Gyara mai tattarawa ya yiwa shi da kanka da leleplating
Don haka masu tattara sun dace sosai.
A gefen hagu, daga murhun, tare da Lamellla gaba daya ƙone zuwa insultor, to zai farfado mai sanyin karfe tare da diamita na kimanin 0.2 mm na kusan 0.2 mm. A tsakiyar mai siyarwa, amma an riga an flowed don tsayawa. An lura da Lamellae ɗaya Lamellae zuwa tushe da kuma rage daga sauran, amma hauhawar Lamella ba shi da rauni, kuma da wayoyi a cikin slats suna welded. Tsarin diamita 45mmet ya kwarara zuwa 41mm. Zuwa ga mai tattarawa mai kyau, kuma, daga murhun, ya dace da murmurewa ba tare da tsaftacewa ba, ya isa kawai don tsaftace.
Anchor karkashin tsawaita zai shirya saboda ba talakawa bane kuma sanya wanka mai amfani.
A saboda wannan, rabin kwalban filastik ya dace. Za a iya lafadan Anchor tare da scotch, kuma mai tattarawa ya ƙare don ƙarshen Lamellae, incrollyte tsakanin mai da mai tarawa ya kasance, lambar sadarwar ta wucin gadi ba a yarda da shi ba. Daga Colenp na PCV, kuna buƙatar yin sauri colk saboda haka an haɗa shi a cikin wuyan kwalban daga ciki.
Mai tattara motoci yana buƙatar yanki na ƙwararrun waya don haɗa duk Lamellla tare da wulakanci ba ya taɓa ƙugunan, amma ya rufe wurin sutura.
Tsarin mai tara a cikin lantarki, anode yana aiki azaman tanki mai ƙonawa, jimlar yankin ya zama kusan sau biyu surface. Kyakkyawan fayil ɗin tare da karkace, dan kadan ya fi girma fiye da na diamita na jirgin ruwa kuma idan aka sanya shi a cikin jirgin ruwa ya dace da bango. A debe na samar da wutar lantarki ana haɗa shi da babban sashi, da ƙari ga taya. An zabi halin yanzu daga lissafin 1,5a a 1 DM2. Zaka iya ciyar daga cajar don wayar, da daidaita lokacin da kwararan fitila na haske na iko daban-daban. Har yanzu ana bukatar kwararan fitila na haske don kare a kan yiwuwar CW a kan wanka.
Mataki na kan batun: rarrabuwa bangare tsakanin gidan wanka da bayan gida
Abun da bazai na wellkolyte:
- Takaitar ƙarfe - 200g
- Sulfuric acid 1.84 - 40G
- Barasa - 5g
- Boiled ruwa - 800ml.
- Za a iya maye gurbin barasa ta hanyar adadin vodka sau uku.
Bayan rana, muna samun cikakkiyar ra'ayi game da mai karuwar mai kunnawa.
Amma bayan tsagi da yayi kama da wannan, tunda wutar ruwan tarko, ko da yake ba daidai ba, amma fiye da yadda kuke buƙata.
Tabbas, karamin girma na wanka na iya yin gwaji tare da abun da ake ciki na waye, amma ko wajibi ne. Tare da wannan yanayin, jan ƙarfe yana da wuya, duk da cewa ba daidai ba. Sick da tsagi tsakanin Lamellas na iya zama iyakoki, ko kuma kawai ya kaishi tare da ruwan hackage kuma ka tabbatar da bincika rashin rufewa tsakanin farantin.
Don haka kambin ya shirya taro ya tara wani anga, diamita dinsa ya zama mafi girman matsayin 1mm, amma ba ya tsoma baki da komai, amma ya fi tsayi. A kan karamin karkatar, zaka iya ganin inda aka ƙone da wuta. A hannun dama yana shirye don winding ashin motar, mai tattarawa shima ya karu da 1 mm. A wannan hanyar, kusan kowane mai tattarawa za'a iya dawo dashi, sai dai in ba haka ba sai dai in ya fadi baya.