Polymer yumbu kayan filastik ne don yin zane-zane, wanda aka samar da kayan ado daban-daban, abubuwan kayan ado, kyaututtuka, tsutsotsi. Wannan kayan yana kama da filayen filastik na al'ada. An gama samfuran samfuran a cikin tanda a zazzabi na 110-130 digiri. Tare da zazzabi mai kyau da masana'antu, kayan ya zama mai ƙarfi da m. Yin aiki tare da yumbu na polymer don sha'awar novice ba zai zama da wahala sosai ba, ya isa ya san ka'idodi da kuma fasaha, to kayan adon za su daɗe.
Samar da blanks da hanyoyi
Don ƙera kayan ado, yawanci ana yin su sau da yawa a cikin "sausages", daga waɗanne samfuran samfuri ne a nan gaba. Yi la'akari da aji na Jagora akan keran kayan shirye-shirye daban-daban don kayan ado.
Don irin wannan aikin da ake buƙata abu:
- yumɓu launuka biyu;
- ruwa ko wuka;
- layi;
- Guda da sanda;
- safofin hannu;
- Latsa don fashewa.
Muna ɗaukar yanka iri ɗaya na yumbu sama da murabba'ai (8 * 8 cm), kimanin kauri shine 0.5 cm.
Yanke cikin rabi kuma kowane bangare yana da yankewa. Mun matsa wa juna, kamar yadda a cikin hoto.
Mun ninka cikin tsiran alade.
Mun tatsa murƙura a cikin karkace, danna teburin kuma mirgine a cikin shugabanci. Ya fitar da irin wannan karkace.
Ana samun kyakkyawan zane a ciki.
Kuna iya amfani da irin wannan ɗakin aikin ko wuri a cikin latsa kuma matsi.
Irin wannan ra'ayi yana da a cikin yanke.
Don yin zane mai girma, a yanka tsiran alade a bakin ciki ratsi.
Kuma zaka iya amfani da kayan adon daban-daban.
Beads da yawa
Kuna iya samar da irin waɗannan launuka masu launi daga launuka daban-daban kuma tare da alamu daban-daban.
Don blanks fure muna bukatar:
- 5 Launuka 5 na yumɓu waɗanda ke ƙarfafa kanta;
- wuƙa ko ruwa;
- Mirgina da akwati;
- Safofin hannu.
Mataki na a kan batun: Tsarin Emits: "Baba Yaga" Download
Muna ɗaukar farin launi kuma muna samar da tsiran alade - diamita na 4 cm, tsawon 8 cm.
Muna ɗaukar launin toka da kuma mirgine lokacin farin ciki 2 mm.
Kunsa wani farin sausages tare da launin toka, wuce kima yanke.
A kan launin toka, mun kuma mirgine a kan kuma juya kore.
Raba farin yumbu a kan sassa 3 don nesa iri ɗaya ne, kuma a sha rana, kamar yadda suke cikin hoto.
A cikin yankan saka guda na launin toka.
Sa'an nan kuma datsa kayan aikin don haka duk bangarorin suna da alaƙa da juna. Kuma samar da sifar da ake bukata na petal.
Muna raba tsiran alade ga adadin bayanan da ake so.
Daga yellow mai launin rawaya suna yin tsiran alade, zai ba mu kamar yadda ainihin fure na gaba.
Wajen launin ruwan kasa mai launin ruwan kasa da kuma juya silinda.
Kuma a hankali latsa. Gyara furannin zuwa zuciyar.
Mun samar da chamomile.
Faske cike lage lãka.
Mirgine akan kayan kore kuma juya duka farfajiya.
Matsi a hankali, mun saki iska tsakanin yadudduka.
Zamu iya ci gaba zuwa yankan sassa.
Gwada, gwaji tare da furanni, ana samun samfuran daban-daban.
Fadada mara nauyi
Don aiki, muna buƙatar:
- Yumbu kai-hardening;
- tsare;
- mold;
- wuƙa ko ruwa;
- Awl;
- kayan haɗi;
- Dutsen da jirgi.
Daga Koben, mirgine kwallon kuma kunna shi tare da bakin ciki Layer na baki yumbu, muna cire kayan da yawa.
Shirya zagaye ball sokin fil.
Mirgine kan yumɓu - 3 mm, saman tare da tsare da matsi da molds.
Kuma a sassauta a sake kowane droplet.
An rufe shi duka.
Gyara sarkar, da kuma ado ya shirya.
Bidiyo a kan batun
Dubi zabin bidiyo don ƙirƙirar kayan ado na polymer