Kona akan itace zuwa yau - fasaha ce ta gama gari. Suna son yara ne kawai, har ma da manya. Kuma wannan ba haka bane kawai, saboda a cikin wannan azuzuwan, akwai daidaitawa, fantasy kuma ba shakka gwanin mutum (yaro). Za mu yi magana a yau game da yadda za a ƙona itace ga sabon shiga. Ga waɗanda ba su san yadda ake tsammani ba, wannan labarin zai nuna kuma ya faɗi yadda ake koyo.
Hakanan, da yawa lokacin zaɓar kayan aiki suna mamakin: "Shin zai yiwu a ƙone a kan baƙin ƙarfe?" Amsar ita ce: abin da Muhimmin abu shine cewa ƙarfe na soja kanta mai iko ne, to zaku iya qone su. Amma ya fi kyau siyan kayan aiki na musamman, tunda ya riga yana da iko mai dacewa, kuma an haɗa ɗayan nozzles. Tare da taimakonsu, zai zama mafi sauƙin ƙonewa.
Fara tare da hoton hoto
Hoton ba shi da sauki kuma mai sauki. Abu mafi mahimmanci shine canja wurin shi daidai kuma yadda yakamata tare da hoton hoto.
Kamar yadda aka ambata da aka ambata, don fara, ya zama dole don canja wurin hoto tare da hoto ko daga yanayi a kan itace. Ya kamata ya yi kama da wanda kuka yanke shawarar rubuta hoton hoto.
Bayan haka, tsari mai ƙonewa kanta tana farawa. A domin wannan hoton, duk lokacin farin ciki nozzles. Sakamakon haka, wannan shine abin da ya faru:
Airƙiri mala'ika
A cikin wannan babban Jagora, mataki-mataki tsari na ƙirƙirar hoto mai ban tsoro, wanda ake kira "mala'ika".
Ana buƙatar kayan aikin da ke gaba da kayan aiki don aiki:
- Clywood ko itace;
- Injin kona;
- Tsarin zane mai zane;
- Takarda don kwafin;
- Rawar soja;
- Ruwan hoda;
- Lobzik;
- Varnish;
- Morilka;
- Firam;
- PVA manne.
Da farko kuna buƙatar yin samfuri. Muna neman hoto da ya dace a Intanet da buga girman da kuke buƙata. Na gaba, yanke ko sayan takarda na flywood, wanda zai ci gaba da tushen.
Mataki na a kan taken: Merry crocheted taps wanda ba sa buƙatar tsari, tare da bayanin
An canza samfurin da aka buga zuwa tushe.
Sannan kuna buƙatar yanke sassan da ake so. Don yin wannan, da farko yi amfani da rawar soja, muna yin ramuka da shi. A nan gaba, zamu saka polon kuma zamu yanke. Da farko dai, mun yanke mafi yawan cikakkun bayanai, sannu a hankali zuwa ga mafi girma. Bayan haka, muna ɗaukar injin ƙonawa da ofishin da muke yin bugun jini.
Substrate a karkashin aikin da aka gama yana rufe ta hanyar. An zaɓi launi a cikin hikimarka. Mun manne da cikakken PVoue Mai cikakken bayani. Sannan mun shigar da hoton da aka gama cikin firam sannan kuma muna amfani da Layer na varnish.
Wannan shine irin zanen "mala'ika" a shirye.
Darasi na haske
Don aiki, waɗannan kayan aikin da kayan za a buƙaci kayan aiki:
- Takardar plywood;
- Na'urar don ƙonawa;
- Zane (zane);
- Takarda don kwafa;
- M fensir fensir;
- Tsaba daga kankana (kabewa);
- Scotch;
- Zane;
- Buroshi;
- Sandpaper.
Don haka, ci gaba zuwa aikin.
Don fara da, shirya tushen. Muna ɗaukar hoton plywood na girman da muke buƙata, Sanding tare da sandpaper. A farfajiya ya kamata ya zama mai santsi da santsi.
Hoto Selectane kan Intanet da Buga. Bayan haka, tare da taimakon kwafin takarda muna fassara shi zuwa folywood.
Tukwici! Domin fim din da ya kamata ya motsa tare da tsarin, zaku iya gyara su da wani yanki na Scotch.
Muna fassara zane zuwa gindi. Abin da ya kamata ya faru. Tabbatar cewa a bincika ko an zana duk layin.
Don haka mun kusanci kai da tsarin ƙonewa. Na ba da na ƙona na'urar don dumama, bayan abin da suke ƙonawa a kan zaki mai zane.
Bayan kona kwalin, ya zama dole don fenti tsarin. Muna yin hakan a hankali.
Aiki a shirye. Ya rage kawai tare da taimakon manne da duwatsu don yin firam. Mun cire aikinmu tare da ku don kammala bushewa.
Don haka, zaku iya shafa waɗannan:
- Wasu hotuna daban-daban;
- Logos;
- Daban-daban rubutu;
- Alamu.
Kuma yana yiwuwa a yi duk wannan kuma da gaske a gida. Bayan haka, kamar yadda irin waɗannan kayan aiki na musamman, wannan fasaha ba ta buƙatar.
Mataki na a kan batun: Yadda za a rabu da warin da ba dadi na kwandishan
Lush furanni
Don aiki, waɗannan kayan aikin da kayan za a buƙaci kayan aiki:
- Share gogewar ƙusa;
- Buroshi;
- Injin kona;
- Erasing gum;
- Takardar irin bukatun na Plywood;
- Copier;
- Sandpaper.
Yadda ake yin ƙonewa?
Da farko mu da, mun zabi da kuma sanin tsarin. Buga shi a kan takarda. Sannan muna ɗaukar takardar plywood kuna buƙatar girman.
Kafin fassarar zane zuwa gindi, ya zama dole a daidaita ta. Yadda za a yi daidai? Don wannan muna ɗaukar takarda na motsin rai da sanding tushe.
A kan shirya tushe, muna sa kwafin-kwafin, kuma a saman takardar tare da tsari. Don yin takarda da takardar sa ba motsi ba, muna ba da shawara don gyara su zuwa flywood. Muna fassara zane.
Muna bincika ko duk layin da aka buga. Ga abin da zane ya juya:
Kunna na'ura mai ƙonewa zuwa cikin mashigai kuma jira har sai ya samu dumi. Don haka da yake da kwane-kwane yana ci yana ci da zane.
Bayan da kati ƙone, kuna buƙatar cika asalin. Mun sanya shi bugun zuciya wanda yake dangane da junanmu a layi daya.
Don haka hotonmu ya yi daidai sosai, muna ba da shawarar ku shirya firam daga kankana ƙasusuwa. Ya rage kawai don rufe aikin da aka gama tare da varnish.
Shi ke nan, furanni "furanni" an shirya gaba ɗaya kuma yana faranta wa idanun wasu.
Bidiyo a kan batun
Mun kawo makomarku a zabin darussan bidiyo akan wannan batun: