Art Stuccoing na bango tare da nasu hannayensu: Misalin aikace-aikace

Babban manufar filastar shine kare babban kayan bangon daga tasirin dalilai masu wahala. Irin waɗannan abubuwan da suka fara nufin danshi, ƙarancin yanayin zafin jiki da yanayin zafin jiki. Tare da wannan aikin, sanannun filastar taro wanda ya ƙunshi yashi, lemun tsami da ciminti ana cin nasara da su. Koyaya, ban da aikin kariya, babu irin wannan nau'in bears na filastar kuma yana buƙatar kayan masarufi na saman bango. Mafi kyawun kayan bango na yau da kullun shine fuskar bangon waya. Daga sauran nau'ikan bangon bango, za ku iya har yanzu yana haskaka fale-falen buraka, katako mai ɗorewa daban-daban.

Misali 1. Tare da taimakon mai ba da izini tare da tsarin, zaku iya yin tsarin taimako akan filastar.

Akwai wani nau'in bangon bango, wanda a lokaci guda yana yin duka kariya, da ayyukan ado na ado, shine filastar fasaha. Akwai ra'ayi cewa filastik na fasaha na bangon da hannayensu ba shi yiwuwa saboda hadaddun aikin. Kafin yin irin wannan lokacin, ya zama dole a gano abin da wannan ra'ayi yake.

Nau'ikan fasahar fasaha

A ƙarƙashin ma'anar "Art Stacco", kuna buƙatar la'akari da nau'ikan plastering:

• na ado;
• rubutu;
• Shafi tare da zanen zane.

Harkokin aikin ya bambanta ɗan ɗan kaɗan, amma duk suna da gama gari, waɗanda suke da alaƙa da abubuwan da suka kare:

Misali 2. Hardtauttukan kananan baiwar bangon bango na bango.

• mai santsi surface ta amfani da kayan launi waɗanda za a kashe saɓun karkara a kan kayan ado;
• Bayan amfani da bangon yana da yanayin masana'anta a ƙarƙashin hoton kayan duniya daban-daban;
• Tsarin farfajiya yana da kwanciyar hankali;
• Rashin Tsarin Tsarin Sama akan karkatar da gutsutsuren daga kayan ado daban-daban;
• Garken.

Yin amfani da bangon bango na bangon ado filastar, zaka iya samun hotuna masu gani masu zuwa:

• kirayen dutse na halitta;
• gama bangon bango a ƙarƙashin zamanin da;
• Antique Wallake Kewaya salon;
• monophonic matte ko mai sheki;
• Ruwan sama droplets yana gudana cikin gilashin taga;
• dutsen daji.

Mataki na a kan batun: An dakatar dashi Cailings: Halayen Manyan nau'ikan

Wannan kyakkyawan jerin gajeren jerin abubuwan gani wanda za'a iya haifuwa ta amfani da filastar mai ado.

Jirgin ruwa mai rubutu

Tare da wannan fom, gama a farfajiya yana haifar da tsarin taimako. Abubuwan da suka dace na iya samun nasarori zuwa 2 mm a tsayi. Tsarin taimako na iya zama daban kuma yana haifar da hanyar aikace-aikacen Layer mai yawa.

Saboda gaskiyar cewa bayan an yi amfani da Layer, lokacinta ne don bushe, wannan aikin na ƙarshe yana da tsayi sosai cikin lokaci, amma sakamakon ƙarshe ya tabbatar da waɗannan kuɗin kuɗin.

Mashahurin Trenetian

Nau'in zane-zane na kayan ado na bango tare da tasirin gani na niƙa mai marmara.

A farfajiya na filastar a cikin Haske na iya zama duka mai sheki da Matte.

Kamar yadda ƙari, lu'u-lu'u, zinari ko azurfa simulators za a iya amfani. Ba ya mulkin da kasancewar karamin taimako don gabatar da dutse na zahiri na bayyanar gaskiya da zurfi - waɗancan cututtukan gani wanda ya bambanta wannan nau'in kayan ado na bango.

Bango bango

Wani nau'in asalin bango na bango. Ana amfani da taro na musamman a bango, wanda aka girka wani abu wanda bai dace ba a saman sa, bayan haka ana amfani da Layer Layer na varnish.

Stylestal na zane-zane na fasaha

1. 

   Misali 3. Ana amfani da filastar manyan filastar don fuskantar bangon waje na ginin.

   Na gargajiya. Abubuwan da ke cikin ado na gargajiya suna daidaita kayan halitta, kamar masana'anta, kamar siliki, tsarin itace na ciki, kamar dutse, kamar dutse ko marmara. Sau da yawa, ana amfani da fenti tare da zinariya ko azurfa. Hoto na ado na kame.

2. Babban fasaha. Salon zamani tare da layi madaidaiciya da bayyanannun iyakoki. An san shi ta hanyar minimalism na kayan ado da kuma wadatar baƙin ƙarfe da abubuwan gilashi. A cikin filastar, launin ƙarfe, launin toka da fari sun ci nasara.
3. Ƙasa Da salon matsakaicin haɗuwa tare da yanayi. Hotunan bishiyoyi, faduwar ganye, shimfidar wurare na karkara sun zama ruwan dare gama gari. Green da rawaya Shaviling.
4. Fushin. Ma'anarta an bayyana shi kawai - mun haɗu da haɗawa. A cikin ciki zai iya sa a cikin shigarwa na ƙofofin a cikin salon ampire da tsarin kujerun dabbobi. A cikin kayan ado na bangon, filastar Venetian tana kusa da guntun gilashin, tale da ƙarfe.

Shirye-shiryen aiki da misalin amfani da kayan adon rubutu

Kafin amfani da filastar kayan ado, ya zama dole don shirya kyakkyawan aiki na bangon.

An tsabtace bango duk tsofaffin mayafin - fenti ko filastar. Ana samar da katse, yayin da yakamata a sami halayyar shigar ta cikin ciki. Yakamata bushewa ya zama na halitta, ba tare da amfani da mulkoki na gina gini da kuma kayan aiki.

Forwar saman saukad da fiye da 3 mm suna ƙarƙashin kawar da suturar hannu.

Don amfani da filastar da aka buga, dole ne ku tattara kayan aikin masu zuwa:

• Spantulas tare da nisa na aiki, daga 400 mm zuwa 10 mm;
• grater;
• Nesa;
• Spatula don aiki a cikin sasanninta;
• matakin gini;
• bututun ƙarfe;
• rawar soja;
• Budurwa-mai rigima don rawar soja.

A wannan matakin, ana amfani da tushen tushe na filastar amfani ta amfani da baƙin ƙarfe. Wannan ya kamata yayi la'akari da yanayin zane na nan gaba. A aikace, ana amfani da farkon Layer tare da kauri na 1-1.5 mm.

Shawarwari mai amfani: Kafin amfani da agaji a saman filasta, ya fi kyau gwada dabarar a kan wani yanki na plasteboard ko karamin sashi na bango.

Duk hanyoyin da ake amfani da su a cikin kayan ado na ado suna da dogon rayuwa mai hankali, wanda ke ba da damar samar da taimako ba tare da bushewa ba.

Ofaya daga cikin mafi sauƙin tasirin, wanda za'a iya haifuwa ta hanyar wani novice filastar, shine sakamakon dutsen. Don wannan ƙirar ado, bango baya buƙatar daidaitawa ta musamman, ana yin aikin ta amfani da kowane irin kayan ado na kayan ado wanda ya ƙare dangane da filastar ko ciminti. Babban abin da ake buƙata don asalin ɓoyayyen sihiri ne da ƙarfi da ƙarfi bayan sha da bushewa.

Game da filastar na ado a cikin irin waɗannan ɗakuna, duka dafa abinci, gidan wanka, da kuma bayan gida da yanayin zafi da yanayin zafi, Layer ya zama daidai da tushen.

Ana amfani da Putty a bango tare da Layer na 2-3 mm. Ana gudanar da zane ta amfani da baƙin ƙarfe mai santsi. A saboda wannan, an wanke baƙin ƙarfe daga mafita kuma an matso kusa da murfin rufe bango.

Bayan haka, ƙasan gefen ƙarfe yana motsa ƙasa. Motarta kayan aiki daga karagu Layer ya kamata ya zama santsi, ba tare da rushe mafita ba. Bayan kowane sashi na sarrafawa, ya kamata a wanke baƙin ƙarfe.

Bayan ya kware wannan dabara don amfani da rubutu zuwa saman filastar, zaku iya riga an ci gaba da tasiri ga hangen nesa mai hade da hade da ƙirƙirar hoto na taimako da kuma abubuwan da ke da tsari.

Babban doka don amfani da filastar fasaha yakamata ya kasance kiyaye lokacin cikakkiyar bushewa na kowane amfani.

Mataki na kan batun: Yadda za a maye gurbin Door: Zaɓuɓɓuka don Tsarin Ofarfi