A lokacin gyara, idan an datsa bangon da plasterboard, zai zama tambaya: "Yadda ake plastering bushe bushe?". A kallon farko, komai alama yana da sauki sosai, amma ba, saboda galibi ana kiranta bushe filastar.
Yumɓu
Wannan shine dalilin da ya sa sababbin masu zuwa suna da tambayoyi: "Shin zai yiwu a yi amfani da bushewa maimakon plaslering?", "Wane ne mafi kyawun filastar ko plasterboard?". Gaya mani daki-daki.
Har zuwa yau, maye gurbi bai kai ga abin da ya dace ba. Dayawa sun yi imani da cewa plastering plasterboard ba a yi amfani ba, wasu kuma suna jayayya cewa filastar filasta tana yiwuwa idan kun bi wasu ƙa'idodi:
- Kuna iya amfani da filastar kawai akan plaster-mai tsayayya da filasik;
- Zai fi kyau a yi amfani da mafita na ƙarshe;
- Daidai amfani da filastar thinesly, amma a cikin yadudduka da yawa;
Kadan Jama'ar da suka gabata ga wadanda suka sami masanan Masarawa suka zo - plastering plasterboard tare da kansu shine mafi mashahuri hanyar gama aiki.
Yaushe kuke buƙatar sayar da kayan bushe?
Plastering plastterboard
Plastering a kan plasterboard shine wani aiki mai rikitarwa saboda gaskiyar cewa zanen yana iya lalata karkashin tasirin danshi daga filastar da kanta, kuma watakila nutsuwa da ƙirar za su datsa shekaru da yawa .
Wadanne nau'ikan bushewa suna da kuma wanda ake amfani da su ana nuna su a cikin tebur.
| Iri-iri abu | Ikon aikace-aikace | Kayan launi | Alama (launi) |
| A sarari | Amfani da kayan ado na bango wanda baya ɗaukar babban kaya | M | Shuɗe |
| Danshi-rayayya | Aiwatar da ayyukan gama gidajen wanka, Gidan wanka da Kitchens | Kore | Shuɗe |
| Wuta mai tsauri | An yi amfani da shi don shirya ducts na iska da aikin sadarwa | M | M |
| Danshi-mai siffa | Yi amfani da shi don samun jurewar kashe gobara a ciki tare da babban zafi | Kore | M |
Sabili da haka, lokacin da ya zama darajan plastering bushewall:
- Idan ƙirar plasletboard yana da ƙananan rashin daidaituwa ko haƙoranci;
- Za ku iya ɗaukar abubuwan haɗin gwiwa;
- A lokacin da aka sanya shi a cikin filastar da filastar ta ado.
Duk da haka, idan kun cika fasaha na amfani da filastar da ke kan mayafin filastar, mummunan sakamako za'a iya guje wa.
Shirye-shiryen aiki
A matsayinmu na nuna, Munters sun fi son hadaddun kuma shigarwar mai hoto a matakin, saboda haka bayan gyara busassun bushewa, an sami ingantaccen farfajiya. Suna ƙoƙari tare da ƙananan farashin kuɗi don samun sakamako iri ɗaya da za'a iya samu yayin amfani da mafita na filastar filasta.
Don haka idan abu ɗaya za'a iya maye gurbinsu da wani, ya kamata su haɗu da su? Amsar a bayyane yake - ba shakka, yana yiwuwa idan kuna shirin amfani da filastar kayan ado na kayan ado na yau da kullun, ba bangon bangon waya da fenti ba.
A wannan yanayin, filasanta za su yi aiki a matsayin ɗakin kwana, wanda, banda, ba lallai ne su shirya musamman ba. Amma, ya fi kyau kada ku manta cewa wannan kayan zai iya raguwa daga danshi, don haka daidai ɗaukar zanen gado.
Plastering plastterboard sutturar
Mai zuwa shine abin da ya wajaba don tunani game da - farkon maganin zurfin shigar azzakari cikin sauri, saboda danshi ya ci ƙyallen bushewa cikin sauri.
Idan muka riga muka yi magana game da aiwatar da plastering, a ce duk zane-zane daga busassun da ka riga ka sa hannu. Amma, kafin motsi zuwa haɗin kai, ya zama dole don shirya ganuwar kamar yadda zai yiwu. Tabbas, zanen gado da kuma ingantaccen tsari, amma a lokacin shigarwa za ku sami wurin haɗin gwiwa na kayan da hutu daga sukurori, wanda zai buƙaci kawar.
Na gaba, la'akari da tsarin mataki-mataki-mataki na shiri tsari.
- Fiadde
Don haɓaka haɓakawa ga juna dukkanin yadudduka na ƙare, tare da taimakon wani mafita na ƙarshe zai zama dole don rufe duk yankin gini. Don irin wannan aikin, man shafawa mai fadi ko kumfa suna dacewa da su. Yi ƙoƙarin latsa firam daga mama kamar yadda zai yiwu, saboda ƙarin ƙarin danshi wanda aka sha a cikin ƙirar kuma bai haifar da nakasar sa ba.
- M gidajen abinci da seams
Plastering plastterboard
Tunda ana sayar da shi tuni a cikin gama tsari, zaku iya kwantar da gilashi a hankali don samun taro da rarraba shi a wurare kuma zurfafa daga sukurori.
- Gyara na sasanninta
A wuraren da ke cikin shinge na plastogboard a wani kusurwa, bai isa ya gyara lahani na putty daya ba. Zai fi kyau amfani da bayanan farko na musamman waɗanda suke da damar a saman Putty. A sakamakon irin wannan matsi, ragi na mafita zai buƙaci a sake zama ko'ina cikin bayanin martaba, yana rufe shi.
Yaya za a rufe plasterboard?
Plastering bushe bangon a cikin dakin
Bayan Putty, ya zama dole a sake amfani da shi tare da maganin farko. Ana yin wannan ne domin filastar ta shimfida a bango.
Idan baku canza shawarar ku ba a gefen ganuwar bangon da fuskar bangon waya, zaku iya duba kusa da gaurawar gama. Wajibi ne a ce babu zaɓuɓɓuka da yawa a gabanka:
- Memfin da yawa-sikelin cakuda;
- Dutse bushe water na ma'adinai.
Idan zaɓin ku ya faɗi don zaɓi na farko, za a buƙaci culma mai sanyin ƙarfe da baki mai laushi, kuma don gaurayawan ruwa - gunnan ruwa - wani bindiga mai ruwa - bindiga mai ruwa.
Idan don aikin da zaku yi amfani da dunƙule dutse, komai zai fi sauƙi sauƙaƙa. Don farawa, zaku buƙaci amfani da mafita mai kyau a kan zanen filayen plasta, sannan kuma tare da taimakon ɗakunan iska, fesa dunƙule.
Don haka, lokacin da aka gama shirya shirye-shiryen, zaku iya ci gaba zuwa mataki na ƙarshe - shingen bango. Wannan na bukatar spatula rectangular, roller tare da zane da Celma (wani lokacin yana iya zama dole don ƙarfe).
Idan kuna buƙatar rufe filasik da bango da rufi, kuna buƙatar farawa da rufin, amma kawai sai a canza zuwa sarrafa saman. Tunda bai dace da yin aiki ba a kan rufi, ɗaukar rumber tare da karin haske don rike, wanda zai sauƙaƙe aiwatar da ayyukan "babban aiki".
Don amfani da farkon smears, kuna buƙatar buga ƙaramin adadin mafita akan sel kuma danna shi zuwa bango a mangsi. Allastering plasterboard ne mafi kyau yin nasa, kuma ba amfani da fesa, yayin da motsin ka dole ne ya zama santsi, da kuma sanya Layer na bakin ciki. Idan taro ya sa a kan farfajiya ba ya kamata sosai ba, ana iya sake sake sarrafawa ta hanyar culmm don sanyin maganin. Za'a iya amfani da bugun jini na gaba zuwa wanda ya gabata, ba tare da yin wani tsaka-tsaki ba.
Lokacin da yanki na farko ya bushe da kyau, zaku iya fara tsabta - na biyu. A gareshi, duk wannan ya san muku Quelma da mafi siyeji da za ku yi amfani da tagulla, mafi duhu farfajiya ta zama. Tare, Kelma na iya amfani da roller tare da zane, wanda zai taimaka cikin ƙirƙirar ba kawai suttura bane, har ma da embossed.
Akwai wani dabara wanda wanda aka yi amfani da filastar sintiri kawai tare da taimakon roller. A wannan yanayin, ya zama dole don hawa nauyin aiki na rumber a cikin cakuda, wanda ke zubowa cikin karamin akwati, sannan ka rufe ƙirar tare da motsi mai kyau. Aiki tare da roller, ba za ku buƙaci santsi a farfajiya tare da mai laushi ba, kamar yadda kuke buƙatar yin lokacin aiki tare da colelma, ƙarewa zai zama mai inganci da ƙarshe.
Amma, lura cewa frescople, filastar tana buƙatar amfani da filastar kawai ta Kelma.
Gyara bushewa a ƙarƙashin zanen
Plastering plasterboun bango
Lokacin shigar da filasan filasji ya cika, zaku iya zuwa mataki na gaba na kammalawa - zanen.
Saboda santsi da santsi surface, zanen bushewa shine mafi sauki da tsari tsari.
Amma, ƙwarewar masters ba da shawara don mafi kyawun zane don yin wasu takamaiman aiki, kuma yana da kyau ka cika filasikai kawai bayan plastering.
Don shirya busasshen bushewa, aikin da yawa ba za a buƙace su ba, amma wannan ba huhun huhu bane. Dole ne a yi amfani da layi ɗaya tare da babban spatula, bayan wanda yake da kyau sayayya sosai don cikakken yanayin. Na gaba, ya cancanci rufe farfajiya tare da haɗuwa da mafita da kuma rike da ƙirar sandar sandar sandar.
Sai kawai lokacin da aka kammala duk waɗannan ayyukan, zaku iya fara zanen bango ta kowane kayan haɗin PVA.
Yi hankali lokacin da plastering saman farfajiya a ƙarƙashin zanen, saboda duk fenti da fenti fenti ba zai ɓoye ba, amma kawai ƙara yawan misalin ɗakunan ajiya.
Me kuke buƙatar sani game da filastar filastik?
Plastering akan plasterboard
Da farko dai, ya zama dole don jaddada game da gaskiyar cewa ya kamata ya zama ya kamata ya zama ya kamata ya shiga cikin gypsum. A matsayinka na mai mulkin, ana sayar da irin waɗannan jaka na cakuda a cikin kunshin cyllopper. Magani ya fi dacewa ga ƙananan rabo, kamar yadda talakawa ta gypsum ke halayyar su ta hanyar haddi.
A kan filastar plasterboard na iya zama glued. Amma, idan ba ku da isasshen ƙwarewa a cikin wannan al'amari, zai fi kyau ci gaba kuma yana gyara zanen gado tare da kusoshi ko sukurori. Ana iya cinye su cikin bangon kanta da kuma a cikin firam.
Mene ne har yanzu mafi kyau: filastar ko plasterboard - don magance ku. Zamu iya faɗi abu ɗaya - an ba da izinin bushewa don amfani maimakon filasta don daidaita farfajiya. Irin wannan aikin shigarwa ana yi shi da sauri, kuma ba wuya sosai kamar ciyayya. An hada zanen filayen plasterboard da filastar filastar da aka hade sosai, kuma zai iya hada junanmu.
Babban abin da ake buƙata shine a bi fasahar amfani da kuma ta cika umarnin don amfani.
Mataki na kan batun: kayan daki-daki tare da naku: m gado