Yin baka a ƙofar ƙofar yi da kanka

An riga an yi amfani da arches a cikin budewar na dogon lokaci, kamar yadda aka yi imani cewa wannan bude kayan gine-gine yana da kyau sosai. A yau, motocin suka tashi a cikin ƙofofin ƙofa sun shahara saboda gaskiyar cewa suna da sauƙin tattare daga busassun. Tare da isowa daga arches daga busassun, ya yiwuwa a raba abubuwan gabatarwa, ba tare da amfani da wannan kokarin na musamman ba. A ƙafafun arched za su taimaka wajen bayar da kowane ɗabi'a.

Godiya ga baka, zaku iya gani da ƙaramin sararin samaniya na farfajiyar, dafa abinci ko ɗaki.

Amma ga siffofin baka, akwai da yawa daga cikinsu. Maching plasterboard annes, zaku iya sake zama kusan kofe na tarihi. Babban dacewa shine plasterboard abu ne mai sassauƙa. Mun kunna kwaya a ƙofar kofar gwargwadon tsarin mai zuwa:

1. Duk ma'aunai dole ana yin su kuma ana kiranta kayan da ake buƙata.
2. Na gaba an shirya duk kayan aikin da ake buƙata waɗanda za a buƙaci yin aiki.
3. An yanke fuskokin fuska na arches, an yanke firam daga bayanin martaba ko bishiyoyi.
4. Na gaba ana haɗe da abubuwan da ke gaban arches.
5. Ƙananan sassan an yanke shi kuma a haɗe.
6. Arched suna haɗe da sanya dukkan saman.

Wadanne abubuwa kuke buƙata?

Za a buƙaci kayan da kayan aikin don aiki:

Irin ƙirar arches.

• Gypsum Carton tare da kauri mai 9.5;
• Jagora Bayanan martaba - 27x28 mm;
• Bayanan martaba na Rack - 60x27 mm;
• Tuba Tuba na kwalliya na kwalliya na GAN (Shirin Brywall) - 3.5x25 mm;
• Dowels tare da sukurori - 6x60 mm don rage firam ɗin bayanin martaba (zaku buƙaci idan an yi ganuwar da tubali ko kankare).
• Tuba ta hannu tare da manema labarai mai latsa - 4.2x12 mm;
• Japping na kai (idan an yi ganuwar itace);
• Nutse cikin glk;
• allura mai narkewa don sauƙaƙe zanen gado;
• Arched kusurwa tare da yin;
• wuka wuka;
• Screwdriver;
• safofin hannu kariya;
• Caca;
• Corantnic;
• fensir;
• Almakashi na karfe;
• Hoton Stative don yankan GANG.

Mataki na kan batun: kwanciya da laminate akan Chipboard, linoleum, parquet (bidiyo)

Wane irin nau'in zai iya zama?

Budewar kofofin ko windows za'a iya bayar da amfani da kirkirar baka. Akwai wasu files da yawa waɗanda za a iya yin su a cikin gidanka. Idan ka zabi, kana buƙatar zama jagora ba wai kawai ta dandano fifiko ba, har ma da sigogi masu zuwa: Da farko sigogi: Da farko sigogi: da farko daga dukkan rufin rufi da fadin ƙofar. Don haka, wasu tsarin suna da kyau a tsintsaye, yayin da wasu, akasin haka, a low. Views:

Zane zane zane.

1. Portal - Wannan rukunin yanar gizon ana yin su a cikin hanyar harafin P. Theungiyar P.Kaya daga cikin ƙungiyar ta iya zama daban: Polygonal ko wavy. Duk yana dogara da kayan da fantasy na maigidan gidan.
2. An bambanta kifayen gargajiya daban da aka kira "Classic". Wannan nau'in baka ya dace kawai don cyeilings, tsawo wanda ya fi tsayi 3 m. A matsakaita, tare da nisa na bude 90 cm, kusan 45 cm na tsayi zai mamaye ars, don haka tsawo na 2.5 m bazai isa ba.
3. Soyayya. Wannan zabin yana da kyau don buɗe bude, in mun gwada da ƙarami a tsayi. Tsakanin kusurwar zagaye, an yi shi ko dai a wani kwana ko a kwance.
4. Zamani. Wannan nau'in yana da kyau don yin ƙofar kofa a cikin wani gida na hali. A lokaci guda, kusurwa na iya zama duka biyu zagaye da kaifi.
5. Rabi a rana. Wannan zaɓi yana da ikon aiwatar da yin ɗarawar ɗakin.
6. Kogin kai tsaye ne kyakkyawan zaɓi don dakuna da aka yi a cikin salon babban fasaha da zamani.

Bugu da kari, da maganganun sun sha bambancen duka.

1. RADIus (asymmetric) shine mafi sauki kuma a lokaci guda mai sauƙi fasahar da zai dace da kowane ciki.
2. Matakin da yawa. Ana amfani da wannan ƙirar musamman a lokuta inda ake yin ciki a cikin takamaiman salo.
3. Bude aiki ya dace da duk lokuta, ban da waɗanda aka yi a lokacin da bangon da aka yi a cikin tsari misali.
4. Dome da symmetric sun dace da arches na gargajiya, wanda ba kasa da 1 m.

Budewa kofa: yi ma'auni

Hanyoyin da aka tanada takardar sharar plasterboard: bushe da rigar.

Kafin yin baka a ƙofar kofar, kuna buƙatar yin duk matakan da suka dace. A zahiri, kuna buƙatar farawa da ma'aunin buɗewa. Wajibi ne a gano tsawo da nisa na bude.

Mataki na kan batun: Gina ƙafar ƙofar tare da hannuwanku. Yadda ake tara ƙofar da ƙofar daidai. Hoto

Game da nisa na baka, ya kamata ya zama daidai da nisan da ke tsakanin bangon ƙofar. Wajibi ne a auna wannan nesa kuma ya raba shi cikin rabi. Ana buƙatar wannan girman don yin ainihin semicircle.

Bugu da kari, ya zama dole a tantance a gaba da nau'in baka na gaba. Idan an zabi kututtukan gargajiya, to kuna buƙatar daidaita bangon. Dole ne su kasance gaba daya a tsaye, saboda haka baka ba ya kalli m. Daidai bangon yana buƙata tare da taimakon hasken wuta tare da putty ko filastar.

Shiri na GCC don baka

1. Da farko dai, kuna buƙatar fensir na yau da kullun da m igiya. An ɗaure fensir da igiya kuma ya zama kyakkyawan kyakkyawan babban-sikelin wurare dabam dabam.
2. Na gaba, an yiwa glc a tsakiyar - wato, radius ne na gaba nan gaba. Don yin wannan, kuna buƙatar tuna girman faɗin.
3. Inda arches zai kasance saman baka, alamar 60-65 cm alama ce. An ɗauki wannan adadi a cikin kudi na 50 cm radius da 10 cm - tsayi sama da baka.
4. Na gaba ana clipped tare da zanen filasta daidai tare da nisa na ƙofar.
5. Bayan haka, akwai wani abu wanda zai zama cibiyar Radius.
6. An ɗauka igiya tare da fensir, tsawonsa ya kamata ya zama daidai da radius. An gudanar da semicircle a wani matsayi da alama a gaba. Lokacin aiwatar da daidai gwargwado, ya kamata a juya cikakken da'irar, wanda zai zama ƙungiyar buɗewa.
7. Bayan haka, tashar tashoshin tashar ko wuka ko wulakanci ana ɗauka, wanda ya zama dole don yanke semichircle tare da layin Draw. A cikin lamarinmu, girmanta ya kamata ya zama 100 cm, kuma tsawo shine 60 cm.

Dutsen firam don baka yayi da kanka

Daga cikin tsarin kashe tsarin da ya yi amfani da shi zai dogara da kayan ado da ƙarfin tsarin.

Matakan masana'anta da shigarwa na firam ɗin yayi kama da wannan:

1. Da farko dai, a saman buɗewa, jagorar bayanin martaba yana haɗe da dowel. Bayan haka, jagororin suna haɗe zuwa bango a wurare 2.
2. Bayan haka, ana kera bayanan martaba, da aka sanya karfe. Don kera, tare da taimakon almakashi, an yanke su a cikin bayanin martaba, kowane ɗayan sannan buƙatar lanƙwasa har sai samuwar madaidaiciya kusurwa. A matsayin samfuri, zaku iya amfani da sassan da aka riga an sanya sassan daga GNLC. Bayanan martaba yana haɗe tare da taimakon dowel, kuma bushewar bushe tana tare da taimakon samfuran kai. Don baka, kuna buƙatar bayanan martaba 2.
3. Don ƙarfafa firam tsakanin 2 arcs, kuna buƙatar haɗa bangarorin rubutu.
4. Na gaba, arciate cikakkun bayanai ana haɗe su zuwa fam ɗin ta amfani da sukurori masu ɗamara kai.

Mataki na a kan batun: Ta yaya zai taimaka wajen canza bambo na ciki da zane?

Lanƙwasa zanen gado

Bayan firam zai kasance a shirye, zaku iya ci gaba zuwa mataki na ƙarshe - kwatancen kayan kafuwa. A saboda wannan, an toshe takardar rectangular na tsayin daka da fadin da aka yanka. Don daidai lissafin tsawon, kuna buƙatar tunawa game da 10-15 cm, wanda aka kara a baya. Saboda haka, tsawon ya zama a matsakaita 15 cm more.

Don haka, a cikin Bikin ba ya fasa lokacin kawai kuna buƙatar sanyaya shi da ruwa kuma kuyi huda da awanni da yawa. Bayan lokaci, zaku iya fara hawa kan takardar zuwa fam ɗin: Da farko tare da m tef, sannan sukurori.

Ya kamata a tuna cewa ya zama dole a murƙushe dunƙule lafiya, in ba haka ba kuna iya lalata takardar.

Ya rage kawai don jira cikakke bushewa na takardar - a kan matsakaita 12 hours da baka.

Fuskantar aiki

1. Da farko kuna buƙatar tafiya a duk faɗin waƙar don tafiya tare da sandpaper da gumi duk abubuwan da ake ciki. Duk da cewa ya kamata a zagaye sasanninta.
2. Dukkanin kayan aikin shigarwa ya kamata ya zama suttura tare da packy don docks. Koyaya, kafin wannan kuna buƙatar shigar da bayanan Proporored don yin motsa sasanninta.
3. Bayan haka, duk ragowar Pavy bayan bushewa an tsabtace su da sandpaper.
4. Ana amfani da Layer na ƙarshe. Wajibi ne a jira ta cikakkiyar bushewa.
5. A ƙarshen ƙungiyar, yana hana tare da putty na gama gari, kuma aka goge shi kuma.
6. Har yanzu yana tafiya a saman sandpaper na sandpaper. A wannan kayanin an shirya

Shi ke nan duk rukunin kwanon yana shirye. Ya rage kawai don ƙirƙirar kayan kwalliya. Don yin wannan, zaku iya amfani da abubuwa da yawa: fuskar bangon waya, dutse mai ado, fenti-emulsion fenti, da dai sauransu painth.