Sauya gilashi a ƙofar ɗaki - matsalar da ba ta da rack da rayuwar yau da kullun. Gyaran ƙofofin koroome suna halatta don sanya shi kanka, idan kun san ƙa'idodin shigarwa na ingantaccen shigarwar shiga a ƙofar.
Sake haihuwa na tsohon glazing ko sauyawa
Kafofin ciki tare da Gilashin Harshen dacewa da yanayin rayuwar kowane nau'in ɗakin.
Kafin ciki tare da gilashi ana santa ta hanyar aiki.
A lokaci guda, ƙofofin tare da shigar da wuraren da aka dace da gilashin ba wai kawai tare da na ado da fasali:
- Fadada sararin dakin gani;
- Dakin yana cike da ƙarin tushen hasken halitta.
A cikin lokacin aiki na bude budewar bude, gilashin don ƙofofin ciki ba wuya ga yawan dalilai daban-daban:
- Lalacewa.
Kofofin da ke tare da gilashi daga kowane abu kayan masarufi ne. Aikace-aikacen ɗan ƙaramin ƙoƙari ne lokacin rufe sash yana haifar da ƙaramin lalacewar Glazing. Musamman ma batun fasa fasa abubuwan da aka samu ya dace a gaban karamin aiki mai aiki a gidan. Baya ga warwarewa, taga a ƙofar an karye tare da lokaci, yana zubewa tare da sunadarai ko dai kwari ne akan lokaci.
- Sake haihuwa da annashuwa.
A baya can, abun shigar da gilashi a ƙofar bai bambanta sosai da zaɓi iri-iri. A yau don siyan gilashi don ƙofar halartar inganci (gilashin fillive, filastik mai laushi, madubi, Sandblasting da sauransu).
Kayan ado na yau da kullun na zamani
Haka kuma, a kan lokaci, kamar yadda aka sani a sama, gilashin gilashin suna da tsarkakakken tsabta. Don haka sabon tsari na gida yana buƙatar zane mai laushi, kuma ƙofar tsohuwar ƙofar katako za ta kasance a shirye don yin shekaru dozin bayan sabuntawa.
- Sake gini da bidi'a.
Canjin kewaye daidai yana daidaita yanayin rayuwar zuciyar mutum. Glazing kofofin, a matsayin wani bangare na dakin ado na dakin, na iya taimakawa idan akwai sha'awar canza wani abu kadan a rayuwarsa, amma kawo sabon kwarara a ciki.
Mai haske ado na zabin gilashin
Ba lallai ba ne a sayi sabon gilashi don ƙofofin, ana iya sake fasalin shi da hannuwanku: sanya gilashin gilashi, crack fim ko fenti.
Mataki na farko akan taken: Fasaha na keɓaɓɓen labule: yankan masana'anta da aiki na seams
Ƙofar 'yanci daga mai karye: shiri da kayan aiki
Koyaya, don haifarwa kowane ɗayan abubuwan masu gyara, za a buƙaci wasu kayan aiki, wahayi da sa'a kyauta.
Kayan safofin hannu na gilashi
Kafin canza gilashin a cikin gidan intanet, ya karye ko lamba, yana da mahimmanci don samun kayan aiki wanda ba wuya da kayan hatsi:
- Safofin hannu ba su sassare.
Safofin safofin hannu dole ne a yi shi da abu mai yawa, amma kada ka ji daɗin kame da aka saka a gyaran gilashin glazing da hannayensu.
- Rarraba mai yawa Scraddriver.
Ana buƙatar sikirin siket ɗin don yin riƙe da glazing a cikin katako na katako na Platts (Sweckes). Idan ƙofar daban-daban zane, alal misali, wanda ya hana daukar hoto, to, ba za a iya buƙatar siketdriver ba a aiki.
- Chish.
Ana buƙatar chisel a zahiri don duk ayyukan da kayan itace na itace ke da hannu.
- Karamin guduma.
Hakanan ana buƙatar guduma don ɗaure bugun jini tare da ƙananan carnations. Game da aiki tare da ginin marubuci, zai fi kyau a sami guduma mai roba don samun ɗan ɗan ƙara zuwa cikin wurin yayin taron jama'a.
Kayan aiki don aiki tare da ƙirar ƙofa
- Hoton Stative.
Ana iya buƙatar wannan kayan aiki don cire tsohuwar seadant a wurin glazing.
- Juji mai laushi ko teku.
Manne da sealants don gyara gilashi
Zaɓin nau'in kayan don shrinkage na gilashi mai yawa ya dogara da takamaiman samfurin kuma yanayi. Ginin gilashin ƙofar ba kawai ke zaune kusa da yanka mai tsayayyen zane ba, amma kuma yana hana ta rataye shi wajen aiwatar da aiki aiki. Samfurin da aka ƙaddara mara kyau a cikin zane na iya zama mara kyau matsa ko da ƙaramar daftarin aiki.
- Jakar takarda, akwatin kwali ko yanke takarda mai laushi.
Za'a buƙaci takarda don kammala kuma ba da yarda da juriya na tsoffin ƙofofin glazing.
- Tsintsiya tare da diba da yanki na filastik, injin tsabtace.
Za a iya tattara ƙananan gutsuttsari ta hanyar filastik
Scoop da tsintsiya zasu taimaka wajen tattarawa daga bene waɗanda suka sauke ragowar gilashin da ya karye. Fartin filastir zai taimaka wajen tattara ƙananan guntun gutsuttsari wanda rigar rigar tana da rashin aminci. A saboda wannan, filastik yana da dumama a hannu zuwa filastik, kuma ya yi birgima a farfajiya na bene ko tsarin jima'i.
Tsarin hadarin rami mai kariya da sauyawa
Don sanin hanyar da ayyukan da ƙofar zaɓe za a saki daga tsohon glazing, yana da daraja a gane nau'in ginin.
Mataki na kan batun: Menene Panoram Shalzing Balzony, Ci gaba da Cons
Daidaito yayin da gilashin taro
A takaice dai, kuna buƙatar ƙayyade hanyar da sauri a cikin sash, in ba haka ba zai yi aiki sosai lafiya. Don shigarwa na shigar gida a cikin gine-gine masu zaman kansu, ana amfani da tsarin:
- Inda aka gyara fayil ɗin ta hanyar saurin bugun jini ta hanyar sanya hanyar - kayayyakin garkuwa;
- Inda an saka gilashi a cikin rami na sash - zane yana da gefe ɗaya na tsagi don shigarwar;
- Inda an saka gilashi a cikin tsagi na ƙirar kanta - waɗannan su ne toshewar alama.
Pilencated clawason zane
Kofofin da ke da gilashin launin ruwan da ke buƙatar a zahiri ana hana su gaba ɗaya abubuwa. Gilashin a cikin tsari iri daya kuma galibi suna bangarori. Abubuwa da yawa masu rikitarwa na iya haifar da Jagora na gida cikin rikicewa, amma kada ka firgita. Canvas ne ya halatta kar a rarraba gaba daya, kawai kuna buƙatar kyauta ga jerin gilashin da kanta, idan kun san ƙirar shine Etofulau:
- a tsaye goyon baya (dogon lokaci) - racks na zane;
- A kwance (transverse) goyon baya - rike da rakunan da ke da alamu da kuma shigar da gilashi;
- Pilenks abubuwa ne na bakin ciki na shigar da aka sanya tsakanin goyon bayan tallafi;
- Aljirar na ado wani abu daya shine goyon baya iri ɗaya, amma ana amfani dashi azaman kayan ado.
Dukan Dearfafa Dukan Dutse
An tattara masu inganci masu inganci gwargwadon ka'idodin karu / Groove, kuma babu matsaloli tare da disassembly. Wato, kada kuyi watsi da matsalar tsaftace cikin ruwan teku, wanda ke riƙe da ƙirar da ke gaba. In ba haka ba, kun zama mai mallakar ingantaccen samfurin da aka kirkira ta hanyar hannu.
Tsarin rarrabewa da samfurin tashin hankali abu ne mai sauki: an cire na sama na sama, bayan wanda babashin gefe yake motsa. Sauran bangarorin zasu zama kamar a cikin zanen. Babban abu shine samar da aiki a kan madaidaicin kwance.
Bayan nasarar rami na tsohuwar glazing, irin wannan wuri an yi shi ne a cikin shigar da sabon gilashin. Ana iya tattara zane a cikin jerin abubuwan da ba a sani ba, bayan da ake gyara ƙofofin ƙofofin ciki da za a iya kammala.
Kayan samfuran zamani tare da groupes na musamman
Yawancin zane-zane na ƙofar da aka sanya na zamani suna sanye da tsintsaye na musamman inda gilashin don an saka. Kafofin ciki tare da gilashin da aka sanya ta hanyar tsagi na musamman wanda ke haifar da daidaitawar sash na musamman: Tsarin subing, Classic Swing, pendulum da sauransu. Sauya gilashin a cikin kofofin da irin waɗannan samfuran ana yin su kawai tare da hannuwanku:
- Ana cire zane daga cikin kwandon akwatin kuma an adana shi a kan jirgin sama mai laushi - yana da kyau a 'yantar da wuri a ƙasa ko kuma amfani da babban tebur;
- A ƙarshen gefen sash, ana samun ingantaccen tsagi mai ban mamaki, inda aka sa gilashin da aka saka;
- An fitar da tsohuwar ƙofofin daga tsagi ko kuma sauransu;
- Sabuwar yanke na gilashin ado na ado, zaɓi da kuma sassauke ƙarƙashin girma a ciki.
Mataki na a kan batun: Matakan gyara a cikin ɗakin kwana, da kuma yadda ake gyara da hannuwanku
Gilashin saka a cikin ƙofofin zamba yana haifar da saman tsagi
Abubuwan da aka shigar ya fi yawa a saman samfurin, kuma ba za a katange shi ba. Lokacin da yake aiki, an bada shawara don bijirce dabarun aminci, kuma amfani da safofin hannu da aka horar da su don kare hannu, a yanka takarda da filastik idan ya cancanta. Ana buƙatar daidaito a cikin dukkan ayyuka, kamar yadda shigar gilashin gilashi a cikin karamin grooves ba sauki.
A lokacin da aiki na iya buƙatar rufe gilashin gilashin da ke buƙatar zaɓaɓɓu cikin girma a gaba a cikin abubuwan ƙwarewa.
Sauyawa Abubuwan da aka shigar tare da bugun bugun jini: garkuwa da garkuwa
Gilashin don ƙofofin ciki a cikin ƙafar gargajiya na zamani (don mutane da yawa sun riga kacalmetelet), an gyara shi a sash tare da taimakon tsaka-tsakin katako - bugun jini. Don haifar da aikin hedkwatar, ya fi kyau saya sabo, tun lokacin da tsofaffin sassan, har ma da daidaito mai zurfi, yana iya lalacewa.
Tsarin sash, inda ake riƙe gilashin ta hanyar bugun fenari
Don haka, muna shirya gado a ƙarƙashin sabon gilashin ta wannan hanyar:
- Hanyar sauƙin karba lokacin da ake amfani da sikelin da guduma, mukan saki kadan sakoli;
- An cire bugun fenari na farko a sama, bayar da cewa ba a rarraba zane da madaukai ba;
- An cire ragowar tsoffin gilashi da gas;
- An cire tsohuwar ƙirar rufe ido a gefe ɗaya na gado;
- Bed a ko'ina an tabbatar da kewaye ta da grid ɗin da aka saba da shi ko takarda.
Ana shigar da sabon gilashin ciki a cikin Lumen, sa mai saƙa pre-silant ko silicone. Idan ya cancanta, yi amfani da gilashin gilashin gilashi. An samar da bugun jini a saman, wanda za a iya fentin a gaba, wanda za'a iya fentin shi a gaba don sautin da ake so ko sayen analogs mai sassauci daga filastik. Tabbatar da abubuwan da ke riƙe gilashi a ƙofar kwamitin kwamitin, zaku iya kammala ƙananan silicone.
An kwace ruwan teku a cikin awa daya, saboda haka ana ba da shawarar kada ku yi amfani da ƙofar da ke cikin wannan lokacin.
(Muryarka zata kasance farkon)
Loading ...