Hiking gani daga cigaban aikata da kanka
Kyakkyawan lokaci, abokan ado!
Ina ba ku tunaninku da gwaje-gwajenku a kan sawa na itace.
Daga cikin duk waɗanda suke da hannu a rayuwata, na yi m imani - Na sha matafiyi a cikin gandun daji (yawon shakatawa, naman kaza, da farauta) ba a buƙata. Banda daya - zuwa Uwargida.
Duk sauran bukatar karancin gangar jikin bishiyar ba wanda ya dace. Matafiya baya buƙatar aiwatar da aikin gini, gawar gandun daji, da girbin dabbar da aka kashe a cikin kundin kayayyaki. Duk aikin da ke kan shirye-shiryen filin ajiye motoci an samu nasarar yin shi ta hanyar wani gatari da gatari, kuma ba waɗannan "Hasusul Skramer ba), a cikin wanda yawancin abokan aikinmu suke juya kayan su).
Tabbas, idan manufar hawan shine don aiwatar da ayyuka waɗanda ke buƙatar takamaiman kayan aiki - kayan aiki zai ja. Amma yanzu akwai tattaunawa game da babban mai tafiya na gandun daji (yawon shakatawa / namomin kaza), wanda dukansu akwatunan da ke kan sa, kuma dole ya dace da wukar ruwa (IR).
Me ya sa zai iya kasancewa cikin gandun daji ya gani? Dangane da abubuwan da nake gani, ganga tare da diamita na har zuwa 100 mm yana da sauƙi a sare (gatari da shi bisa ga kowane), amma fiye da 100 - mafi sauƙin cika, sauri da ƙarancin kuzari sosai. Wannan jawabi yana nufin wurare tare da m na coniferous mai laushi. Oak, Beech, kama da sauran maciya bukatar abin sha nan da nan, amma ba na tafiya can.
Pegeri, Napnik, ba manyan itacen da ya fi sauƙi a ƙare ba. Daga "manyan itacen wuta" da alama a gare ni kawai daga shiga don nodium.
Ina tsammanin diamita yana da kyau sosai ga 150-200 mm. Tare da tsawon 1.5-2 m, ɗaya irin wannan log (bushe) zai yi nauyi. 30 kilogiram da na'urar dumama ba za su rushe lafiyar matafiyin ba. Log na 30cm / 2m zai auna nauyin Ok.70 kg - dan kadan.
Don haka, muna da koyarwa game da "fitsari":
Mataki na kan batun: Injin kayan masarawa don bushewa: Yin abubuwan shaye
- Yawan yiwuwar rikice-rikice tare da diamita na 20 cm (Max. 30 cm);
- Mafi qarancin nauyi (mafi kyau mara kyau);
- Yanayin amfani da lokaci, da wuya;
- Akwai lokacin da za a shirya don amfani (babu buƙatar yin snatch da sawing);
- Wuri a cikin kwanciya na jaka sharabi (ba wuƙa ba kuma ba makami ba).
Na waɗanda aka fi sani da ni, nau'ikan saws (sarkar, Disk, ƙuƙwalwa) Na zaɓi surukin-surukin, a matsayin mafi sauƙi.
Akai-akai amfani "Hacksaw" yana da babban nauyi (mai kauri da kauri, m rike) saboda ƙirar sa. Shahararren aljihun da ba a yarda da shi ba don ɗaukar propyl propyl (har zuwa 6 mm) kuma in mun gwada da kintinkiri ya zama mafi girma fiye da nauyi.
Asalin ya gani yana buƙatar hugar ruwa, ɗaure zane da yadin da aka saka. Duk abin da ke cikin a cikin mintuna 5.
Tsawon hancin da ya wuce ya wuce diamita na log (mafi girma - mafi kyawu, zai fi dacewa a yanka) kuma a cikin batun mm 300 (mai kama da na yau da kullun na ƙarfe na ƙarfe).
Guda biyu na hawa madaidaiciya da biyu m5 m5 m00 tare da kwayoyi, sagin ruwa - da kuma kit ɗin duka don gani.
Yin firam da Majalisar Saws kimanin. Minti 10. A matsayinka na screed yayi amfani da yadin da aka yi amfani da shi daga jake jaket. Sizes masu girma dabam sun ga lafiya. 30 cm, matsakaicin zurfin yana yankan zuwa 15 cm. Hakanan zaka iya rubuta log to 30 cm - a da'irar.
Sawgin gangar gangar jikin da diamita na 13-14 cm. Yanke biyu na mintina 5 kowannensu (dukda cewa yana iya zama). Zan gama wannan batun rabin sa'a daidai, kuma sojojin da na bari ba tare da ma'auni ba.
Mai sag ɗin da aka soke, sandunansu - ga wuta, zane - a cikin jakar baya.
Kwarewar farko da aka yi canje-canje a cikin kayan aikin TTX:
Mataki na kan batun: Bayanan bayan Bach na Angular
1. Saw ya kamata ya zama transvere (siffar hakori shine daidaitaccen alwatika mai daidaitacce ne mai gefe biyu). Irin wannan abun ba za a iya yanka dabam ba, kamar yadda gicciye - don haka ba lallai ba ne. Bugu da kari, irin wannan mai irin wannan shine bugun jini (kuma a can, da baya) ma'aikata;
2. Tsawon lokacin da yajin 300 a bayyane bai isa ba. Add of Amllitude
Bushewa (gamsuwa da hannu) ba ya wuce 60 cm. Mafi dacewa Ina la'akari da tsawon lokacin jirgin ruwa na iya duba tsawan jirgin ruwa wanda yake tsoratar da platult, ba tare da lalata parquet). Don kwanciya a cikin jakarka ta 40 cm - kanta. Don haka - tsawon shine 400 mm;
3. Saki na hakora gani ya isa. Kuma itacen ba ya bushe a cikin gandun daji, da kuma gangar jikin yayi ƙoƙarin matsa zuwa matsa yayin da aka samar da shi. Jimlar saki (nisa na propyl) ya kamata 2-3 kauri daga zane. Moreari mafi kyau, amma zai zama da wahala a yanke - babban itace zai zama dole "unzip";
4. Aƙalla diagonal guda ɗaya a cikin firam ɗin ya zama dole. Misali, wani layin da aka haɗa saman gaba tare da tsakiyar (ko akasin ƙarshen) struts. Saboda haka ya yi aiki don ya yi ƙasa a babban taron kwamitin (daga kaina).
Na yi wani sabon salo ga lokacin bazara - na sayi mafi arha Hacksaw, cire wani ɓangare na girman 30 mm, a yanka a ƙarshen mm, a yanka a ƙarshen kuma sanya shi a cikin kwanciya.
Tarin Saws ya mamaye mintuna 10-15, an kara Diagonal.
Girman firam ɗin Ok 45x45 cm, tsawon zane na ok.45 cm, zurfin zubar 20-25 cm. The sagin ruwa daga kwarewar farko na gaba don kwatantawa.
Sawed da diamita na 20-25 cm. One propyl ya mamaye kimanin. Minti 5. Abu ne mai dacewa a yi aiki, babban motsi - kan kanku (ana amfani dashi don yin sauri)
Mataki na a kan batun: nau'ikan da aka yi da aka yi zafi
Ra'ayoyi, dangane da sakamakon aiki:
1. kauri daga cikin sandunan da aka yi amfani da shi don firam ya kamata ya zama 3-4 cm. Kuma karfin gwiwa ya isa, kuma yana kiyaye mafi dacewa;
2. Ya kamata a sauya ta da babbar ƙungiya ta hannu (alal misali, daga Galvanized) - Canvas ya juya akan madauki na kunkuntar da aka zana.
Don haka, zan iya karanta cikakken aikin kayan aikin motsa jiki - Topor, MPL (MPL), zane.
Yin nadawa wuka tare da itacen cike da gunki na koyaushe tare da ni.