Plaster akan itace shine mai sauƙin samun dama da kuma mai sauki. Haɗin wannan maganin yana da sauki sosai:
- yumɓu;
- yankakken bambaro;
- ruwa.
Plastering a kan itace
Kakanninmu da aka yi wa ganuwar bangon.
Fuskantar itace kafin plastering
Surccoing na gidan katako daga cikin Duch
Kafin fara Sugcodo, kuna buƙatar ɗaukar adadin yumɓu kuma kuna ba shi preprit da aka tsarkake shi. Sannan wajibi ne a zuba ruwa kuma ya shafa shi da hadarin kai, ta hanyar kama da kullu. Don sakamakon taro da kuke buƙatar ƙara yankakken bambaro, zuba ruwa kuma a haɗa kowane abu da kyau. Bayan irin wannan magudi, yumbu bar "ripen" na tsawon awanni 2-3.
Lokacin da mafita ga plastering an gauraye, zaku iya fara sarrafa bangon.
Anyi ƙoƙari tare da dunkule na bango suna da laushi tare da ruwa ta amfani da tsintsiya na yau da kullun ko Macklove. Sannan ana amfani da mafita a gare su, wanda a cikin aiwatar da zubar da grater a cikin yankin bango.
Idan a yayin aiki na bangon bangon da kuka kasa ciyarwa, kada ka karaya, ana iya amfani dashi ko da gobe. Don yin wannan, zai zama dole don ƙara ruwa kaɗan na ruwa a ƙasa kuma ya shafa shi da haɗin kai.
Drangco akan bango na katako
Lokacin da bangon bango ya ƙare, suna buƙatar ba da lokaci don kuje. A wannan lokacin, za a iya kafa fasa fasa a saman, wanda za'a buƙaci don lure yashi tare da yashi. Amma idan ka yanke shawarar goge bango bango, to lallai ne ka toshe dukkan saman.
Drangco akan bango na katako
Lokacin da bangon bango ya ƙare, suna buƙatar ba da lokaci don kuje. A wannan lokacin, za a iya kafa fasa fasa a saman, wanda za'a buƙaci don lure yashi tare da yashi. Amma idan ka yanke shawarar goge bango bango, to lallai ne ka toshe dukkan saman.
Lokacin da filastar ta zama tilas, ana buƙatar bi da ita da Alabaster a cikin ruwa.
Daga yadda mai mai zai zama abun da ke ciki na yumbu, yawan bambaro ya dogara.
Har zuwa yau, bambaro yana sauka zuwa bango, kuma maimakon kayan, ana ƙara amfani da abubuwan da aka saiti na haɓaka. Suna taimakawa ƙarfafa linda kuma suna hana bayyanar fasa. Wakilin mai haske na kayan haɓaka na zamani shine polypropylene fiber na Polypropylene, da na fibers wanda ya kai 15mm. Irin wannan maganganun kwararrun magungunan da aka ba da shawara don amfani idan kuna shirin fenti saman bangon fenti.
Mataki na farko akan taken: Kullewar Magnetic a ƙofar - dokoki don zabar kulle-kullen mutum don ƙofar gida
Ana iya dafa wannan abu mai sauki kayan da kanka. A saboda wannan, jakar Breded cikakke ne ga wannan, kamar daga karkashin hadawar da aka gina, don haka daga sukari ko gari. Kuna buƙatar yanke shi da tube na 15mmm, kuma ya kasu cikin zaren da za su yi kama da fibers na polypropylene.
Shiri na bango muhimmin mataki ne na filastar bangon. Lokacin da tattaunawar ta tafi game da plastering tsarin katako, tsari na shirye-shiryen shine yin amfani da sha.
Fasaha ta Drangco
Sugcodo a kan katako
Rance shine tsiri na clywood ko itace. Kaurin su ya bambanta a cikin 3-5mm, kuma faɗin shine 15-20mm. Cire irin wannan rawunan a cikin layuka 2:
- Duranka (an cakuda shi daga rufin, yana motsawa zuwa ƙasa, da kuma kauri daga cikin tube shine 3-4m);
- The fitarwa (kauri daga irin wannan duch ne 4-5mm, kuma matakin an sanya shi perpendicular a mashaya, a sakamakon abin da aka kafa lattice na clastal).
Don gyara bambance-bambancen katako suna amfani da ƙusoshin ƙusoshin ƙusoshin ƙuso, tsawonsa shine 25-40mm.
Shigarwa na Duranki.
Don cika voids tsakanin madaukai, ana amfani da mafita, wanda ke ba da gudummawa ga yawan abubuwan da ke faruwa a itacen.
Daga ta yaya nesa bangon sanannun, adadin kayan cinye a 1M2 ya dogara. Kaurin kauri daga cikin murfin katako na katako dole ne ya zama sama da 20cm, saboda tsananin sofa zata ba Duranka don matsawa, bango zai juya zuwa fasa tare da lokaci.
Don haɓaka sauti da rufi na ganyayyaki, yana yiwuwa a rufe kayan da Pergamin, ya ji ko ayyukan gida. Amma, kafin amfani da waɗannan kayan, dole ne a bi da farfajiya tare da maganin rigakafi kuma don ba da iska.
Idan kun ware ganuwar, to ba kwa buƙatar rigar su da yawa kafin lakabi, yana da kyau a ɗan ɗan ɗan ɗan ɗan wasa.
Lokacin da filastar ta bishiyar take amfani da bishiyar a ƙarƙashin launi mai zuwa ko kuma ta hanyar wallen bangon waya dole ne a rufe shi da haɓaka 5 cm a kowane gefe.
Hanyoyin zamani na plastering a kan katako
Sugco a kan itace.
Sugcoco na itace yana buƙatar amfani da gaurawar ƙwararrun masana'antu, kazalika da plaster na duniya, wanda aka rarrabe shi da babban matakin m.
Mataki na a kan batun: shigarwa na jirgin ruwan mai zafi: kayan aiki da ake buƙata da kayan
A matsayin tushen irin waɗannan abubuwa su ɗauka:
- Gina Gypsum;
- Haske
- Musamman polymers masu son su.
Girke-girke na iya haifar da mafita mai zaman kanta a kan itacen da aka bayar a cikin tebur.
| Fasaha shimfiɗa | Rubuta katako Ƙira | Rabbai na kayan aikin | ||
| Sumunti / lemun tsami | Yashi | Ɗan jipsum | ||
| Fesa | Bango | ɗaya | 2-3. | 0.3-1 |
| Rufi | ɗaya | 2.5-3. | 0.5-1.5.5 | |
| Ɗan itace | Bango | ɗaya | 2-3. | 0.5-1.5.5 |
| Rufi | ɗaya | 2.5-3. | 1-1.5 | |
| Marufi | Bango | ɗaya | — | 1-1.5 |
| Rufi | ɗaya | — | 1-1.5 |
Filin rotband filastar an ɗauke shi sanannen mashahuri kuma ana amfani da shi sosai. Ana amfani dashi azaman tushe don kayan daban don kayan ado na ciki.
Kafin fara aiki, an rufe bango da bayani na farko da kuma gyara grid ɗin na ƙarfafa. Yanzu a kasuwa zaka iya samun mafita na tsantsan mafita na duniya na duniya, wanda aka bunkasa a kan tushen acrylmer copplymer. Irin waɗannan abubuwa suna ƙara haɓakar ƙaddarar da tushen tushe. Masu bushewa-bushewa suna da mashahuri, manufar wacce ita ce don aiwatar da itace da makamantansu.
Ka'idodin filastar itace
Plastering katako
Sphray shine sabon salon farawa wanda aka shafa a saman ganuwar, ba kyale tsallake ba. Manufarta ita ce sanya mafita da ingantaccen shafi, da kuma cika dukkan fanko da gibba.
Fasa bai bukaci daidaitawa ba, saboda wannan Layer zai isa ya cire ragi mai santa.
Lokacin da mafita ya fara taurare, zaku iya amfani da ku na biyu daga na farko. Zai zama tushen rubutaccen tushe na ganuwar a ƙarƙashin filastar da ƙirƙirar yawan da ake so.
Faɗin jakar ƙarshe (idan ya kunshi yumbu, lemun tsami, gypsum ko hade da waɗannan kayan) kada a yarda 5mm don mafita ta siminti. Idan farfajiya yana buƙatar, an ba da izinin siyar da poster ya shafi a cikin yadudduka biyu, yana ba kowannensu ya bushe.
Layer na gaba shine kusurwa. An fitar da shi ne kawai bayan kammala gyara mafita na baya. Kauri daga wannan shafi don sauƙin filasta shine 12mm, don inganta - 15 mm, da kuma ingancin inganci - 20mm.
Za'a iya amfani da wando na itace a hanyoyi daban-daban da dabaru:
- ta hanyar jefa;
- fesa;
- Fuskokin, da sauransu.
Don yin wannan, zaku iya amfani da kayan aiki cikakke da magunguna. Amma, galibi, ana amfani da ruwa ko grater don amfani da turmi na filasta.
Plattering shine hanya mafi sauƙi, wanda yake da kyau don aiki tare da yawancin masanin dens. Don amfani da hanyar da aka kawo karshen zai buƙaci wasu ilimi da gogewa, amma wannan zaɓi ne wanda ya fi dacewa kuma yana ba ku damar aiki tare da gaurayawan na rubutu daban-daban da daidaitawa.
Sirrin wannan tsari shine cewa mafita ana buƙatar amfani dashi akan bango tare da kaifi mahams na goga kadai, ba tare da amfani da duka hannun ba.
Dangarin Nakoda ba ya buƙatar aiwatarwa akan tsarin bayyananne. Ana iya yin shi duka biyun hagu da kuma akasin haka. Tsarin ya dogara da yanayin da ake aiwatar da aiki akan plastering.
Muhimmin matsayi na plastering yana aiki - matakin cakuda har sai bangon bango. Don kisan, yana iya zama dole don ɗaukar rabin layi, Falcon ko mulki.
Plastering bango na katako a cikin gidan
Tsarin ƙarshe da mafi ƙura mai ƙura shine a ƙone ƙasa da kuma grout. Idan kana buƙatar amfani da filastar kayan ado na ado, yin kwaikwayon takamaiman kayan rubutu, a wannan matakin ma yana da daraja samar da yanayin yanayin hoto na gaba.
Don grouting, an yi amfani da bango daga itace ko kumfa, kuma shugabanci na motsi na iya zama madauwari ko overclocked. Wannan hanya tana ba ku damar cire ƙananan lahani.
Daga bangaren fasaha, kan aiwatar da sanyaya sakamakon sakamakon ƙasa ba ta da bambance-bambance daga shtclot. Wannan hanya kuma tana aiki don ƙarfafa bango kuma ta sa ya fi.
Sakamakon duk aikin da aka yi akan plastering, kusurwar bango ya kamata kamar yadda zai yiwu da kaifi. Don sauƙaƙe wannan tsari, zaka iya amfani da ruwa mai triangular ko mai simiral. Wannan kayan aikin dole ne a gudanar a ko'ina cikin bangon, tare da ɗan matsin matsin kai daga ƙasa. Sannan tsari zai sake maimaita, amma tuni yana motsawa a kishiyar hanya. Idan buƙatar ya taso, ana iya maimaita irin waɗannan ayyukan.
Kamar yadda kake gani, filastar a kan bishiyar itace wani lokaci ne maimakon aiwatar da lokaci mai tsayi da na dogon lokaci wanda ke buƙatar aiwatar da aikin akan takamaiman tsarin.
Abin takaici, wannan zaɓi ba ne ya bambanta ta hanyar karkara, don haka ana lalata gine-ginen zamani, amma irin wannan babbar hanya ce don kare itacen daga mummunan tasirin da lalacewa.
Mataki na kan batun: Bone Mur Mur "taga": wani sabon abu ne na yau da kullun