Plywood ƙasa yadda ake yin a cikin Apartment

Hoto

Plywood - kayan duniya na kowa. Ana amfani da shi sosai a cikin gini, yana da nauyiweight, mai dorewa, mahalli kuma an rarrabe shi da farashin dimokiradiyya. Fanneru ana amfani da shi sau da yawa don ƙirƙirar benaye ko gyara benaye. Don gano yadda ake yin bene daga plywood daidai, ba zai zama aiki na musamman ba. Tun da wannan abu ne na duniya, ana iya amfani dashi a cikin yanayi iri iri, amma kuma dabarun aikace-aikace zai bambanta dangane da wasu yanayi.

The bene na plywood yana da dorewa da sauki don kafawa, wanda shine dalilin da yasa ya shahara sosai lokacin kammala harabar.

Nau'in kayan

A yau muna samar da nau'ikan clywood da yawa. A cikin amfani da yawa yana amfani da irin waɗannan nau'ikan:

Daraja plywood.

1. FC - plywood danshi-resistant, dangane da resoxic carbamide, mara amfani da rasawa da dorewa.
2. NSH - a buɗe plywood a kan manne manne. An dauke shi mafi arha, tare da kauri 12 mm. Idan an shirya don tsaftace parquet ko abu mai kama da irin wannan duniyar, wajibi ne don yin wa'azi da fata.
3. C1 - kayan don gina bene mai wuya. Flywood a gefe ɗaya yana ƙasa, tushen glue ne casein.
4. S2 kuma a kan lamari a zahiri, nika a garesu. Idan dakin da ya kamata a shirya daga sama, bushe bushe, tare da yawan al'ada ana tsammanin, ana tsammanin farashi mai yawa, ana iya amfani dashi azaman madadin plywood FC.

A cikin wuraren shakatawa, da ba a ke so don amfani - wannan kayan ginin shine hygroscopic kuma a cikin yanayin zafi da sauri zai yanke hukunci da sauri. Phaneur, an yi niyya ne domin benaye da bango, ba za a yi amfani da su a baranda da dafa abinci ba, a bayan gida, ɗakunan wanka.

Yadda za a shirya fan kafin aiki

Masu girma iri na plywood.

Don inganta juriya na plywood, ana ba shi da ciki a gida tare da payvinyl acetate - yana kama da ruwa mai daraja da tsada. Aiki yana farawa ne a gefe guda kuma yana lalata da phaneer kamar yadda zai yiwu. Sa'an nan kuma impreggnate Sauyin, ya mamaye ciki zuwa cikin yadudduka biyu, ya kamata a yi amfani da na biyu bayan an bushe ta farko. Ana bushewa bushewa a zazzabi a daki, domin wannan za a buƙaci aƙalla kwanaki 3. A lokacin da zanen plywode ya bushe, dole ne a yi musu bushara da wakilin maganin antiseptik, wanda aka yi niyya don aiki da itace.

Mataki na a kan batun: Yadda ake yin Inverters (Masu sauya) 12-220 v

Don haka, farfajiyar farfajiya ta juya ta zama mafi dorewa, amfani da varyic varnic. Hakanan ya kamata a shafa a cikin yadudduka biyu, kowannensu ya kamata a bushe shi gwargwadon iko. Idan don saƙƙarfan ado, an yanke wa Firayimine don kula da ayar, dole ne a yi kafin lacquer yana da rufi.

Kafin kwanciya da faranta wa kasa, ya zama dole don aiwatar da aikinta. Ya kamata a yi kai tsaye a wurin da aka yi shirin yin kwanciya. A {acclimatization kwanakin da aka ƙaddara gwargwadon bambanci a cikin zafi da zazzabi a cikin dakin. Idan a cikin wurin da aka adana kayan a gaban wannan, yanayin yayi kama da waɗanda ke cikin ɗakin da aka gyara, don ɗaukar hoto ya isa har zuwa yau. Lokacin da bambanci a yanayin zafi daga digiri biyu zuwa takwas zai buƙaci kwanaki biyu-da, tare da mafi girma - daga bakwai zuwa goma. A lokacin aiwatar da tsari, ya zama dole a adana abu a cikin ɗakin a cikin wani wuri a kwance a cikin wani tari.

Ta yaya bene na plywood

Overying daga plywood an gina su duka lokacin da sabon bene, kuma a cikin batun lokacin da ake buƙatar gyara da ya riga ya kasance.

Don haɗawar daban-daban na jinsi na tushe da kayan ado Gama gama kwalliyar kwalliya, kwanciya ta bambanta sosai.

Plywood kwanciya shirin a kan allo.

Lokacin sanya kayan akan bene mai kankare, yana yiwuwa a samar da duka biyu a kan screed, kuma a kan pre-shigar. Za'a iya amfani da lambar zaɓi kawai idan tushen yana da kyau, santsi, da kayan da za a yi amfani da su zuwa murfin gama gari, Filastik. Kundin kashin baya, bayan da mafita ya ce, ya kamata a tsotse a zazzabi na al'ada akalla kwanaki 40.

Don shirya bene na plywood tare da lebur da busassun screed, ɗakin don farawa yana sakin hankali sosai, yana da kyawawa don tsabtatawa mafi kyau don amfani da injin tsabtace don amfani da injin tsabtace. Ana aiwatar da magani na bene, gama wannan kuna buƙatar mastic don parquet ko bitumen varnish, wanda ya saki daidai da umarnin. A lokacin da suke aiwatar da irin wannan aikin, buɗe windows ya kamata a buɗe, dole ne ku ma sanya murfin numfashi. A cikin gidan ya kamata a cire shi gaba daya ta hanyar wutar lantarki, tun lokacin da aka cika iska yayin aiki yayin aiki a cikin aiki za a cika shi da nau'i-nau'i. Duk wani bazuwar lantarki Spark anan zai zama superfluous.

Mataki na kan batun: lissafin zafin ruwa

Phaneur 8-18 mm lokacin farin ciki a cikin ratsi ko murabba'ai a cikin kwata na takardar (1250x1250 mm). Kuna buƙatar sa su, tare da karamin canzawa - seams huɗu kada ya haɗu a wani lokaci. Ana yin kayan abu ta amfani da kayan aikin wutar lantarki, yana iya zama padzik ko kun gani. Yin yankan, ya kamata a lura cewa a kusa da kewaye dakin zai zama dole don barin rata a cikin 20-30 mm.

Matakai na shigarwa na baƙar fata daga plywood.

Shirye guda na plywood an sanya shi a ƙasa don aiwatar da fit da yawa. A ƙarƙashin ƙarshen nau'in nau'in linoleum ko jams ɗin zirga-zirgar ababen hawa, za ku iya manne wa manne kamar mai taɓawa kamar wannan, ba tare da yin ramummuka na hawa ba. Sai dai itace bene mai iyo. Harshen zanen gado ya kamata su ma glued a hankali.

A karkashin parquet na itacen oak ko kama da kaddarorin a kai, phaneur hade mafi kyau a kan sukurori na 4x60 tare da dowels. Yankunan plywood na rarraba, lura da hawa dutsen slit 2-3 mm.

Forru cikin zane na plywood, flump a kan ramuka - ya kamata su kasance a cikin ramin kafafun kafaffun kai. Rames dole ne ya kasance a cikin sasanninta, a tsakiya da a tsakiyar kowane gefe. Babban ramuka na tsakiya don za a canza su game da rabin mataki tare da dogon gefen, wanda keɓaɓɓe na tsiri, mai sauƙi ban mamaki, da sauki da sauri.

Yanzu fa Faneru za a iya cire su zuwa gefe, kuma a cikin kankare, ramuka na downles don waɗancan alamun, waɗanda suka kasance daga rawar soja. Lissafta downels a ciki.

A gefen juya gefen plywood, shafa manne tare da spatula, sanya kayan cikin wuri. Aauki mai sikeli kuma ya doke dunƙulewar kai zuwa matakin da shugaban zai ɗan ɗan nutsuwa da shi a cikin phaneur.

Yadda za a sanya bene na plywood akan lags

Canjin Motaƙwalwar Deski tare da Yarda da Flywood.

Mataki na a kan taken: rufin murfin rufewa tare da hannuwanku daga wurin zuwa z

Wasu wuraren zama na iya haifar da shakku na zafin jiki da zafi. A cikin waɗannan halayen, ƙasa na plywood yana ƙoƙarin shirya Lags. A lokaci guda, ya kamata a lura da wasu maki:

1. Don lags, ya kamata ka zabi allon da ba a kashe ba a cikin 100 mm.
2. Kayan abu don karbaru masu zuwa, dole ne ka kauna aƙalla mako guda a cikin dakin da aka shirya amfani da su. Bayan haka, ya zama dole don tsara allon kuma cire waɗanda suka haifar ko suka yi taɗi.
3. Zabi wani abu na bene, yana da kyau ka tsaya a irin wannan nau'in kamar FC, ko kuma tsari na zanen gado tare da inganta kaddarorin aiki don inganta kaddarorin aiki don inganta kaddarorin aiki don inganta kaddarorin aiki don inganta kayan aiki. Yawan kauri yakamata ya zama aƙalla 12 mm.
4. Ana shirya shirye-shiryen harsashin da aka yi ta hanyar da na bene a kan screed.
5. Daga cikin lags suna yin akwakun a mataki na 300-600 mm a cikin irin wannan hanyar cewa gefuna gwal na plywood za su zo lags.
6. Sashe na sashe dole ne cika kayan tare da hydro da kuma rufin da ke rufe ƙasa. Polyurethane kumfa da kyau. Ba za a iya amfani da auduga na ma'adinai ba - ƙananan barbashi sun fito daga ciki a cikin iska, wanda zan iya tsoratar da jikunan numfashi a cikin manyan mutane;
7. Ana yin katako na zanen gado na plywood tare da wap mai wajibi a cikin mm 2-3, ya kamata a lura da sharewar a cikin 20-30 mm kusa da biranen.
8. Phaneur yana haɗe da layi ta amfani da ƙusa na ruwa. An yi gyara ta amfani da subsanƙun-kai na kai.

Yanzu an gama gama kare: ana iya rufe dan wasan fenti da kayan varish ko kwanciya a saman linoleum, laminate, parquet, da sauransu.