Yadda za a yi glazing da veranda polycarbonate

A cikin gidajen ƙasa da a cikin Dachhas, ana amfani da veranda a matsayin wurin hutawa da liyafar. Yana kusa da gidan, don haka sau da yawa yana yin aikin ɗakin cin abinci, inda yake da daɗi ku ci, yana yaba wa kallo daga taga.

Excelly ƙara glazing da veranye polycarbonate saboda yawancin fa'idodinta akan wasu kayan. A cikin wannan labarin, la'akari da matakan yin aiki mai kyau akan glazing da hannuwanku.

Mataki na shirya

Don glazing, duka monolithic da salula polycarbonate zai dace

Don glazing, veranarda ta dace da monolithic biyu da salula polycarbonate. Abubuwan da aka haɗe ne da umarnin da ake buƙatar yin nazari kafin fara aikin shigarwa. Mun zabi kauri dangane da manufar aiki na dakin (akwai mai wahala, ko ana amfani dashi a cikin hunturu da yankin sa.

Kuna iya aiwatar da glazing biyu a matakin aikin gini da lokacin aiki.

A bu mai kyau a tuki polycarbonate akan firam karfe

Ana yin ayyukan da sauri saboda gaskiyar cewa kayan ana iya sarrafa shi da sauƙi.

Idan polycarbonate shine glazed a cikin Veranda na Gina a matakin aikin, kafin bushewa tushe, ya kamata a gina tushen ƙarfe a gindi.

Don shigarwa kuna buƙatar:

• Zanen salula na polarbultate;
• alamun aluminum, bayanan martaba na ƙarshe;
• masu karfe masu kunne;
• Jelaant, hawa kumfa;
• Rashin son kai, anga, thermashaba;
• Bulgaria, rawar soja, siketdriver;
• Matakin gini, COUTTE;
• alama.

Tare da glazing polycarbonate akan kafuwar babu wani abu mai mahimmanci, a cikin wannan dangane, ya isa ya zuba kaset ko tari.

Glazing veranda tare da nasu hannayensu

Ka yi la'akari da yadda ake yin glazing da verzing da veranda a gidan polycarbonate tare da hannuwanku.

Matakan bango Glazing:

1. Gyara a kan kafuwar tsuntsu, ana iya yin sa na ɗakunan, sasanninta, bututun ƙarfe.
2. A cikin firam, mun hau kan katako na katako tare da mataki na 600-800 mm, don kerarsa, muna amfani da bararrensa 50-100 mm bar a sashin giciye.
3. An rufe babba na sama tare da ribbon aluminum, a ƙasa a nesa na 10-15 mm daga firam din magudanar ruwa don cire ramuka.
4. Don crate tsananin cikin sharuddan zanen polycarbonate tare da ramuka pre-sun girka a karkashin dunƙulewar kai da mataki na 400-500 mm.
5. Diamita na bude dole ne ya zama 1.5 mm fiye da kauri daga dunƙule. Muna sutturar thermoshair a kan dunƙulewar kai, za su hana samuwar gadar sanyi.
6. Dukkanin hadin gwiwar sun cika sealant.

Buɗe sassan sassan suna buƙatar rufe da kintinkiri na aluminum ko bayanan martaba na musamman. An cire fim mai kariya bayan ƙarshen aikin, yana kare kayan daga lalacewa na inji.

Rufin hawa

Kafin fara aiki, kuna buƙatar yin zane da lissafin rufin rufin. Idan an ƙera rufin a cikin hanyar baka, yana da kyawawa kar ku yi lanƙwasa radius na fiye da digiri 6.

Mataki na a kan batun: mafi kyawun rufe fuskar bangon waya don kada su ƙazantu

Hanya mafi sauki don yin rufin guda ɗaya, haɗe ɗaya ƙarshen zuwa bango na gidan.

Matakan aiki:

• Dutsen Rafters na katako a ƙarƙashin kusurwar da ake so na karkata;
• Mun kafa wani abin hawa daga mashaya na katako tare da mataki daidai yake da rabin nisa na takardar;
• Rage ramuka na fastens, saka polycarbonate, gyara akan slick schos tare da thermohami, mafi daraja mataki ya zama 300-400 mm;
• Mun ƙididdige shigarwa na crate saboda hadewar zanen gado fada a mashaya, kuma ba a ƙarƙashin fanko.

Polycarbonate na iya zama glazed ganuwar veranda ko kuma dutsen rufin daga kowane nau'i. Yankin da aka yi da polycarbonate polycarbonate zai jituwa cikin ƙirar gidan ƙasar. Lokacin da veraganda yake glazed, da keɓaɓɓen zanen gado tare da matte da kofe mai launi za a iya haɗe.

Shawarwarin Polycarbonate Glazing

Sanya polycarbonate polarbulonsate saboda tashoshin iska suna tsaye a tsaye

Don hawa daidai, kuna buƙatar bin ka'idodi masu zuwa:

1. Air Canaal a cikin salon salula ya kamata a kasance a cikin shugabanci na tsaye.
2. A lokacin da aiki tare da arched tsarin ginanniyar ginannun Gangi, kayan cikin shugabanci na kayan iska.
3. Don yankan zanen gado suna amfani da wuka na gina, madauwari saw ko jigsaw.
4. Ramuka na Thermosau dole ne ya kasance 10-15 mm mafi girma a cikin mafitar diamita zuwa rama ga fadada ganye a karkashin aikin zafi.
5. An cire fim mai kariya nan da nan bayan ƙarshen aikin gini, idan ba ku cire shi a kan lokaci ba, to, a ƙarƙashin aikin hasken rana, zai yi daidai da sandunansu, zai zama da wuya a cire shi. Don cikakkun bayanai kan yadda za a rufe veranda polycarbonate, duba wannan bidiyon:

Veranda ya yi da polycarbonate yayi kyau, yana kare tasirin ATMOSPheric, yana da alamomin healms kuma suna da ingantaccen cikas don shiga masu kutse.