Yadda za a dumu bangon da kumfa a waje - jagorar mataki-mataki-mataki

Shirya Sani a lokacin rani ... wannan karin magana, ta yaya ba zai iya yin tunani mafi kyau ba

Gaskiyar cewa ba ta da latti don yin tunani game da dumamar gidan ba latti

da wuri.

Kamar yadda shaidar bita, tsakanin nau'ikan rufi, kamar

Gidaje masu zaman kansu, gida da gida da kuma manyan gidaje (gidaje),

Layafa waje rufi. Kuma daga cikin kayan da aka fi so - fi so - kumfa.

Muna ba da shawara don gano abin da ake samu saboda babban ƙarfin da ke cikin rufin bangon bango a waje.

Abvantbuwan amfãni na rufin waje

• Na farko da mafi mahimmanci, gudun hijira na mukamin maki sama da bango

  (duba hoto). Menene kyau? Gaskiyar cewa gidan koyaushe zai sami bango bushe.

  Matsalar da daskarewa zata ɓace da kanta. Bugu da kari, danshi, ba tara kudi

  A bangon, ba zai hallaka shi ba. Wannan zai ba da damar ƙirar ƙwararrakin "Tsoho"

  Oda yana da hankali.

• Na biyu, bango zai tara zafi. Don haka bayan

  gidajen iska a cikin hunturu, zai dawo da sauri

  zazzabi. Bayan haka, ganuwar za ta ba da wani ɓangare na mai da aka tara zuwa ɗakin, kuma

  Ba a kan titi ba.

• Na uku, ana iya aiwatar da aiki a kowane lokaci. Rike

  ba ya daɗe da kyautatawa na ciki da tsada, da kuma tsari

  Ƙarin iska.

Abbuwan amfãni na kumfa

• mafi karancin darajar aikin hancin zafi a cikin sanannunrufin zamani;
• Low kayan abu;
• Karamin kudin kwastomomi na jan hankalin mutane;
• damar yin dumama da hannuwansu;
• Saukewa da sauƙi na kumfa da ƙari.

Fasaha na rufi na bango ta kumfa abu ne mai sauki. Amma

Yi aiki tare da babban inganci, zaku iya sanin wasu abubuwa kawai da fasali.

Yi la'akari da mataki-mataki, yadda za a rufe bango a waje da kumfa,

Kuma waɗanne irin rikice-rikice na iya haɗuwa da kowane matakai.

Umarnin don rufin bango ta kumfa a waje

1 Matsayi - Zabin abu

Warming na waje bango tare da kumfa - wannan na'ura ce

Tsarin dannoni. Irin wannan kek din yana ba da rufi ƙarin

Kaddarorin, a cikin nau'i na ƙarfi da ado. Kuma yana ba ku damar kare kayan

daga tasirin halayyar muhalli.

Don rufin waje, ya fi kyau zaɓi kumfa c-25.

Nuance: Irin wannan zabi ya zama saboda dalilai biyu - karkatacciya da

zafi insulating kaddarorin. Tabbas, abu tare da yawa 15 zai fi kyau

Riƙe zafi. Tunda yana da ƙarin iska. Amma, kumfa na PSB

mafi rauni.

Rashin daidaituwa na kumfa na psb-s-15

(Lokacin da aka yi amfani da shi a cikin rufin waje)

• Shi crumble sosai lokacin aiki;
• da wuya a yanka sosai;
• Takardar kusan ba zai yiwu a yi amfani da grater ba;
• Filastar qarya qarya;
• Platonred saman bango mai sauƙin sayarwa.

Kauri daga takardar kumfa ya dogara da:

1. sakamako sakamako;
2. Yankin (zazzabi mai lissafin a cikin watan sanyi, karfi

   da kuma hanyar iska);

3. Kayan daga abin da aka yi bango.

Nuance: Wall Work mai sanyin sanyi a waje na filastik

Yana sanya ƙarin buƙatu ga daidaito na ƙirar ƙirar ƙwararru. Sabo da maras kauri

Layer zai haifar da gaskiyar cewa moton balle ba zai iya canzawa zuwa kumfa ba, kuma

Zai kasance a bango. To, danshi wanda za a tattara a cikin tubalin zai karu

Saurin halakarwa. Kuma idan Layer na kumfa zai kasance mai bakin ciki, to, a cikin hunturu

Danshi zai juya cikin kankara. A sakamakon haka, ana kafa kumfa a bango, kuma takardar ce kawai

Kogin.

Mataki na kan batun: Allon ado ganuwar da plasterboard

Tip: Idan hoton da ake buƙata shine 100 mm, ya fi kyau saya biyu

50 mm. Da kuma hawa harbe. Don haka kawar da gadoji a wurare

Junction na zanen gado.

Kayan don rufin waje bango na kumfa

• zanen gado (faranti) na kumfa;
• Fara bayanin martaba;
• giyar manne;
• Dowels tare da babban hat (fungi, laima, laima).

Tip: Idan kayi amfani da polyfoam tare da kauri na 50 mm, to, don

Tsarin kankare na tsawon Dowel yakamata ya zama aƙalla 90 mm don bulo -

ba kasa da 120 mm. Dowel dole ne ya shiga bango aƙalla 50 mm.

• Kusurwa mai cike da shi tare da ƙarfafa grid;
• grid na polymer;
• bayanin martaba don gangara;
• filastar;
• Zane don gudanarwa aiki.

2 mataki - Shiryawa daga farfajiya

Ana bincika bangon don ƙoshi.

Ilimin Halittu - Moss, naman gwari). Sassan masu hawa zasu kasance a nan gaba

Mafaka ta kumfa, kuma waɗanda ba a tsallake su da kyau ba ana rushe su. Idan daga bango

Yayi daidai (peeled) tsohon Sugcoo, yana buƙatar cire shi.

Wasu lokuta, ana samun Moss a jikin bango - yana buƙatar scrade shi. An kuma cire fenti idan

Ana samun wannan. Da kuma kowane yanki da ke da sifili vapor permability.

Idan akwai fasa mai zurfi a bango suna buƙatar saka. Don \ domin

Wannan yana buƙatar faɗaɗa. Sakamakon v-mai siffa tashar da aka tsara. Sa'an nan

Sami. Yashi-ciminti turmi, manne da hatimin

ko kumfa gini.

Fasa a bangon

Fasaha ta Burtaniya a bangon

Shirya farfajiya na bango ƙasa ne.

Primer Tsakanin Primer Primerer Amfani da Magani Na Universal

Zurfin shigar azzakari cikin sauri. Zai kare bango daga naman gwari da sauran ilimin halitta

Aiki, kazalika da kara m na farfajiya.

Tukwici: Za a iya bincika madaidaicin dacewa kamar haka.

hanya. Kumfa tare da girman 10x10x10 mm yana glued a kan mafita mai ma'ana

zuwa bango. Bayan kwana uku, ya karye. Idan toshewar ta fashe gaba daya, yana nufin hakan

Garun bai dace ba kuma yana buƙatar ƙarin ɓarke. Idan toshe ya karye, amma

Yana riƙe, zaku iya ci gaba zuwa aiki.

Shin zai yiwu a rufe ganuwar bangon gidan katako?

Ruwan bango mai zafi a waje na filastik ya fi kyau ba

Ku ciyar. Wannan ya faru ne saboda gaskiyar cewa itace tana da zafi na halitta. Don \ domin

cewa tana da damar ba da danshi ga yanayin waje

Rufi tare da tsari mai kyau. Manufa a wannan yanayin zai zama

ma'adinai na ma'adinai.

Daga ra'ayi mai amfani, rufin bango na katako

Polyfoam mai yiwuwa ne. Da aka bayar idan babu mummunan yanki a cikin itacen. Cikin

In ba haka ba, kafin a ci gaba da aiki, kuna buƙatar rufe su na halitta

rufi - gansakuka, ko na musamman na acrylant seadant

Rufe har ma da mafi karancin lahani da kuma irin hutawa. Haka kuma,

An shirya shigarwa na kumfa kawai tare da aikace-aikacen tsarin.

Warming na bangon katako a waje da kumfa - don kuma a kan

3 Matsayi - Alamar

A wannan yanayin, aikin gona baya nufin cewa kuna buƙatar amfani

Zane a bangon gaba ɗaya. Irin wannan grid zai rikice, saboda ganyar ƙarfe

Polyfoam yana da karkatar da izini na 10 mm. A cikin 1 mp

Amma, auna a kwance kuma a tsaye shine kawai ya zama dole. sabo da

cewa an samo kusurwoyin da kullun ba koyaushe ba ne, saboda Bango na iya

Ƙananan karkacewa.

Mataki na 4 - shigarwa na kumfa a bango da facade

Majalisar Newserners - fara aiki daga bangon da

An lura da mafi karancin, zai zama ƙasa horo horo.

Na'urar kumfa akan bango ta fara hawa

Fara bayanin martaba. Girman shi daidai yake da kauri daga cikin takardar kumfa. Wani lokacin ga waɗannan

Manufofin UW-50 ko 100 ana amfani da bayanin martaba. Waɗannan sune mafi mashahuri don rufi

Da girma na zanen gado.

Nuance: Mai farawa na musamman (SARCulular)

Yi amfani da kyau saboda Yana da shago wanda ya ba da cikakkun kuri'a

dogara da bayanin martaba, kuma a lokaci guda yana ba da motsi saboda

fadada fadada.

Mataki na a kan taken: Bugin Majalisar Bikin Bikin: Bukatar da sauri

Bayanan martaba na farawa yana hawa akan alƙawarin da aka yi amfani da shi.

Amfani da shi yana ba ku damar cikakken layin farko na zanen gado. Ban da

A cikin mutane, akwai ra'ayi cewa bayanin ƙarfe zai ba da damar

Kare takardar daga rodents.

Don matakin matakin fadada na karfe, tsakanin

Bayanan nan masu makwabta suna buƙatar barin rata, kusan 5 mm.

Adadin bayanin martaba a ƙarƙashin rufin kumfa

Ana nuna tsarin kusurwa a cikin hoto

Na'urar kusurwa a ƙarƙashin rufi na kumfa

Hanyoyi don haɓaka kumfa

Fasahar shigarwa na kumfa yana da yawa

gyare-gyare. Don kulle takardar a bango zaka iya zabar daya daga cikin uku

Zaɓuɓɓuka:

• Aiwatar da manne zuwa gefen takardar kuma sanya kayan zane da yawa

  Ganye murabba'i. Wannan hanyar ta dace da bango mara banƙyama;

Hanyar ɗaukar nauyin kumfa a jikin bango mara kyau

• Aiwatar da manne tare da spatula toothed a cikin ganye. Zabi don

  in mun gwada da bango mai laushi;

Hanyar da sauri na foam a bango mai lebur

• Yi amfani da manne na musamman daga silinda. Irin wannan manne ne

  GASKIYA GAME. A lokaci guda, yana da sauƙin aiki tare da shi fiye da tare da m

  bayani. Ari da, ba ya buƙatar a durƙusa, yana da tabbaci amintaccen takardar zuwa bango.

Da sauri kumfa don manne daga balanji

Na gaba, farantin kayan da aka haɗe daga saman kusurwar

amfani da yin amfani.

Layi na biyu na zanen gado an sanya shi tare da yin hijira, kamar yadda aka nuna

a kasa. Wannan tsarin yana sa shigarwa ya fi aminci kuma yana rage yiwuwar bayyanar.

Fashe.

Makirci na hanawa kumfa tare da hijira

Don haka cikin tsarin duk layuka suna tsayawa har zuwa ƙarshe.

Tukwici: Domin manne don clab don cantab gaba ɗaya, bango,

Kada ta kasance ta kumfa ta kumfa 3-4. Idan kun kasance rufi

Polyfoam tare da nasa hannu, sannan a ƙarshen aikin, shafin farko lokaci yawanci lokaci

Tashi lokacin da ya dace.

Ya kamata a biya kulawa ta musamman da datsa, saboda shi

Hakanan tushen asarar zafi. Aiwatar da gama a cikin hoto.

Na'urar Na'ura Lokacin Insulating Foam

Tagora tide bayan shigar da kumfa za a maye gurbinsa.

Domin kasancewa a wuraren rufin da rufi zuwa firam

Karfe taga filastik ko ƙofar babu asarar zafi, kuna buƙatar shigar

Profile na Bayyana. Saboda gaskiyar cewa bayanin yana da m

Ana sauƙaƙe tsiri a cikin firam ɗin firam. Tsarin shigarwa a cikin hoto.

Shigar da bayanin martabar taga lokacinda ke rufe kumfa

Shigarwa na bayanin ya bada tabbacin babu rashin halaye da bayyanar da aka gama.

Kar a ɗauka cewa bayan rufin gidan kumfa

Juya cikin wannan akwatin. Variage Sheet Kauri ko kwanciya da

Mai tsaro kulle su cikin yadudduka da yawa, zaku iya ƙirƙirar kowane yanki bango.

5 Matsayi - Additionalarin ƙarin ɗaukar filastik na filastik don bango

Dowels laima (fungi) don haɓaka kumfa na dower na musamman na ƙwallon filastik (naman gwari) don tsawan kumfa na musamman, da kuma dogaro da shi "cikin takarda, da kuma dogaro da shi" cikin takarda, da kuma dogara da shi "cikin takarda, da kuma dogara da shi" cikin takarda, da kuma dogara da shi "cikin takarda, da kuma dogara da shi" cikin takarda, da kuma dogaro da gyara shi.

Hawan "laima" na iya zama cikin hanyoyi guda biyu, kamar yadda aka nuna a cikin adadi.

Zaɓin farko ya dace da wuraren da aka yi. Idan tsakanin

Sheets suna da babban gibin, to kuna buƙatar amfani da zaɓi na biyu.

Nuan: zaɓi na farko zai ceci downel, amma

yana ɗaukar lokaci don dacewa da zanen gado a girma.

Wani ajali ambatacce na downel dow, ka tabbata cewa yana ɗan sake komawa cikin takardar.

Yana da mahimmanci a lura da hakan a cikin fasalin al'ada na laima

An saka shi kamar yadda aka nuna a hoto. Koyaya, tunda irin wannan shigarwa

Lokaci mai yawa, da filastik dowel ba ya haifar da gadoji, wannan mulkin

Har ma da gogaggen magini da suke sakaci.

Hanyar da sauri kumfa tare da "nutsar da" Hats Dowel-Umbella

Gibba kafa a kan junkutattun zanen gado biyu kusa

kumfa. A cikin rata na nisa daga sama da 20 mm, ramin yana rufe da crunch na kumfa.

Don mafi aminci, gefen baya na trimming yana sanyaya tare da manne ko kumfa.

Mataki na kan batun: tsire-tsire na ado da furanni na lambun inuwa mai duhu: yadda ake yin lambun fure a cikin inuwa

Seeling bawo a wurin kumfa

Bayan hatimin duk fasa, sun fara trimming protruding

Sassan takardar da ake samu a cikin sasanninta.

Na gaba, farfajiya na ganuwar niƙa don grater don kumfa.

Coam nika grater

Tukwici: Idan bango ya yi ado da kumfa, ya miƙe

Makonni 2 ba tare da gama ba, zai rage gaba daya, saboda Ultraviolet riga

lalacewar farfajiya na rufi.

Mataki na 6 - gama sasanta da gangara ta kumfa

Cibiyar da aka fasalta tare da ƙarfafa ayyukan cibiyar sadarwa a gida ko gangara suna buƙatar ƙarin kariya daga girgizar. Bugu da kari, tabbatar da cewa Grid da ake buƙata yana da wuya a nan. Haka ne, kuma yana da wuya a yanka coam daidai. Saboda haka, domin su an ba su

Na musamman kusurwa tare da karfafa grid.

An haɗe shi da manne kuma a ɗaure shi da spatula na musamman akan waje ko kusurwar ciki na gidan, ko dan kadan.

Tsarin shigar da kumfa faranti a kan sassan an nuna a hoto. A cikin gangara kamar yadda tuni

Cibiyar ta musamman ta fada.

Tsarin shigar da kumfa akan sasanninta da gangara

A wannan matakin, gidan yana shirye don kara gamawa.

Mataki na 7 - Farmontin filastik gaban filastar

Rufin waje na bangon bango yana ba ku damar kare gidan

Daga asarar zafi. Kuma abin da zai kula da kariya daga faɗin da kansa? Gama

(facade, kayan ado) filastar, saiti, rufewa ko wani

Gaban kayan. A cikin misalinmu, filastar ce.

Asalinta shine Gridirƙirar Grid don

Polyfoam da sel 3x3, 4x4, 5x5. Dandalin raga yana cikin

140-160 g / m.kv. Alkawarin sake karfafa grid - tabbatar da amincin

Bangon bango da hana fasa.

Tukwici: Kada a yaudare shi a low cost na Grid - a cikin wannan

harka, ceton bai dace ba. Grid mai inganci yana rufe da mafita na musamman,

wanda ke kiyaye shi daga sakamakon alkalis da acid, waɗanda suke ƙunshe a cikin m

mafita. Grid-ingancin grid "ya narke" a manne.

Yadda za a Dutsen Grid akan kumfa?

Ɗaure raga a kan kumfa 1 yana gyara grid don manne. Wanda yake firgita kumfa. Ana amfani da alamar lamba ta musamman akan grid. Red Strip yana nuna yawan zane-zane. Wannan ya kusan 100 mm.

Idan babu lakabin, yi ƙoƙarin yin tsayayya da ƙaddamar da santsi a duk tsawon tsiri.

Rage raga a kan kumfa-2-ninka raga na: tsiri tsiri na doron da ake so shine yanke, da 250-200 mm. Ana amfani da manne a saman bango. Yankin alamar glue band kamar 100x10 mm. Grid ya yi tsage da matsi. M

Da yake magana, grid dole ne ya nutsar da shi a manne.

Trimming ba dole ba ne kafa: kalli grid ba zai tafi jituwa ba. Daidaita spatula. Amma, kada overdo shi, in ba haka ba za ku rushe duka tsiri. A kasan ragin grid ɗin an yanke shi.

Don haka painty rufe grid akan dukkanin bangon, ta

Kuna buƙatar amfani da yadudduka biyu. Daya lokacin farin ciki Layer zai rufe microcracks. Cuta

Ba zai kawo ba, amma an tabbatar da lahani za a lura dashi. Yi la'akari da Layer na baya

Dole ne ya bushe gaba daya.

Tukwici: Kada kuyi aiki tare da Putty a cikin yanayin iska.

In ba haka ba, Layer zai bushe da sauri, wanda kuma zai haifar da bayyanar microcracks.

8 Matsayi - Primer da Tsakiyar Gama

Kamar yadda ya biyo baya daga taken mataki, manyan ayyukan da ke da alaƙa a nan

Tare da farko na farfajiya na bango. Sannan kuma ci gaba zuwa amfani da gamawa

Putty da / ko tabo.

Karin bayanin gani game da yadda ake yin rufin

Foam na waje na waje ya ƙunshi umarnin bidiyo

Watsi da dokokin shigarwa na kumfa lokacin aiwatarwa

A waje rufi na bango na iya haifar da sakamakon rashin tausayi.

Sakamakon shigarwa na kafaffun kafaffun kaya

Ƙarshe

Muna fatan cewa wannan umarnin zai ba ku damar rufe

Bangon waje na kumfa ya fi dacewa kuma ba tare da matsaloli ba.