Shigarwa na dakatar da dakatar

A wannan shafin na shafin da zaku samu

Umarnin, Yadda za a kafa rufin da aka dakatar

Armstrong. Don bayyana hauhawar da aka dakatar

Mun hada da irin wannan sashin sannu kamar:

• Bayanan martaba sun yi amfani da su don hawa

  Dakatar da rufewa;

• Makirci

  Shigarwa na dakatarwar rufewa da wasu abubuwa

  zane;

• Abu

  shigarwa na dakatarwar rufewa ta amfani da shirye-shiryen shigarwa na 3;

• Ayyukan shigarwa.

Hanyar don hawa dutsen rufaffiyar

An tsara tsarin dakatarwa don rarraba kaya - 3.5 ...

6.0 kg / m 2 a kan nauyin raƙuman rufi, kuma an sanya a saman

(idan ya cancanta) Layer na abubuwan rufi. Bayanan martaba

Firam (T24h38; t15x38, Table No. 1) a kan dakatarwar bazara na bazara ana haɗe

Zuwa gindi ba Fiye da 1,200 mm (Tebur No. 2). Don hana obload

Za'a ci gaban Pinimeter na matsanancin yadda dole ne a ci nasara daga bangon

Fiye da 600 mm tare da nauyin kayan rufin har zuwa 4.0 kg / m 2 da 450

Mm tare da nauyi fiye da 4.0 kg / m 2. Mafi karancin nisa daga

Tushe ya kamata ya zama aƙalla 120 mm daga yanayin yiwuwar

farantin faranti yayin aiki.

Gabaɗaya, an sanya shigarwa na dakatarwar rufin Holstrong a cikin tsari:

• - auna dakin da rushe babban grouply perficular groupsicular.

• - Cire na Alamar rufin rufin a jikin bango da ginshiƙai;

• - Tsarin rufin rufin daga axis na daki a cikin bangarorin biyu don gano

  Girman girman faranti zuwa bangon faranti, wurare na fitilun, ƙwararrun abubuwa da sauran na'urori;

• - Rage bayanan kusurwa (POT PUT 19/24) A bangon da ginshiƙai ta amfani da downel,

  shigar a cikin 0.5 m;

• - Rage dakatarwar dakatarwa tare da sanduna a cikin tushe a gindin ginin ta hanyar anga abubuwa;

• - Shigar da na asali T-bayanan martaba 24x38 kuma a tattara su a cikin jirgin guda;

• - Shigar da trarverse T-bayanin martaba 24x32 a cikin sararin manyan bayanan martaba;

• - Shigar da T-bayanin martabar T-bayanin martaba na zamani 24x28 a cikin giciye na bayanin martaba;

• - kwanciya faranti a cikin sel firiks an yi su yayin shigarwa na tsarin firam ko bayan an gama. Kwanciya don aiwatar da B.

  Jagoran ya nuna ta hanyar kibiyoyi a kan juzu'in farantin. Maskiya

  kusa da ganuwar, ginshiƙai da sauran zane, a datsa a kusa da wurin;

• - Idan ya cancanta, a kan aiwatar da hau faranti, kwanciya zafi ko kayan rufin sauti;

• - Shigar da fitilu, gura ta iska, da sauransu. An yi shi a tsarin shigarwa.

Wasu buƙatun don hawa rufin da aka dakatar

Armstrong

Farantin shigarwa

samar da bayan ƙarshen duk ginin da shigarwa yana aiki,

gami da dukkan tafiyar matakai na "rigar", da kuma na'urar na benaye da

Glazing Windows. Tsarin dumama yakamata yayi aiki

Dole ne a iya tabbatar da ɗakin zazzabi a cikin kewayon 15 - 30 ° C.

Babban zafi zafi na iska bai kamata ya wuce 70% ba.

Shigar da babban fitilun fitila, kwandidsungiyoyin iska, da sauransu. yakamata

Yin amfani da su ta hanyar rataye su akan masu dillalai masu zaman kansu

Zane.

Idan batun sanya ƙarin Layer na zafi ko

Kayan sauti akan faranti ko shigarwa

ya kamata fitilar ya kamata ya ƙara yawan dakatarwa a cikin rabo

Kara nauyin rufi.

Lambar tebur 1. Profile T24 da T15 sun yi amfani da shi don shigar da rufin da aka dakatar

Bears Bayanin T15 da T24
Bayanin martaba T15 da T24
Profile Arterner 19/24.

Lambar tebur 2. Armstrong dakatar da rufin zanen zane mai hawa da wasu abubuwan ƙira

Armstrong da aka dakatar da tsarin Majalisar
Ɗaure dakatarwa lokacin da ke hawa rufin dakatarwar da aka dakatar, Tsanawar mai sauƙi yana canzawa tare da maɓuɓɓugan ruwa
Docking na bayanin martaba zuwa bangon yana faruwa tare da taimakon wani bayanin martaba na 19/24
Bayanan Bayanan Transvere suna da Castle a ƙarshen, wanda yayin da aka haɗa bayanan bayan rubutu tare da dako Yana samar da karfin tsari
Bayanan Bayanan bayanai sun saka daga dama daga Aboki a cikin ramukan bayanan martaba da kuma kokarin daukar nauyi har zuwa Tsaya
Bayanan Wachaling suna da amintaccen ginin, Yana ba ku damar sauƙaƙe kuma da sauri haɗa shinge na bayanan martaba biyu. Siffar ramin yana samar da taro mai sauri

Lambar tebur 3. Abubuwan da ke amfani da su lokacin shigar da rufin da aka dakatar ta amfani da tsarin shigarwa na 3

Shawarwarin shigarwa don shigarwa na dakatar da dakatarwar ranar da aka dakatar:

Fara hawa tsarin rufin Helstrong

Yadda duk hanyoyin sadarwa da aka yi niyya don jurewa da tsarin karya zai

riga an dage, saboda Gaske bayan shigar da tsarin, kodayake yana yiwuwa, amma

Kasa da dace. Lokacin zabar tsarin dakatarwa, kula da nauyi

Kayan aikin da kuke shirin sanya shi a cikin ɗan ar na karya.

Da farko, an tsara tsarin don nauyin da aka rarraba daga 4 zuwa 6.5 kg / m.kv, amma

Wasu nau'ikan da aka dakatar suna ba ku damar ƙara shi zuwa 7-10 kg / m.kv.

Da farko dai, a kwance na yanayin rayuwar da ya kamata a sanya shi.

A saboda wannan dalili, dole ne a saka kowane bango na ɗakin da farko alama

nesa da ake so daga bene, ko kuma rufin rufin data kasance

don haka tsarin da aka ɗora ya rufe dukkanin hanyoyin sadarwa da

Da karin magana da rufin rufin. Idan akwai rashi kuma, idan kuna son post

A farfajiya na dandamali na karya a mafi ƙarancin nisa daga rufin data kasance

overlap, tabbatar da pre-wajen auna tsayin duk ginanniyar gindin

Na'urorin haɗi da aka haɗa a cikin tsarin kuma suna la'akari da buƙatar wurinsu lokacin da

Ma'anar ƙaramar yiwuwar nesa tsakanin Arabus na karya da data kasance

rufe.

Bayan shigar da alamar farko, ana hasashe akan ganuwar ɗakin don haka

Domin a sami alamun da aka samu cikin sauƙi

Sarakuna, ko kowane abu matakin wanda zai iya wasa rawar. Zuwa

A farfajiya na Rawpotor bai maimaita rashin daidaituwa da kuma nuna bambanci na bene ba ko rufi

Onelap, yakamata a aiwatar da tsinkaya ta amfani da matakin ruwa - Waterpas

(fiye da dacewa kuma mafi dacewa), ko kuma mai tsawo kafinta (ƙasa da daidai kuma

dacewa), ɗaukar alama ta farko a matsayin tushen, kuma ba sa kwanciya daidai da

Bene ko rufin data kasance a wurare daban-daban na ɗakin. Bayan duk

Za a kashe bangon ɗakin ɗakin madaidaiciya madaidaiciya

Matsayin makomar na gaba na karya-birki, zaka iya ci gaba kai tsaye zuwa

Shigarwa na tsarin.

Kai tsaye hawa rufin rufin farawa da sauri ga bango, tare

Sakamakon kwance layin, bayanin martaba na musamman da aka haɗa a ciki

Saita tsarin Armstrong. Don yankan martaba a cikin girman da ake so, mafi kyau

Yi amfani da Hacksaw na ƙarfe na ƙarfe tare da ƙananan hakora, kuma don yankan

Haɗin kusurwa suna amfani da ƙwayar cuta, ko kuma amfani

mai sufuri. Bayanin haɗi ya zama dole saboda ya kafa shiryayye,

fuskantar fuska (fentin) gefe. Da sauri abubuwa suna buƙatar

Tara daidai da kayan bango.

Mataki na gaba zai kasance shigarwa na bayanan martaba na tsarin. Duk suna da tsari

Harafin da ya gajiya T amma ya bambanta a tsawon. Bayanan martaba yana da Ramin, kuma

Gajerun iyakar a garesu tare da ƙananan maganganu, wanda lokacin da aka shigar

Saka a cikin slits na tsawon bayanan. A sakamakon haka, ana samar da lattice daga

Jagora Bayanan martaba tare da sel 600x600 mm, ko 600x1200 mm, wanda

Ya dogara da tsarin rufin farko na farko. Bayan Haɗe Grille

Kawai cike da kaset na Armstrong kaset da kayan haɗi masu mahimmanci,

stacked a kan sakamakon shelves. A wannan yanayin, hauhawar lattice ne mafi alh tori fara daga

Dakin tsakiya saboda karar sikila ta fito ne daga cibiyar. A cikin wannan

Ciki na Circuit na matsanancin sel, wanda ba zai yiwu a yi daidai da daidaitawa tare da girma ba

Harshen harabar zai zama uniform kuma rufi zai yi hankali da hankali. Taɓa abinci

Ana samar da jagorori akan waya ta musamman ko na al'ada (ba girma ba

Kasa da 2 mm), ko tare da abubuwan da aka dakatar na musamman da ke wakilta

sandunan ƙarfe biyu na bakin ciki sun ɓace cikin ramuka a cikin mai lankwasa

Plate - Petal. Lokacin shigar da tsarin tare da waya, ya zama dole

Daidaita waya tare da kowane injin

Kayan aiki don rage nakastarsa ​​a ƙarƙashin kaya kuma kada ku rage

3 madaukai a cikin wuraren da aka ɗaure shi zuwa bayanin martaba da rufi mai ɗaukar hoto. Kamar yadda

Worferners don hawa kan tsarin don yin rufin gado mafi kyau

Yi amfani da sukurori tare da zobe ko ƙugiya maimakon kai - don mafi dacewa

Da sauri waya ko abubuwan da aka dakatar. Dowels don sukurori ya kamata

Zaɓi tushen akan kayan rufin rufin da aka zage shi. Ya kamata a fara maciji tare da

Dogon Jagorori, suna haɗuwa da su gajere. Jeri

A kwance griles bukatar a yi tare da wani matakin bayan cike

taro, lanƙwasa waya a cikin ko canzawa petals, dangane da nau'in

Dakatarwa. 2-3 days bayan rufin ya sami cikakken kaya,

Ana ba da shawarar jeri a maimaita.

Mataki na a kan batun: Yadda zaka Cire Wallpaper Wallpaper daga bangon

Sunan kayan	raka'a. canza	Amfani da murabba'in mita
Makirci 1.	Tsarin 2.	Shirin 3.
Bayanin martaba l = 3700 (a)	rm. M.	1,68.	0.84	0.84
Bayanin martaba l = 1200 (b)	rm. M.	—	1,68.	1,68.
Bayanin magana l = 600 (c)	rm. M.	1,68.	0.84	0.84
Dakatar s-3	PC.	2,4.	1,2	1,2
Dowel tare da Semiring	PC.	2,4.	1,2	1,2
Farin karfe 19/24	rm. M.	Amfani ya dogara da kewaye dakin
Dowel don hawa kusurwa zuwa bango	PC.	A cikin kudi na 2 akan 1 p. m kewaye
Farantin rufi	Mita na square	1.0