windows daga farkon
Akwai nau'ikan abubuwan ƙarshe, waɗanda za a iya cire ruwa daban, amma akwai kuma abubuwa masu yawa waɗanda ake buƙata na sinadarai na musamman. Yana da matukar matsala don zaɓar irin waɗannan abubuwa, saboda kuna buƙatar cire gurbatawa saboda ba zai yiwu a cutar da kayan ƙoshin ba.
Yadda za a Cire manyan abubuwa daga gilashi?
A wanke windows na injin daga farkon
- Kasar gona karkashin bangon waya
Sau da yawa koyaushe kafin manne fuskar bangon waya, ana buƙatar kula da farfajiya tare da manne don fuskar bangon waya. Musamman wannan maganin musamman ana shafawa idan ya kasance "sabo." Ana iya tsabtace ta da ɗan moistened tare da raguwar, amma idan ya bushe - kar amfani da farrasies. Don yanke wakilin da aka bushe, zaka iya shafa maka gurbataccen yanki kuma jira kadan har sai manne kumbura. Sannan ana iya cire shi da sauƙi tare da soso.
- Acrylic ƙasa karkashin fenti a kan tushen da ruwa
Irin wannan kayan yana da sauƙi a tsabtace duka gilashin da fale-falen fale-falen buraka. Don yin wannan, dole ne a gauraya tabo kuma a ba da damar ɗan kashe, to zai tashi daga tille ba tare da amfani da sunadarai ba. Bagan wani ne kawai zai iya zama taro wanda akwai kamuwa da launuka. Bayan haka kuna buƙatar rasa ƙwayar fannin da aka gurbata ruhi. Idan printer taro dried yayi yawa, rigar shi da ruwa tare da babban zazzabi. Idan an iya cire gurbata daga tayal a ƙasa, ya fi kyau a ba da fifiko ga ruwan zãfi.
- Adshiniion Primer
Wannan shine farkon da ake amfani da shi don impregnation na kayan. Yana kara yawan tasirin tushe da abubuwan da suka biyo baya don kare ayyuka. Idan irin wannan tarko ya bushe da wahala, zai yi wahala sosai don share shi. Ainihin, cire irin wannan gurbataccen zama na musamman. Don tsabtace gilashin shine mafi kyawun saka ruwa. A wannan yanayin, dole ne a kiyaye shi a wani kusurwa na digiri 45, yana ƙoƙarin ɗaukar gefen gefen na farko. Bayan tsiri ko ƙyallen da aka cire, ana maimaita ayyukan a cikin da'irar ta biyu. Don sauƙaƙe wa kanku, zaku iya amfani da Esters da ke hanzarta ESTers waɗanda ke hanzarta aiwatar da kumburi kasar gona da "kashe" kayan aikinta.
Mataki na kan batun: Bog na bangon bangon waya daban-daban
Fasahar tsaftacewa daga masarufi daga adhesive na farko yana kama da wannan:
- rigar da tsallake zuwa ga sauran ƙarfi kuma a shafa don gurbatawa;
- Jiran kimanin awa 1;
- Tsaftace ragar;
- Fim tare da ruwa;
- Shafa farfajiya da tayal tare da sabulu na soap, sannan a fitar da ruwa mai sauki.
- Phenolic post
Don jiƙa katako, ana amfani da shi sosai a farkon amfani da phenol. Idan irin wannan bayani ya buga saman yumbu ko samfurin gilashin, sannan sama da awanni 15 sun shude, to, za a buƙaci a cire shi don cire gurbatawa. Hakanan sauran ƙarfi shi ne wanke don bauta wa Xylene, sauran ƙarfi, da haɗuwa da fararen fata tare da sauran ƙarfi tare da daidaito daidai.
Idan gurbataccen bai da lokacin bushewa, cire shi tare da kumfa mai sauƙi ko ragewa mai sauƙi.
A wannan yanayin, ba ku san lokacin da ƙasa ba ku sani ba, amma kuna da kaɗan daga cikin mafi yawan abu, to irin wannan aikin ya isa kawai. A saboda wannan, ana amfani da mafita ga gurbataccen makircin fale-falen buraka, suna jira ne, sannan a goge tare da raguwar ko soso da sabuwa. Irin waɗannan ayyukan na iya taimaka muku ku jimre wa ɗawainiyar, saboda a cikin kowane ƙasa akwai wani nau'in sauran ƙarfi. Amma, idan lokaci mai yawa ya wuce bayan gurbatawa (fiye da kwanaki 10-14), to irin wannan hanyar ba za ta cece ku ba. Bayan haka, a cikin wannan dogon lokaci, abu gaba daya aka yi polymerized, kuma wata hanyar da ake buƙata na ƙarfi aiki don tsabtace tabo.
Maɓallin Tsabtace na gida
Yadda za a wanke farkon daga gilashi?
Idan ta faru ta faru saboda ƙasa ba ta ragu ba kwata-kwata, kuma nau'in nasa ba a san ku ba, tambayar ta kasance ba a lalata ta fiye da gurbata da ba ta ƙare ba? A wannan yanayin, dole ne ku gwada yin abubuwa daban-daban da kowane irin fasaha.
A matsayinka na mai mulkin, ana amfani da tafasshen don cire gurbata daga fale-falen buraka tare da ƙananan poros. A saboda wannan, an shayar da taci tare da ruwan zãfi, kuma bayan 'yan mintoci kaɗan shafa rag.
Mataki na kan batun: Yadda za a zabi tushe don gidan wanka daga polyester
Ana amfani da vinegar don saman gilashin da kuma tayal mai tsayayya. Ana zuba a kan ustuted fom don bushe ƙasa, bayan minti 10-15, cire da ruwa. Irin wannan tsabtatawa na farfajiya dole ne maimaita sau da yawa.
Soda ya dace da duka gilashin gilashi da kuma tayal. A bushe ƙasa ta bushe da ruwa, fada barci soda ga samuwar taro na kashewa. Bayan mintuna 5-10, dole ne a wanke wannan taro ta amfani da soso na kumfa. A wannan yanayin, Soda zai yi aiki a matsayin sauran ƙarfi a kan abin da aka samo asali kuma a matsayin abin da ke fitowa.
Tsaftace sunadarai
Tsaftace kuma wanke windows
Idan ba za ku iya share gilashin daga farkon tare da kayan aikin farko tare da kayan aikin farko ba, kuna buƙatar gabatar da "manyan bindigogi masu nauyi" a fuskar sunadarai.
Don tsarkake tabarau, zaku iya ɗaukar kowace hanya, kuma don tayal ya cancanci siyan abu dangane da alkali.
Don mafi girma gani, yi la'akari da fasalolin fasaha na mashahurin ƙarfin lantarki.
| Kaddarorin | Wani abu dangane da phosphoric acid, tasirin yana da sauri, ba tare da lalata farfajiya ba. Yana da wari mai daɗi. |
| Abin da aka kafa | Organic da Inorganic acid, ba-ionic surfactants (kasa da 5%), masu hana lalata, alalments da dandano. |
| Yanki na amfani | Don tsarkakewa na ruwa da acid-tsayayya wurare, tsabtace-kasar ta rufe bene. |
| Nau'in abu | Ruwa |
| Siffa | Abubuwan Inorganic |
Duk magungunan da aka ambata a sama "da aka ambata suna da hankali da ƙwararru, don haka kafin amfani da su kuna buƙatar matuƙar tsarin da aka ƙayyade a ciki.
Don cire ƙazantattun abubuwan zubar da bushewa, yi amfani da maida hankali ga sunadarai "don tsabtatawa mai zurfi", bayan wanda yake da kyau a goge samfurin ko tushen ruwa.
Tsaftacewa daga tsinkaye tare da mai tsafta
Muna kashe windows daga farkon
Ainihin, mafi girman adadin tsotsa foda na iya tsabtace shi da tsabtace tururi. Ya tabbatar da kanta da kyau lokacin tsaftace makomar tayal, amma bai dace da gilashin gilashi ba. Hakanan yana da daraja wajen mai da hankali yayin aiki tare da fale-falen buraka, wanda ba a iya faɗi sosai.
Mataki na ashirin da: Parquet Parquet: Tsarin aiki da shigarwa, hoto, kwamitin gyara Soviet akan Legas, A waje, Lamunin A waje
Fasahar yin aiki tare da tsabtace tururi mai sauki ne kuma ya ƙunshi maki 2:
- Shigar da matattarar tururi ga yanki mai gurbatawa;
- Cire gurbataccen gurbata tare da m shafi tare da buroshi.
Kafin amfani da tsabtace tururi, yana buƙatar gurbataccen juzu'i tare da sauran ƙarfi. A wannan yanayin, tsabtace tsabtace na injin zai rage, kuma tayal ba zai rasa bayyanar da ya bayyana ba daga rikici.
Aikin kariya
Wanke gilashin daga farkon
Muna fatan komai zai yarda da gaskiya cewa yana da sauƙin hana matsalar, maimakon kawar da shi. Amma, irin wannan magana ta tuna kawai bayan kashe awanni kaɗan don tsabtace farfajiya.
Amma, a zahiri, idan muka tuna cewa komai za a iya ɓoyewa a ƙarƙashin fim ko tsoffin jaridu, to ba lallai ne ku kashe lokaci mai yawa da ƙarfi don tsayar da bushewar ɓarnar ƙasa ba.
Don kare windows, zaku iya amfani da fim ɗin trink, wanda ke halin mafi ƙarancin kauri, kuma ba zai iya hana shigar azzakari da rana ba. Abu ne mai sauki ka hau shi kawai a kan firam da kanta, ta amfani da babban tef don wannan, da kuma tayal, zaka iya zaɓar kowane abu mai jan hankali. Za'a iya ɓoye shafi na waje kawai a ƙarƙashin polyethylene, wanda zai fi kyau a saman hanyar kuma tare da takarda mai ɗorewa.
Irin wannan maganganu mai sauƙi zai taimaka wajen yin ingancin gyara da sauri ba tare da ƙarin saka jari na kuɗi ba.