Wani muhimmin abu na ƙirar taga taga tare da labulen shine cornice. Irin wannan tsarin gaba ɗaya, sauƙin aiki da amincin dogaro ya dogara da madaidaicin zabi na cornice.
Babban Kayayyakin Wasanni
Dokoki don zabar da kuma shigar da cornice don labulen
Shigar karnis don Hannunku da hannuwanku a ƙarƙashin iko ga kowane gida. Hanyar shigarwa ta dogara da kayan ƙira, tsarin ƙasa, shafin shigarwa (bango ko rufi) da zaɓin farfajiya wanda aka samar da su.
Kafin shigar da 12ves, ban da dangantakar sa zuwa cikin ɗakin da kuma ƙirar labulen, yana da mahimmanci la'akari da yawan dalilai:
- Ƙarfi. Dole ne ƙirar dole ne ta tsayayya da nauyin gardinin. Dangane da wannan, kayan an zaɓi (ƙarfe, itace, filastik ko kirtani), inganci da sanda ko bayanin martaba.
- Hanyar hawa zuwa farfajiya. Yi la'akari da jimlar nauyin cornice da labulen labulen, kazalika da nau'in shafi wanda za'a sanya ƙirar. Akwai manyan hanyoyi guda uku: ta hanyar ramuka a cikin mornes da kanta zuwa farfajiya, akan consoles.
- Girma. Tsawon eaves ya wuce Windows sau 40 cm.
- Yawan layuka. Ya danganta da yawan labulen, ɗaya-, ko tsarin jere guda uku. Dangane da haka, faɗinsa ya dogara da wannan fa'idar.
Juya labulen don labulen bayan bayan ƙarshen aikin gyara. Wuta ta miƙa auren. A wannan yanayin, matsayin abin da aka makala an ƙaddara a gaba kuma a ƙarƙashin fim ɗin ko masana'anta an sanya masana'anta a cikin mashaya na katako don shigarwa na gaba.
Shigarwa na labulen bango
Zabi wani samfurin da ya dace, kuma an ƙaddara tare da wurin wurin, zaku iya fara shigarwa. Don haɗa cornice zuwa bango kuna buƙatar waɗannan jerin kayan aikin:
- Electrode ko mai sarrafa shi.
- Screwdriver ko siketdriver.
- Kananan hacksaw.
- Matakin gini da kuma bututun.
- Mataki na mataki (zaka iya amfani da tebur).
- Roundete, mulki da murabba'i.
- Fensir.
Mataki na kan batun: Abin da za a tsakanin Windows?
Rarraba masara ga labulen a bango ta amfani da baka a cikin irin wannan jerin:
- Ana amfani da cornice ga bango da kuma tsayi mafi kyau an ƙaddara shi da saman gefen taga taga (a matsakaita 6-7 cm).
- Tare da taimakon matakin, ana aiwatar da layin kwance kai tsaye kai tsaye.
- Aiwatar da wani fata, a kan layin da aka gudanar yana nuna wuraren abin da aka makala.
- Tare da taimakon rawar soja ko mai aikin turare, ramuka a ƙarƙashin Downel Rock. Don daidaitaccen abin da aka makala, wata rana shine 6 × 30 mm ko 6 × 40 mm.
- An saka Downels a cikin ramuka kuma haɗa babbar hanyar kusurwa ɗaya don ciyawar. Plumb ɗin yana bincika wurin duka abubuwan da aka makala a kan layi ɗaya.
- Na biyu (wasu) an haɗa baki kuma sake amfani da matakin, an bincika matsayinsu a cikin jirgin sama a kwance.
- Bayan haka, zaka iya tattarawa da shigar da kasuwar labulen, gani duba madaidaicin wurin.
A kan aiwatar da hako, rawar soja ba zai iya zamewa ba daga hanyar da aka yi niyyar mil milimita, wanda zai haifar da sakamakon tsarin. Don guje wa rarrabuwa a wuraren yin hako, zaku iya yin hutu na 2-3 mm.
Fasali na hawa rufin eaves
Yawancin tsarin layin rufin an yi shi ne da PVC ko aluminium, don haka kuna buƙatar la'akari da nauyin labulen tun daga farko.
Shigarwa na rufin rufin
Don shigar da murfin rufi don labule, iri ɗaya na kayan aikin don bango na bango, amma shigarwa na faɗin labulen yana da wasu bambance-bambance. Shigowar Karnis na Karnis don labulen a kan tushe na kankare:
- A farfajiya na rufi alama ce.
- Smallan ƙaramin filastik ko bayanin martaba na aluminiaw ko a cikin tsayin dake da ake so, matosai ko na gama abubuwa a kan wurin yanki.
- A gaban sashi, ramuka suna jingina da diamita na ɗan wasan yara, bayan wannan, sun ɗauki bit of m diamita (a ƙarƙashin Downel) da kuma rawar da ke kusa da rufin. Mafi girman nauyin labulen, ƙaramin nisa tsakanin ramuka.
- Ana amfani da bayanin martabar a cikin rufi bisa ga alamar da aka haɗe ta tsakiyar rami ta dunƙule ɗaya. Don haka, ya kasance da ikon daidaita nesa zuwa bango, dan kadan juya bayanin martaba.
- An duba wurin dangi a bango, a batun yanayin an daidaita shi, kuma ramuka a karkashin sauran Dowel sun yi sanyi.
- An yi ficewa a cikin dukkan wuraren da sauri.
Mataki na labarin akan taken: Lambu daga tsire-tsire na daki a cikin Apartment: Kusa da zuwa Yanayi a Gida (Hotunan 37)
Lokacin shigar da a rufe filasan filasta, ana yin shigarwa a cikin jerin, duk da haka, sararin samaniya na malam buɗe ido (molly), dole ne kuma ku kula da jimlar nauyin tsarin.
Shigar da EAves don labulen shimfiɗa a kan wani gida mai hawa yana buƙatar taka tsantsan da daidaito, tunda gyara kwamitin da aka lalata da ta yaya. Wuraren hakowa ana alama tare da alamar alama, bayan waɗanne ƙananan keɓaɓɓun cocaging a kansu (wannan zai gyara diamita na ramin kuma ya kare shi daga tashin hankali na zane). Na gaba da sauri ga rufin cornice don ana yin labulen da aka daidaita. Yana da mahimmanci a bincika farfajiya ta hanyar rufewa don kasancewar cin abinci ko tsafi mai kaifi, idan an gano su, dole ne a share shi.
Idan saboda wasu dalilai shigarwa a rufi mai yiwuwa ne, kuma ba zai yiwu a mayar da samfurin zuwa samfurin ba, zaku iya yin fid da rufi eailed da bangarori da na m-dimped.
Kula da labulen
Ana yin sauri don labulen da aka yi ta hanyoyi da yawa, waɗannan zaɓuɓɓuka sun fi kowa gama gari:
Duba Tsarin bidiyo
- Kulkin labule - dinka tare da saman labulen kuma yana sanye da igiya don daidaita tsawon zane. Na iya samun layuka ɗaya ko biyu na madaukai.
- Cire na ruwa - ƙarfe ko ƙawan filastik waɗanda aka sanya a kan ramuka a cikin zane.
- Hooks. Babu wani kayan ado, duk da haka, kusan ana kusa da shi koyaushe a baya da fuska allon ado na ado.
- Karfe ko filastik zobba, da bambanci ga kalubalen, an shigar da su tare da saman gefen nama.
- Madaukai madaukai.
Yanzu zaka iya hawa cornoice don labulen. Muna fatan tambayar ba za ta sake samun yadda ake shigar da kasoyin ba.