Motar ta zama mafi kyawun abu na ciki. An buƙaci shi musamman a adadi mai yawa lokacin da masu son su dauki baƙi da yawa. Kuna iya yin stools da hannuwanku.
Stool ne na duniya da m, wanda shine dalilin da yasa irin wannan nau'in za'a iya gani a yau a kowane ɗakin zama.
Amma idan kayi wannan aikin a karon farko, ya kamata ku san 'yan lokaci kaɗan:
- Mafi m ra'ayi game da haɗin shine "Paz-Schip". Amma ya kamata a shafa ta a cikin batun lokacin da akwai ƙwarewar fahimtar ƙwarewa. Yana buƙatar daidaito lokacin yanke wa tsagi, in ba haka ba ƙirar ba zai da karko, kuma yayin aiki, FIBER, FIBERS FIBER zai kirkiro CRAK.
- An kirkiro da stoolan don motsi na yau da kullun. A saboda haka, ana buƙatar kayan don kerawa don zaɓar irin wannan ba "ya bazu da sauri ba." Ya kamata kuma ci gaba da sauri-faci abubuwa, kamar su skurs, kusoshi ko kuma sukurori.
Duk waɗannan lokutan duka ya kamata a la'akari da su kafin yin stool, idan idan an ɗauki sabon aiki don aiki.
Me ke sa matattara?
Zane da kuma masu girma na talakawa.
Ya danganta da salon cikin ciki, zaku iya samun kujeru na cikakken siffar da kayan, har zuwa ƙarfe. Ga masoya masu kauna, dutse ko gilashin gilashi za'a iya zaba. Kodayake mafi mashahuri da kayan araha har yanzu sun kasance matattarar itace.
Mafi sauki ƙirar irin wannan kujera ya ƙunshi wurin zama, kafafu 4 da faranti. Kuna iya yin hoto ta amfani da abubuwan da ke gaba:
- Brus 3x30 mm, wanda zai yi aiki a matsayin kafafu;
- katunan biyu (14.5x30 cm, kauri - 2-2.5 cm);
- Tallan Plywood (kauri 1.2 cm);
- manne;
- takarda emery;
- acrylic varnish;
- Zane-zane a girman 4 cm.
Idan irin waɗannan kayan suna ƙarƙashin hannu, to, zaku iya fara yin matattara.
Zabi na kayan aikin da ya dace
Zane da tabarbule da kafafun kafafu.
Ainihin, da ƙirar stools daga itacen ba ya zama wani abu mai rikitarwa. Babban abu shine a sanya kayan aiki na dama, wato:
- dalla-tse da gashi;
- Crucifik sikelin sikeli;
- rawar soja;
- mitar gini da kusurwa;
- mai sauki fensir;
- rawar soja;
- Buroshi karkashin varnish.
Idan akwai ilimin firamare na kayan gini, sannan ɗayan abubuwan da ke sama za a iya maye gurbinsu da analogue. Amma sabon karatun ya fi kyau a manne wa wannan jeri don sauƙaƙe aiwatar da dukkan aikin.
Mataki na a kan batun: sakin tufafi a loggia: ergonomics da hadari
Koyarwa da shirin aiwatarwa akan yadda ake yin matattarar
- Mataki na farko shine shirye-shiryen tallafi, wato kafofin. A saboda wannan, an yanke katako zuwa daidai huɗu na 43 cm tsayi. Daga allon, maki na biyar ne, saboda haka ana zaɓar tallafawa biyu tare da girman 14.5X30 cm.
- Flywood zai zama farantin mai haɗawa. A saboda wannan dalili, an yanke takarda a cikin wani sashi na 10 da 27 cm. Bayan haka, an yanke ta ne ta hanyar tsagi (1.2x5 cm), kuma nesa daga gefen 3 cm, daidai yake da kauri daga kafa. Ana tattara abubuwa da aka samu a cikin murabba'in, wanda zai zama firam.
- Bugu da ari, firam na plywood, wurin zama da kafafu suna da alaƙa.
Tsarin Majalisar Tubereard.
Don yin wannan, a cikin wuraren da suka dace kuna buƙatar rawar soja don shirya ramuka inda duk abubuwan da aka haɗe da stoolukan za a haɗe ta amfani da sukurori. Don haka kama da kama shi ne mafi aminci, wuraren da wuraren mahaɗan za a iya bude tare da manne a Auxilas. PVA ya dace da wannan dalili. Ga matattararsa daga itace, ba zai zama superfluous don yin aiki a makarantar koyon ba, mafi daidai cire shi. Zai yi santsi na haƙarƙarin haƙarƙarin, saboda abin da samfurin zai sami ƙarin kyan gani.
Itacen yana da irin wannan tsarin da dussers a farfajiya an kafa tare da shi. Domin goge stool, ana amfani da takarda mai bayani, kuma masana sun bada shawarar yin a cikin raga biyu. Wato, aiki na farko tare da m sandpaper, sannan kuma mai kyau-tsakel tafiya tare da saman. Grinding yana taimakawa kawar da ba sabani ba ne kawai, har ma don ba da cikakkiyar samfurin "leveled".
Lokaci na ƙarshe shine buɗewa tare da varnish. Mafi kyawun duka, idan za a shafa varish a cikin yadudduka biyu. Amma kawai mai biyo baya ana aiwatar da shi lokacin da Layer ya gabata ya bushe.
Lokacin da ya kamata a tuna da stools daga itace game da amincin mutum. Misali, kwakwalwan kwamfuta zasu iya shiga cikin idanu ko skewer a cikin fata. Saboda haka, ya zama dole a yi tunani a gaba game da hanyar kariya: safofin hannu, tabarau, da sauransu.
Sigar zane na biyu na stools
Sama da shi an bayyana yadda ake yin matakai mafi sauƙi tare da hannayensu. Amma akwai wani zaɓi mafi ban sha'awa na giciye da wurin zama mai taushi. Wannan shine abin da samfurin zai tattauna.
Mataki na a kan taken: Bots ɗin Malecric da Galoishes
Da farko, mun girbe kayan aikin aiki da kayan:
Na'urar injin dinki.
- Katako katako tare da sashin giciye na 60 mm;
- Rake (3x6 cm);
- takardar plywood (kauri 1.2-1.5 cm);
- Kayan abu (Mafi ƙarancin kauri na 10 cm);
- zane don m wurin zama;
- kusoshi, sukurori, labaran gine-gine;
- Madauwari saw da siketdriver;
- Tasel, Moro;
- lacquer don buɗewa ko zanen;
- Marker, fensir;
- aunawa na mota;
- Stuglo.
Da kuma abu na farko da aka shirya tushen kafafu. A saboda wannan, 4 sassan an yi shi ne da mashaya, kowane 60 cm tsawo. An kera su ta karye a digiri 45. Irin waɗannan ayyukan ana yin su ta amfani da tsantsan.
Lokacin da sassan da suke shirye, dole ne a yanke su a nau'i-nau'i, wato, a kan haruffa "x" a kan hanya. A saboda wannan dalili, kuna buƙatar shirya tsagi akan kowane billet. Girman zurfin rami dole yayi daidai da rabin kauri na mafi yawan katako. Wato, idan kauri daga mashaya shine 6 cm, to, dole ne a sarrafa shi, saboda kada kafafu da aka ɗaure da wata alama 6 cm don alama, wato, kauri. Saboda haka, yakamata a sami wasu nau'ikan tsarin x-fasayi.
Saboda haka sai matattarar ya tabbata, ya kamata a gyara 'yan gudun hijirar da juna.
Don yin wannan, kuna buƙatar katako da aka yi daga wani ɓangaren mashaya. Tsawon shinge dole ne ya dace da girman matattara. A wannan yanayin, shi ne tsawon 48 cm. Domin ya zama jan ƙarfe tare da duka crossebs, ana buƙatar sukurori. Don haka samfurin yana da ƙarin kyan gani na yanzu, a ƙarƙashin masu fasteners an yi shi da ƙananan reshe. A ƙarshen duk aikin, waɗannan abubuwan suna jingina zasu ɓoye a ƙarƙashin fillla na musamman ko amfani da iyakokin filastik na musamman.
Wajibi ne a haye kafafu kuma a saman sashin gicciye. Ga kowane haɗin, ana amfani da sulkuna biyu.
Lokaci na ƙarshe kawai shine "ɓoye" Hats na sukurori. Hakanan, ƙafafu suna buƙatar rufe ko fentin a cikin wani launi zaɓaɓɓu.
Shawarwari masu amfani
Amma abin da matattara ba tare da wurin zama ba. A cikin shari'ar farko, ta kamu da bambance-bambancen itace da aka nuna madaidaicin sidwa. A cikin wannan yanayin, ƙira tare da m farfajiya ne.
Mataki na gaba akan taken: Embroidery tare da makircin giciye: A cikin wani hat mace da namiji, a cikin ja, tare da jug da hawan keke, tare da laima
Za a kashe wurin zama mai ƙarfi, kuma a saman - tushe mai taushi. Don ƙaramin abu, an yi nufin fil. Kauri da aka ba da shawarar ba kasa da 12 mm, in ba haka ba zane zai zama mai rauni sosai kuma ba zai iya yin tafiyarsa kai tsaye ba.
A cikin wannan misalin, tushe yana da girma na 40x60 cm. Gabaɗaya, wannan shine matsakaita matsakaici na stools na itace. An yanke wannan tushe daga plywood tare da madauwari gani. Yawan girma dole ne ya sami roba. Kayan kayan gaske wanda zai gyara roba roba tare da folywood. Yana nufin cewa ya kamata ya sami yanki na 30% fiye da tushe.
HAKA HAKA HAKA, Ya kamata ka auna tsayi da nisa na gefen da aka samu. Ya kamata kuma a ɗauka a cikin zuciya cewa ya kamata a haɗe da masana'anta a cikin flywood, yana nufin cewa ya zama dole don yin ƙarin hannun jari. Zai fi kyau idan babu fannoni a kan kusurwoyin stools, zai dade, ba tare da yin firgita ba.
Don gyara zane, maɓallan nema. Kuna iya gyara su a wurare biyu: a ƙasa da kan tarnaƙi. Idan maɓallan sune mafi sauki, to ana amfani dasu don haɗe-girke na farko, amma idan akwai kayan ado, to ana sanya su mafi kyau a gefen. Kodayake ana iya haɗa ƙarin ingantaccen amintattun duka hanyoyin. Saboda haka an bayyanar da hoton da ba a sani ba, an aiwatar da karfin kawai tare da masana'anta ta taut.
A zahiri, don ƙirar mai dafa abinci, zaku iya ɗaukar kowane masana'anta ko ma jita-jita. Duk yana dogara ne da ciki, sha'awar mai shi da ƙarfinta.
Mataki na ƙarshe a cikin taron irin wannan matattara shine haɗin duk abubuwan da ke cikin zane ɗaya. Tare da taimakon sukurori, an haɗa wurin zama zuwa kafafun bishiyar da aka samo.
Kamar yadda a bayyane yake, gina matattarar itace da aka yi da itace da da hannayensu. Duk kayan da ake buƙata da kayan aikin suna da sauƙin samu a gida ko ma bayar da rance daga maƙwabta. Kuma a lokaci guda akwai koyaushe damar sanya duka baƙi a gida, kuma ba a gudu zuwa ga kujerun kujeru ba.