Bukatar don watsa radiatbors na dumama yana faruwa a lokuta inda suka fara lakuka, ɗayan haƙarƙarin ya ba da fashewa ko fashe. A tsoffin gine-gine, lokacin da babu tambaya game da kuzarin kuzari, da radiators an shigar da shi, wanda aka sanya hakarkarinsa fiye da yadda ake buƙata.
Na'urar na'urar ta na'urar ta dumama.
Kafin a cika radiators mai tsanani, ba tare da la'akari da nau'in su ba, ya kamata ka tabbata cewa ba a kawo ruwan a cikin bututu ba. Yana da kyau a yi aiki tare.
Idan an ɗora tsarin tsarin dumama akan polypropylene ko bututun ƙarfe-filayen filastik, an watse ku.
Idan an ɗora tsarin tsarin dumama daga bututu na karfe, kuna buƙatar ƙoƙarin inganta alamun alamun a cikin shigar da fitarwa na sassan. Idan kun kasa, kuma sau da yawa ana faruwa a cikin ɗakunan Tsohon ginin, dole ne a yanke tsaga tare da gunkin ko autogen.
Ya rage don cire baturin tare da ƙugiya, wanda aka haɗe shi da bango, kuma saka wani lebur surface.
Rashin dumama na baƙin ƙarfe
Reliatsly na radiators alade wani lokacin ya zama tsari na lokaci-lokaci, amma ya cancanta.
Zane na disassebly na gilashin baƙin ƙarfe: A - kama da nipples na zaren ta hanyar 3-3 zaren da zaren; b - a cewar nipples da kuma sassan kaya; A - haɗa sashe na uku; g - grouping na radiators biyu; 1 - sashi; 2 - nono; 3 - Gasket; 4 - Short radiator makulle; 5 - Lomik; 6 - Maɓallin Radiyo mai tsayi.
Ana sanya sabon ko man rediyo ko an sanya shi a kan ɗakin kwana. Aƙalla a gefe ɗaya, ya zama dole don cire abubuwan da aka yi wa talikai ko kurma - matosai. A kan sassan daban-daban na radiators, zasu iya kasancewa tare da hagu ko zaren dama. Yawancin lokaci simintin ƙarfe na ƙarfe suna da zaren da ya dace, an bar matattarar. Idan babu dabarun rashin tsaro, kuma akwai sashe na kyauta, zai fi kyau a sani kafin amfani da ƙarfin wannan zaren da kuma abin da ya kamata mabuɗin ya kamata ya juya. Idan zaren hagu, lokacin da batsa batir na baƙin ƙarfe, kuna buƙatar jujjuya maɓallin tare da kibiya ta agogo.
Mataki na kan batun: Muna zaɓar fure don baranda: Side gefen rana
Kamar yadda ba a kwance na kowane kwayoyi ba, da farko kuna buƙatar "rushe" hoods daga wurin, I.e. Juya su a kan kwata na juyawa a garesu na baturin. Sannan hoods suna juya don haka rata zuwa milimita da yawa an kafa tsakanin sassan. Idan ka saki hoods fiye da haka, gaba daya ƙirar za ta fara etoni da nauyi da kuma kokarin da ake rakiyar. A lokaci guda, zaren na iya matsar. Wannan wannan baya faruwa, mataimaki ya kamata ya sami mataimaki zuwa ga baturin da aka watsa da zai hana nauyinsa.
Yawancin lokaci ba a tsayar da tsoffin hasken radiators ba ta hanyar fungeri da sassan "fashe". Don hana irin wannan baturin, dole ne ka yi amfani da bututun shara ko sanda. Shafin haɗin yana warin motsi madauwari. Da zaran ya watse isa, hoods suna juya. Idan kun kasa kwance a karon farko, ana maimaita ayyukan.
Idan babu isasshen ƙarfi don watsa baturin, kuna buƙatar ƙara maɓallin matsin lamba. Ana amfani da bututun talabi na talakawa, wanda yake hidima azaman Rabba.
Hakazalika, nippedded nipped ne ya juya ga nauyi radiators.
Idan ba zai yiwu ba a watsa batir-wani Baturin-Iron da aka yi la'akari da shi, ya rage ya yanke shi niƙa ko autogen ko rarrabuwa cikin mummunan matsayi na wani mai jingina. Smash ko yanke, kuna buƙatar sashe a hankali. Bayan wannan aiki, watakila ya waye wani kama tsakanin sassan, baturin zai iya watsa ragowar sauran sassan don adanawa.
Amfani da "maɓallin rufi" ko ruwa na WD baya bayarwa, tunda a cikin tsoffin batirin na katako, an rufe shi da flax da fenti, kuma ruwa ba zai faɗi akan zaren ba.
Rashin hankali na aluminum dumama radiators
Makirci na aluminum dumama radiators.
Aluminum ko dumama radiators suna warwatsa Hakanan don jefa baƙin ƙarfe, amma akwai bambance bambance-bambance.
- Ya kasance ƙwararrun maɓallan makullin da nipples;
- A matsayinka na mai mulkin, waɗannan sababbin kayayyaki ne, don haka idan aka ƙi karɓa, ba lallai ba ne don amfani da irin wannan ƙoƙarin kamar yadda yake cikin Jarurruka;
- A gaban matosai da hoods, akwai synthasses s da d, bi da bi, don hagu da dama zare.
Mataki na kan batun: abin da za a yi, ba tare da disassembling ba, shawarar masanin gwani
Tsakanin sassan don rufe lambobin karfe an shigar dasu. Bayan ramuka, ya kamata su goge, da tsabta da kuma adana don mai biyun baya.
A karkashin matosai, yawanci ana yin gasket da silicone, lokacin da aka yi amfani da su kuma dole ne a maye gurbinsu da sababbi.
Yawancin samfuran sassan aluminium suna tsoratar da su. Kuna iya watsar da su, amma ba zai yiwu a tara ba.
Don Disassembly, zaku buƙaci kayan aiki da kayan:
- Makullin da aka ƙissbly (5/4 inci - don jefa batirin ƙarfe, inch - don aluminium ko kuma bimetallic);
- mabuɗin gas;
- daidaitacce (tsarkakakken) maɓallin 2-3;
- Bulgaria tare da diski akan karfe;
- lowtorch;
- Gas mai (autogen);
- Wani bututun karfe.
Wajibi ne a yi la'akari da cewa aikin da aka bayyana shi ne datti da amo. Sabili da haka, dole ne a haɗa shi da maƙwabta.
Ta amfani da waɗannan shawarwari da shawarwari kuma idan akwai kayan aiki, rarrabe da tara kuma tara batura batir tare da hannuwanku.