Yi kyawawan filaye na iya zama kusan daga komai. Sabili da haka, a yau muna tayar da hankalinku a cikin kulla aji a kan gilashin gilashi daga gypsum tare da hannuwanku.
Gypsum abu ne mai kitse mai kitse wanda zaku iya yin komai. Gypsum Vases zai yi kama da m, ko ado ciki, ko zama mai ban sha'awa ga kowane biki. Bayan duk, kamar yadda kuka sani, mafi kyawun kyauta kyauta ne da hannuwanku naku. Kuma idan har akwai kyauta wanda kuma yana da amfani a matsayin bututu, to, babu ƙarin kalmomi!
Bari mu duba wasu azuzuwan manyan labarai don ƙirƙirar gypsum mai ban sha'awa Vaz tare da hannuwansu.
Gypsum vazochka
Don yin irin wannan gilashin gypsum, ɗauka:
- Kwalban filastik 2;
- gypsum;
- Gypsum putty;
- Bandeji.
Farawa, da farko rufe farfajiya na tebur (ko wani aiki na aiki wanda zaku yi vase) Cellophane ko fim ɗin abinci. Dole ne a yi shi don haka bayan ƙarshen aikin filasta ya fi sauƙi a cire.
Sypsum ya yi kuka da ruwa zuwa daidaitaccen lokacin farin ciki mai tsami, jira har sai da a kama kadan. Sannan a fitar da da'irar - zai zama kasan gilashin. Daga sama da kan wannan da'irar, mun sanya kwalban ya fara amfani da gypsum.
Lura! Aiki dole ne ya yi aiki da sauri, kamar yadda gypsum yake da dukiya da sauri.
Yanzu an nannade da sandunan gypsum mai sanyi, bar na kimanin minti 30 zuwa ga dippsum dipum. Wajibi ne a rufe shi da filastar da filasikai kawai a tsakiyar don haka daga baya za ku iya cire kwalban.
Nan gaba muna sakin wasan filastar da kuma shafa shi akan bangarorin. Sa'an nan kuma wani yanki na bandeji, da sake sake saƙa. Ƙananan ɓangare na gilashin gilashi ya shirya. Don saman zaku iya ɗaukar ƙarin tsari, misali, tãarar filastik.
Mataki na a kan taken: mayafi ko Orglea - menene tulle ya fi kyau?
A na sama na gilashin gado guda ɗaya - wani bandeji na katako, putty, wani yanki na bandeji da Layer na Putty. Domin karin haske don zama mai ƙarfi da kwanciyar hankali, zaku iya amfani da ƙarin yadudduka na Putty, kuma bayan kammala bushewa zuwa Sand Sand Sandpaper.
Gypsum Blank mun aika zuwa bushe a ranar a cikin wurin dumi. Don ciwon gilashin gypsum, zaka iya amfani da acrylic ko kuma varnish fenti.
Littattafan katako
Tarkar da akwatin daga ruwan 'ya'yan itace, mutane kaɗan suna tunanin cewa tare da taimakonta zaku iya yin kayan kwalliya ko tukunyar fure.
Muna bukatar:
- akwatin 'ya'yan itace;
- gypsum;
- goge;
- Kaftan filastik ko wani karfin irin wannan zurfin da kake son samun rami a cikin gilashin.
- acrylic pants.
Yanke akwatin domin kwafin blank last kana buƙatar tsayin daka. Sypsum ya haƙa har zuwa daidaitaccen lokacin farin ciki mai tsami kuma zuba a cikin akwatin.
Yayin da filastar ba ta daskarewa, sanya kofin a cikin akwatin tare da filastar, samar da rami don tsirrai.
Bari mu bar gilashin har sai an gama bushewa. Sannan a hankali cire akwatin kuma a dauki kofin. Sandpaper shine sanding a farfajiya. Kwallan ya kusan a shirye, ya rage kawai kawai don yin ado da shi.
Mun zabi hanyar amfani da fenti tare da lace stencil. Don yin wannan, sun ɗauki kaset ɗin ƙafafun kafa kuma sun tabbatar da su a kan filastar Billet.
Fesa-fenti mai cike da gilashin gilashin, zaku iya rufe sashin ciki. Bari mu bushe fenti da cire jeri ribbons.
Irin wannan gilashin za a iya amfani dashi azaman tukunya don ragi ko, idan kun yi rami mai zurfi, sanya furanni a ciki.
Wani zabin
Wannan aji na Jagora ya zama mafi wahala, amma duk da haka, yana da ban sha'awa sosai don yin irin wannan fitilun, amma zai duba cikin cikin kwalliya!
Don aiki, muna buƙatar:
- gypsum;
- filastik;
- twine;
- Cika form (zaka iya amfani da fom don yin burodin tsari da girma);
- Bawo (zaka iya amfani da kowane karamin bayani).
Mataki na a kan batun: Yadda za a dinka jaka tare da bawul ɗin nama tare da hannuwanku: tsari tare da bayanin
Yi wasa don zuba murfin murfin don yin burodi. Filastina mirgina tsiran alade da mirgine sama da girman sifar da, saboda haka, ganuwar ta gaba ta gilashin. Mun shayar da filastar a cikin jihar mai kauri mai tsami.
A kan filastik muna sanya kwafin seashinku, to, sanya shi a cikin mold. Muna cike da filastar ta hanyar 3-4 cm. Jimlar za ta buƙaci ganuwar 5 don kwanon rufi (zaku iya yin siffofin triangular da regangular).
Duk da yake gypsum bai zama cikakke ba, bayan kimanin minti 10-15 ya kamata a cire shi daidai da hanyar. Shirye shirye-shiryen shakatawa na nan gaba ya bar har sai kammala bushewa.
Lokacin da fale-falen burmiyoyin suka bushe, kuna buƙatar rawar jiki ramuka akan tarnaƙi. Mun haɗa fale-falen buraka da danganta su da igiya.
Mun sanya ƙirar da aka tattara a tsaye, kuma ƙasa tana zuba ta filastar. Bayan minti 15-20, muna cire ganuwar, ƙasa a cikin hanyar innabi, muna barin har sai an gama bushewa. Ramuka na hana a ciki don haɗawa da ganuwar.
Yanzu kuna buƙatar yin amfani da cikakkun bayanai. Kuna iya amfani da zanen acrylic na kowane launuka. Kuma zaka iya amfani da kayan aikin karatu. Misali, irin wannan launi na kayan kwalliyar, kamar yadda a cikin hoto, ya juya idan kun haɗu da kirim don takalma tare da man kayan lambu.
Sannan duk sassan an rufe su da varnish kuma suna danganta igiyoyi.
Tabbas, a cikin irin wannan fonase, ba kwa buƙatar zuba ruwa, amma zaku iya sanya karamin gilashin ko ganga filastik a ciki don a iya sa sabon bouquets a cikin gilashin.
Don haka, sanya filayen vases daga gypsum da sauƙi, ko da yaro zai iya jurewa da shi. Tabbas, a karkashin kulawar manya. Babban abu shine a nuna fantasy kuma sha'awar samun kayan kwalliyar.
Bidiyo a kan batun
Duba kuma bidiyon da ƙa'idar masana'antar Gypsum vaz da tukwane filayen da aka yi bayani.