An zabi hasken wuta yadda yakamata yana yin kyakkyawan ciki har ma mafi ban sha'awa. Hakanan, haske yana shafar dacewa ga mutum: bai kamata ya zama mai haske sosai kuma ba maɗaukaki ba, ku tafi wuraren da ya dace (idan ya zo ga gida).
Tushen haske ba kawai kwan fitila a cikin chandelier ko baki ba. Kari ko cikakken sauyawa na "Standard" LIS -E kaset (taken kaset, dattara). Tare da taimakonsu, zaku iya ƙirƙirar ɗamara mai ban sha'awa ko dacewa don haskaka makirci wanda ba za a iya shigar da fitila ba. Haɗa kintinkiri yana da kanka da gaske: aikin yana da sauƙi.
Fa'idodi da rashin amfani da haƙarƙarin
Babban fa'idodi:- Lowerarancin yawan iko (leds cinye sau 5-6 ƙasa da fitilun wutar lantarki fiye da fitilun da ke da iko daidai);
- Shigarwa mai sauri (kaset yana da daidaitaccen abu a gefen baya);
- da ikon yanka tef zuwa tsawon da ake so;
- Ikon riƙe tef akan kowane hanya;
- Tsarin launi mai yawa (hasken rana ba kawai launin rawaya bane ko farin inuwa, amma kuma wani launi daban-daban ana iya haɗa shi a kan tef na 1, wanda za'a iya juya daban-daban).
Babban Minus shine babban farashi mai tsada. Baya ga tef ɗin da aka kanta, wanda ke kashe kusan 35-45 rubles a kowace 1 m (tare da karfin kusan 5 wt) kuna buƙatar siyan wani mai sarrafawa, wutar lantarki da mai haɗawa.
Don yin hasken 1 wuri, tare da fannin 12-15 m² ta hanyar ribbon 1700-2000 kuma ya zama mafi ƙarancin (don haɗin haɗin, BP, mai sarrafawa da kuma kusan mita 12-15 . Babban fitilar zai kashe kimanin robles 600.
Baya ga farashin, debe wani wahalar maye gurbin 1 wanda aka bari daban. Idan an canza 1 LED don canza duk tef.
Mafi yawan wuraren cin nasara
Zaɓin shafin shigarwa ya dogara da aikin:
- Ana amfani da tef don kayan haske na kayan ado (na zaɓi, sai dai don babban tushen hasken). A wannan yanayin, an ɗora daka a kusa da abin da ake so (misali - sama da hoton, ko kewaye da gundumar da aka yi, ko a ƙarƙashin ƙirar dafa abinci na ciki). Haske ba lallai ba ne mafi kyawun haske, directed zuwa sashin da ake so ko farfajiya.
- Ana amfani da tef a matsayin babban wutar lantarki. A wannan yanayin, daddare yana haɗe ne daga sama - gefen gefen bango ko rufin, a cewar wani shirin. Ya kamata LEDs ya zama mai ƙarfi don tabbatar da hasken gaba ɗaya. Ana karkatar da hasken daga bango, "A ciki" dakin don diskipate.
Mataki na a kan batun: Yadda za a sanya porcastes + hoto a cikin ciki
Wuraren don shigar da kintinkiri idan ana amfani dashi azaman babban tushen haske:
- Domin rufin wuri.
- A cikin niche a kan dakatarwar dakatar (ana iya yin shi a matakin shigarwa na rufi, ko kuma idan nicis a cikin rufin ya kasance).
- A kusa da kewaye - a saman ganuwar ko a rufin.
Lokacin shigar da kayan kitchen
A cikin dafa abinci, ana amfani da kasetin LED kaset ba kawai azaman hasken rufewa ba - an kuma sanya su a kan kawunansu.Shagon shigarwa:
- Gaban ko baya na kasan madubar da kaho (tare da tace) - idan fitilun hod suna da rauni;
- A karkashin kabad da aka saka kabe - a kusurwa (tsakanin kabad da bango) ko a kasan kabad da gefen (kara daga bangon);
- A kasan allunan (a wannan yanayin, hasken rana zai zama kawai don kyakkyawa);
- A cikin akwatunan resporable, bude shelves, kabad - don haskaka sarari.
Don irin waɗannan wurare, ana amfani da tef ɗin sau da yawa ba a cikin bayanin martaba, sai dai kawai manne zuwa farfajiya, ba tare da sutura ba.
Lokacin shigar da shi a cikin wani niche ko tufafi
Ribbon na iya haskaka hand na majalisar ko sararin ciki na plastogboard. Mafi sau da yawa, kawai suna glued zuwa farfajiya, ba tare da bayanan martaba ba.
Wuraren shigarwa:
- A cikin zurfin da ke cikin niche ko majalisar minista, idan tayi zurfi (mai yawa sarari a ciki) kuma yana tsaye a cikin wurin da aka haskaka talauci (farfajiya, ko kuma nesa da taga);
- ciki (kabad, kirji, allunan gado);
- A cikin plasterboborboborbes don zane-zane, bangare;
- A cikin kabad a cikin wanka.
Hanyoyi don shigar da hasken rana
Za a iya hawa Durara cikin hanyoyi 3:- A cikin akwatin. The bushe bushe akwati ne tare da boye ƙasa, wanda aka sanya a cikin kintinkiri (ba za a gani daga dakin). Minus shine cewa an cire akwatin kawai a kan matakin gyaran dakin, kuma dole ne ya yi shi cikin ribbon kwanciya hanya.
- A bayanin martaba na musamman (filastik ko aluminum). Zabin yana da sauki kuma mai arha, ana iya amfani dashi a kowane lokaci (koda ba a shirya gyara ba). An ɗaure zuwa kowane farfajiya (tayal, fuskar bangon waya, filasik, bulo, itace da makamancin haka.
- A kan rufin plast. A cikin wannan yanayin ba a hawan a kan rufi, amma a ƙasa ta 5-10 cm daga shi. A cikin wannan rata kuma tef ɗin an shigar dashi. Plinth yana da tashi a cikin rufin. Tsakanin sashin da bango, ana samun cirewa a wanne Dadinci yayi tsinkaye don haka ba bayyane daga ƙasa.
Mataki na kan batun taken: Yankin nishadi a cikin kasar
Irin kaset na LED
Kungiyar LED kaset ya bambanta da:
- Yawan launuka . Akwai monochromor ko multicolor (rgb ribbons).
- Nau'in haske . Akwai halaye masu tsauri (Haske, haske, launi - na iya bambanta ta mai sarrafawa), lebur (tare da kusurwa mai haske a cikin 123º na haske a cikin 123º na haske a cikin ciyawar).
Me kuke buƙatar shigarwa?
Baya ga tef da kanta tare da launi da ake so da kuma tsawon da ake so, kuna buƙatar:
- Mai sarrafawa. A zahiri, kwamitin kulawa. Daga ciki zai kunna hasken rana, kazalika yana kunna launi da daidaita haske. Ana iya samun ruwa da kuma nesa. Haɗi zuwa wutar lantarki.
- Tushen wutan lantarki. Yi wasan kwaikwayon na mai canzawa wanda ya canza ƙarfin lantarki ga ɗaya da ake so. An zaɓi BP Wutan lantarki, gwargwadon tsawon da ikon tef.
- Mai haɗewa . Muna buƙatar haɗawa da keɓaɓɓun guda ɗaya cikin ɗaya. Kuna iya tattara hasken rana ba tare da shi ba, amma to kuna buƙatar sayar da sawun.
Jagorar shigarwa na tef
Umarnin Shigarwa na Mataki na Mataki:
- Jimlar tsawon kaset ɗin an ƙaddara. Don yin wannan, ana shirya hanyar gasket kuma an auna cikakken tsayin, gami da wuraren da suka dace don masu haɗinawa da masu sarrafawa.
- Yanka na kintinkiri ana haɗa shi cikin layi 1 tare da masu haɗin kai (ko kuma waƙoƙi).
- An haɗa tef ɗin da aka tattara ga mai sarrafawa, kuma mai sarrafawa yana zuwa ga BP. Babban nuance: tonon suna buƙatar haɗawa daidai, in ba haka ba za ku iya kashe dantalite lokacin kunna.
- Sanya layin da aka tantance cikin soket da haske daga na'ura wasan bidiyo - don bincika. Idan hasken rana ya fadi kasa - duba haske da launuka (idan an bayar).
- Musaki tef daga mai sarrafawa da hawa zuwa wurin da ake so.
Lokacin da aka haɗe dumbai, ana haɗa shi da mai sarrafawa, kuma duba sake. Idan hasken rana yana aiki kullum - an gama aikin.
Kuskuren da zai yiwu kawai a cikin taron da ba daidai ba na sarkar.