Kona akan katako na katako ko pyrography a Fassara daga tsohuwar Helenanci na ma'anar "zane wuta". Wannan sana'a ya shahara sosai a zamanin Victoria. Kuma a yau yana sake a kan babban mashahuri. Abu ne mai matukar wahala a faɗi me yasa hakan ta faru. Don haka, a yau za mu bincika maballin masu zuwa - "ƙone a togon, ajin Jagora." Duk azuzuwan da aka gabatar sun yi nufin yara.
Dabbobi masu kyau
Don aiki, waɗannan kayan aikin da kayan za a buƙaci kayan aiki:
- Girman plywood 15 cm da 20 cm;
- Sandpaper;
- Kwafa takarda;
- Zane;
- M fensir fensir;
- Zane;
- TSSLS;
- Injin kona;
- Share gogewar ƙusa;
- Kumfa;
- Safofin hannu na latex.
Zuwa aiki.
Da farko dai, mun shirya wani tushe. Don yin wannan, phanne phanneru, sanya shi santsi da santsi. Ta hanyar kwafa takarda muna fassara zane.
Haɗe da na'urar ta Inland a cikin hanyar lantarki kuma jira cikakkiyar dumama. Muna fara aiwatar da ci. Kashe ƙananan ƙwayayen.
Abin da muka samu gwargwadon sakamakon. Je zuwa zanen fenti.
Lura! Fenti ya kamata ya zama ruwa, in ba haka ba zane kanta zai zama mummuna.
Filin zanen yana jira har sai hoton ya bushe. Anan akwai dadewa kusan a shirye.
Yanzu ya zama dole a zana zane na asali daga Tiger.
Ƙona baya.
Shi ke nan, aikinmu gabaɗaya ne.
Yanke kwamitin "Scorpio"
Don aiki, waɗannan kayan aikin da kayan za a buƙaci kayan aiki:
- Saya ya gama yankan hukumar (wanda aka yi niyya ga kring);
- Baki mai sauki alkalami;
- Na'urar kashewa;
- Zane;
- Tassalai.
Don haka, ci gaba zuwa aikin aiki.
Da farko mun sami hoton scorpio (zaka iya akan intanet ko a cikin littafin). Sketch Buga. A kan hukumar da za mu dauki zane ta amfani da takarda kwafin.
Dole ne a kunna na'urar mai ƙonawa a cikin mafita. Muna jiran cikakken dumama. Kuma fara burgin zane. Muna yin hakan a hankali.
Mataki na a kan taken: Karen da aka saƙa don ciki da hannayensu
Kar ku manta game da amincin aminci.
Idan farantinka kyauta ne, to, zaka iya rubuta abubuwan da suke so a kai a kai. Kuma kawai ƙone shi.
Yanzu kuna buƙatar fenti jirgin da aka shirya. Don wannan muna ɗaukar fenti, buroshi da ruwa. Kuma fara.
A gefe inda ake sanya zane, mai rufi tare da m da kuma verry da cire don kammala bushewa. Wannan duka, allon yanke-dinmu na kyautar sun shirya.
Kyauta ga inna
Don aiki, waɗannan kayan aikin da kayan za a buƙaci kayan aiki:
- Jirgi;
- Saw;
- Baki fensir;
- Na'urar don ƙonawa;
- Varnish launuka mara launi;
- Buroshi.
Za mu ci gaba zuwa aiki.
Don haka, da farko dai, da farko ya zama dole don shirya tushe. Don yin wannan, muna shan ruwa kuma muna yanke girman da kuke buƙata daga babban jirgi. Kada ka manta game da yarda da munanan abubuwa. Bayan mun samar da sandper Sandpaper domin ya tabbatar da tushen.
Sannan je zuwa zabin hoton. Ana iya buga shi, ko zana kanka. Mun zana ko fassara ta hanyar kwafa takarda a kan allo.
Na'urar don ƙona an haɗa shi a cikin jirgin. Muna jira har sai an yi masa dumin da ake buƙata. Muna fara aiwatar da ci. Muna yin shi har sai an yi duka zane.
Bayan kammala ƙonawa, ya zama dole don rufe allon tare da varnish mara launi.
Shi ke nan. A kan wannan, aji na ubangijinmu ya ƙare. Optionally, zaku iya zana wannan samfurin.
Yin zane-zane
Don aiki, muna buƙatar waɗannan kayan aikin da kayan:
- Takardar plywood;
- Zane (hotuna);
- Injin kona;
- Zane;
- TSSLS;
- Varna mara launi;
- Kwafa takarda;
- Sandpaper.
Don haka, ci gaba zuwa aikin aiki. Don farawa, shirya tushe. Don yin wannan, a daidaita takardar Sander Sander. Bayan canja wurin zane da aka shirya ta hanyar kwafa takarda dangane da tushen.
Ta hanyar zaki, zamu fara fitar da zane.
Mataki na kan batun: abin da za a yi idan landalie ya more
Bayan aikin da aka yi, za mu fara canza launi da aka gama. Muna jira har sai ya bushe.
Lacquer da aka rufe kuma cire don kammala bushewa. Hoto tare da gwarzo masu zane-zane a shirye!
Farantin wanka
Don aiki, muna buƙatar waɗannan kayan aikin da kayan:
- Injin kona;
- Wani yanki na plywood sigar;
- Zane;
- Scotch;
- Almakashi;
- Varna mara launi;
- Buroshi;
- Fall pelpoint alkalami (ba tare da tawada ba).
Matakan-mataki-mataki don aiki an gabatar da shi a ƙasa.
Da farko, mun ayyana abin da zane zai kasance. Bayan ka shirya plank, a daidaita shi. Sannan mun haɗe shi tare da taimakon Scotch mu Sketch.
Muna ɗaukar ball mai amfani da kewaya tsarin a kan kwane. A wannan yanayin, ya zama dole a danna guga. Bayan bincika yadda zane yake nema.
Bayan haka, mun cire zane kuma scotch kanta kuma tafi zuwa ga aiwatar da ƙonawa. Idan kuna da fantasy a cikin tsarin ƙonewa, zaku iya ƙara sabbin abubuwa daban-daban zuwa ga tushenku.
Rufe Layer na varnish mara launi. Mun cire cikin wurin da ba za mu iya bushewa ba. Shi ke nan, farantin don wanka yana shirye. A wannan, littafin mai jagoranci don masugidan novice sun ƙare.
Bidiyo a kan batun
Muna kuma ba ku darussan bidiyo don karatun kai.