Da'awar tufafi tare da hannuwanku: Tsarin Majalisar Dokoki na Exchit

Rage tufafi yana sanadin daidaitawa da sauƙi na amfani. Irin wannan zane zai zama daidai sosai a ko'ina. Yana sa ya yiwu a adana sararin samaniya yadda ya kamata, wanda yake da muhimmanci musamman ga gidan gari.

Misalin zane-zane da kuma ma'aunin sutura.

Don tattaro tufafi tare da hannuwanku, kuna buƙatar bin waɗannan matakan:

1. Aikin shirya, lokacin da ake kiranta da size na gaba ana lissafta gwargwadon wurin.
2. Jawo wani aikin ƙirar na gaba.
3. Jawo zane na musamman, a kan abin da taron taron jama'a za a yi.
4. Zaɓin kayan haɗi da ake buƙata yayin taro.
5. Lissafta na kayan, shirye-shiryensu, a yanka a cikin abubuwan da suka dace da zane.
6. Ana sanya shigarwa na hanyar da aka tsara bisa ga Majalisar Dance ta da aka haɗa.
7. Shigar da ƙofofin masarautar majalisar.

Zane zane da kuma zane

Shiryawa mataki ne mai alhakin. Wurin ya ƙuduri aniyar shigar da abin da kayan daki, ana yin ma'aunin sararin samaniya. Ana yin fasalolin cikin lissafi. Misali, lokacin da shigar da shi a cikin NICHE, ya zama dole don tuna cewa a cikin faɗin a kowane bangare ya zama dole don ɗaukar girma ƙasa da 5-10 cm.

Misali, ana buƙatar sutura a tsakiyar bangon tare da girma:

Da'awar ƙofar ƙofar gida.

• Tsawo - 2500 mm;
• nisa - 1600 mm;
• Zurfin mai amfani - 500 mm tare da zurfin 600 mm.

Daga bene zuwa rufi, jimeran tempe zai zama kilo 2600 mm, kuma daga bango zuwa ƙofar kofa - 1650 mm. Za'a iya tattara aikin majalisar hannu da Majalisar Dangane ta amfani da wani shiri na musamman (idan gogewa da su). Zaka iya amfani da shirye-shiryen da yawa da aka shirya ko kuma yin oda su akan masana'antun kayayyaki sun kware wajen kera kayan daki don yin oda. Wannan matakin yana da mahimmanci, tun da ba tare da irin wannan makirci don tattara shari'ar ba zata yi wahala ba. Mafi yawan lokuta ana amfani da shirye-shiryen shirye, zaku iya sake a cikin su. An ba da zane mai kyau.

Mataki na a kan batun: Wanke foda daga sabar gidan, wanda ya rushe sau 1000!

Kayan haɗi zasu buƙaci kamar haka:

• wando wanda zai iya zama kurma ko ba da tsoro;
• Pantograph don tufafi;
• takalma;
• sandar da kafada;
• Musamman na musamman da ke ba da gudummawa na musamman;
• iyawa don drawers;
• jagora;
• Musamman na musamman da aka ja da baya, kwanduna;
• Masu riƙe da dangantaka, belts;
• Masu rike da injin tsabtace gida, baƙin ƙarfe;
• Masu riƙe da shelves;
• Kafafukan kafafu (daidaitacce);
• Kusa.

Lissafin zane

Don yin Coupe tare da hannuwanku, ya zama dole don aiwatar da lissafin na farko, bada izinin yanke kayan girman girman da ake so. Ya fi dacewa don amfani da tsarin da aka shirya da aka shirya wanda ya dace a ƙarƙashin sharuddan samarwa don wani wuri..

Misali na lissafi:

Nau'ikan bayanan martaba na 'yan majalisar dokoki.

1. Tantance duk abubuwan ƙira tare da girma, tambura game da kayan da launi. Wannan zai ba ku damar yin gini da sauri da sauri.
2. Tantata gibba, abubuwan da zasu iya girmamawa yayin da aka tattara. Waɗannan su ne gibba don gefen, zurfin shelves, shigar da fadin kwalaye, sauke ministocin da baya, tsawo naúrar naúrar.
3. Kayan haɗi don shari'ar, wanda masu jagorori sun hada da, masu rarrafe, masu ɗaukar shelves da sauransu.
4. Yankan katin yana daya daga cikin mahimman sassa, ba tare da wanene wahalar yin tufafi da hannayensu ba. Za a yi amfani da sassan don wannan makircin:

• Bango gefen a 2600x600 mm;
• Bangon gefe a 2100x500 mm, 4 bango a 500x500 mm;
• Cikakkun bayanai game da shelves da masu zane (2 inji mai kwakwalwa. 190x49 mm, 4 inji mai kwakwalwa. A 446x150 mm, 4 inji mai girma. A 450x150 mm).

Dukkan abubuwa dole ne a lura da lambobi, bayan yankan katunan, an kuma lura da cewa Majalisar ta gudana da sauri.

Gina gini

Don gina sutura, kuna buƙatar shirya irin waɗannan abubuwan tare da hannuwanku:

Abubuwa na hali na kocin majalisar dokoki.

Fastersers don majalisar ministocin:

• Tabbatar da 6.4x50 - 100 inji mai kwakwalwa.;
• Iyakoki don tabbatarwa - pcs 50.;
• Cort filastic - Kwamfutoci 20.;
• Universal sukurori: 3.5x30 - 50 inji mai kwakwalwa., 3x16 - 100 inji mai kwakwalwa.;
• Teler kusoshi 1.2x25 - 1000 inji mai kwakwalwa.

Mataki na kan batun: Yadda za a watsa wani injin wanki?

Tsarin zamewa an ba da umarnin daban bisa ga bayanan zane.

Na'urorin haɗi don Majalisar:

• Gilashin Sheves 500x200 - 4 inji mai kwakwalwa.;
• m butpes 2x750, bumwacin 1.5;
• Flanges na sanda - 4 inji mai kwakwalwa.;
• Yana jagorori abubuwan telescopic da 450 mm - 4 inji mai kwakwalwa.;
• Morman Knobs 128 mm - 4 inji mai kwakwalwa.;
• 'Yan wasan Gilannin Sheves - 12 PCs.;
• Daidaitacce kafafu - 6 inji mai kwakwalwa.

An tattara sutura a cikin Coupe ta wannan hanyar:

1. Da farko, an tattara ginin tare da madaidaitan kafafu na musamman. Kotan ya juya tare da mai amfani, masu ba da izini a haɗe da shi a kusa da biranen da duk ƙafafun 6 a cikinsu.
2. Ga kasan tushe, ya zama dole a yi kara sosai tare da sasannin filastik na musamman ko kuma tabbatar da, ana amfani da scors don kafafu.
3. Bayan haka, bangon bangon tsarin suna haɗe, ɓangaren tsakiya, an sanya murfin majalisa a saman. Majalisar ita ce mafi alhakin ba a matsayin tsayawa ba, amma kwance a gaban majalisar ministo ta gaba. Pre-a farfajiya na sassa bisa ga tsarin da aka hada, an yi alamar alamar a karkashin masu fastereners, ramuka (ta hanyar kuma ba a warke) sun bushe.
4. Bayan haka, an ƙera bangon baya. Dole ne a bincika shi saboda duk kusurwoyi suna madaidaiciyar, ƙirar ba ta jefa ba. Majalisar ta hau zuwa matsayinta na asali, zaka iya fara shigar da shelves, sanduna don sutura.
5. Ga masu zane an sanya jagororin jagororin, akwatunan da kansu sun tattara, an sanya su a wurin.

A wannan, babban matakin Majalisar ya cika, ya kasance ne kawai don bincika kwanciyar hankali game da gidaje, amincin dukkan grai. Lokacin da kafuwa ya ƙare, ya zama dole don fara rataye ƙofofin jirgin.

Shigarwa na masu birgima

Aikin majalissar kocin majalissar ya ƙare tare da shigarwa na kofofin. Girman bude, wanda ya rage don kofofin, shine mm a tsayi da 1320 mm fadi. Idan an lura da ƙananan bambance-bambance na wasu daga milimita tare da zane, to, babu wani mummunan abu.

An ba da umarnin tsarin rufewa dangane da girman ƙirar. Ana iya yin wannan a cikin kowane ɗakin kayan gini wanda ya tsunduma cikin ƙafawar kabad don yin oda. Ba zai kawai ceci lokacin ba, har ma da kudi, kamar yadda zaku iya samun ƙofofin da aka shirya waɗanda kawai kuna buƙatar shigar. Akwai irin wannan tsari kuma a cikin batun lokacin da gidajen kawai rasa wurin da irin wannan babban aikin, da kuma kofofin don kofofin da ke bukatar isasshen sarari kyauta. A sakamakon haka, ƙofofin bude-nau'in ƙofofin tare da madubi.

Mataki na kan batun: Labulen kwalban kwalban

Aiki yana farawa da shigarwa na jagororin a saman da ƙananan ɓangaren, girmansu na wannan shari'ar shine 1318 mm. Na farko shine jagorar don na sama, an haɗe shi da son kai. Bayan haka, kuna buƙatar yin ƙirar jagora. A yayin aiki, ya kamata a biya hankali ga gaskiyar cewa ana buƙatar indents daga gefen. Me ya kamata ya kasance? Kuna buƙatar gwadawa a ƙofar da jagora, sanya alama ta hanyar da ƙofar ba ta daɗe, ta yi tafiya da yardar rai.

An sanya kofofin da farko a cikin babban jagorar, sannan zuwa kasan.

A saboda wannan, ana buƙatar mutane 2, kamar yadda nauyin ƙofar ɗaya yake.

Ga hanyoyin, dakuna masu dakuna, dakuna masu rai sun dace sosai don daidaitawa da ƙirar alƙalan tufafi, ba sa da wuya a yi su da hannuwansu. A baya can buƙatar a hankali lissafta, shirya kayan don aiki. Bayan haka, an zana da'irar taro na musamman, wanda aka sanya zane. Doors don kabad galibi ana ba da umarnin dabam bisa ga adadin da aka bayar. Wannan yana adana lokaci da ma'ana.