Ganyen bango ba shi da tsada kuma mai sauri. Tsarin ya ƙunshi kawar da tsohuwar ƙwayayen, tsaftacewa daga farfajiya, cire lahani, jajirewa da amfani da sabon kayan launi. A yayin aiwatar da kowane mataki, shawarwari na kwararru yana faruwa don taimakawa samun cikakken sakamako.
Tsarkakakkun bango daga tsohon rufewa
Tsarin ya dogara da nau'in yadudduka, don haka nuffan ana la'akari da su:
- Fuskar bangon waya. Ana amfani da hanyoyi daban-daban don cire su. Hanyar gargajiya ita ce amfani da spatula ko m ƙarfe. A baya can, gulman gwangwani suna tare da ruwa mai ɗumi . Ana sayar da kayan aikin sunadarai na musamman akan kasuwa, wanda aka tsara don cire fuskar bangon waya. Sun shiga tsarin kayan, wanda ke haifar da hasken hasken su daga tushe. An cire flisel ko vinyl fuskar bangon waya mai sauƙi ta amfani da mai dumama mai dumama.
- Whabenwash. Wannan kayan an cire gaba daya daga bangon. Hanyar gargajiya tana bushewa da fari, wanda ake iya cire shi da spatula sauƙi. Wata hanyar ta ƙunshi cire kayan tare da bushe sputula ko mashin nika. Da sauri ke kawar da mafita na musamman mafi kyau, amfani ta amfani da jere.
- Tayal. Ana ɗaukar hoto daga tushe tare da spatula, mai aiwatar da shi, sandar da ke tare da chish, ko injin niƙa.
- Zane. An kawar da shi ta hanyar mafita na wanke na musamman, kazalika da hanyar injiniya don amfani da rawar lantarki mai ban sha'awa tare da bututun iska ko goga ƙarfe.
Bayan kawar da tsohuwar hanyar rufi, ana bincika damuwa da yanayin tushe. Idan ya cancanta, ana yin gyare-gyare.
Gyara Gyara
Idan ana gano lahani daban-daban masu rarrabe ta hanyar fashewa ko kuma suka samu, an ayyana su.
An cika ƙananan ramuka da mafita na polymeric, wanda aka kwatanta da babban filastik da bushewa. Idan akwai zuriya mai zurfi, ana amfani da ramuka masu haɓaka, bayan abin da ramuka suke cike da hawa kumfa. Bugu da ari, tushe ya jinkirta tare da grid na galki da ke ba da kyakkyawan tushe ga filastar.
Aikace-aikacen filastar da putty
An raba matakin jeri zuwa matakai:
- Don tushe, ana amfani da poster;
- A farfajiya, idan ya cancanta, ana sarrafa shi ta maganin antiseptics waɗanda ke kare adawa da abin da ya faru na naman gwari ko mold;
- Ana amfani da filasanci, wanda wadanne hasken haske ne pre-fallasa, yana ba ku damar samun ingantaccen santsi mai kyau;
- Don bushewar ɗakuna da dumi, cakuda gypsum ya dace da ginin culma;
- Ana matsar da mafita kuma ana rarraba ta amfani da dokar;
- Bayan bushewa na ƙarshe daga filastar, ana amfani da saida wanda aka yi amfani da shi, wanda zai ba ka damar yin ado cikakke bango.
- Ana rarraba Putty a cikin babban spatula ko tantanin halitta;
- Kauri kauri ba ya wuce mm;
- Da Putty bayan bushewa an tsara shi ta hanyar grater na musamman wanda aka gyara sandpaper;
- Ana yin tsari na nika ba tare da aikace-aikacen ƙoƙari na mahimmanci ba, motsi madauwari;
- Madadin kayan aiki na hannu, ana amfani da injin din nika.
Hankali! Ana sayar da Putty a cikin nau'i na cakuda da aka gama ko bushe foda ya motsa da ruwa a cikin ingantacciyar rabbai.
Bayan aikin da aka yi, tushe ya shirya sosai don fenti.
Mataki na a kan batun: Yadda za a zabi Gidan Cat mai salo don ƙaunataccen Kisa?
Jeri na plasterboard
Idan akwai mahimmancin rashin daidaituwa ko lahani akan bango, saboda haka, dole ne ya yi lokaci mai yawa da kuɗi a kan jeri tare da taimakon filastar, yana da kyau a amfani da bushewar bushe. Zanen gado tare da firam na bayanan martaba ko katako, kuma ana iya samun glued zuwa ganuwar.
Ana biyan dadewa sosai ga saurin zane na farko, waɗanda sauran zanen gado suke bayyanawa. Daidai shigarwa na kowane bangare yana tabbatar da matakin. Abubuwan haɗin gwiwa tsakanin zanen gado suna ɗaukar nauyi da kuma sarrafa ta hanyar kariya ta kariya. A rufe yana da grinning da ƙasa, sa'an nan kuma amfani da Layer na fenti.
Ƙarshe
Shiri na bango ga an yi shi ta hanyoyi daban-daban waɗanda suka dogara da yanayin gindi. Wannan yana amfani da filastar ko plasterboard. Daidai na shirye-shiryen ya dogara da yadda m da manne zai zama shafi na zane.
Yadda za a shirya bangon a ƙarƙashin zanen (1 bidiyo)
Shirye-shiryen bango don zanen (8 hotuna)
