Createirƙiri wani tsinkaye na ciki, har zuwa yadda za a jaddada irin mutum da kuma bayyana shi, yana yiwuwa ta yin arches a cikin ƙofofin ƙofa. Shigina na maharba a ƙofar kofa ana aiwatar da shi ba kawai don ƙara sarari ba, haka kuma irin wannan tsari, saboda ƙirar ƙira, ta dace da yin ɗamara kowane daki.
Lissafta na ƙididdigar Jumper mai girma.
Tasirin ƙira ya sa ya yiwu a shirya buɗe buɗe a cikin bambance-bambancen daban-daban, daga siffar gargajiya ga masu rikitarwa. Don ƙayyade zaɓi na ƙofar kofar, ya zama dole a bincika kowane irin ƙira dabam.
Nau'in da fasali na arches na zamani
Maƙasu-zane suna kama da nau'in nau'in, kodayake kowane mai zanen zai iya yin sabon abu, shi duka ya dogara da fantasy nasa. Amma a aikace, har yanzu rarrabe nau'ikan arches:
Nau'ikan ƙofa.
- Tsarin gargajiya shine daidaitaccen tsari wanda aka yanka a cikin hanyar madaidaiciyar baka;
- Arch a cikin salon "zamani" - yana da wani sashi na sama;
- Romantic Style - Romangular tare da kusurwa mai zagaye na baka;
- Ellipsoid form - ARC ta Arc ne a cikin hanyar ellipse;
- Baka da aka yi a cikin sabani tsari.
Zabi nau'i na baka, la'akari da duk sigogi Dukkanin tsarin gine-ginen gine-gine da muhimmanci sosai rage girman nassi tsakanin ɗakunan.
A wannan batun, buɗewa ana bada shawarar lokacin da girman ya ba da damar sake gini. Idan budewar take, zai fi dacewa ya zama na'urar na wani samfurin ellipsoid da soyayya - da "Class" da "Classic". Da kyau, idan muka bude wani babban girma, to zaku iya nuna fantasy kuma kuna iya ƙarin haɗe da hadaddun siffofin.
Yin Arcches a ƙofar kofar
A matsayinka na mai mulkin, kafin a ci gaba da yin aikin shigarwa, kuna buƙatar shirya duk abubuwan da ake buƙata:
- Almakashi na karfe;
- Kanki da gine-ginen tare da nozzles daban-daban;
- sunada bamban fuska daban-daban;
- hacksaw don yankan bushewar;
- matakin ruwa ko bututun ruwa;
- Fensir mai sauƙi, lokaci da kuma routette.
Mataki na a kan taken: Crafts daga tsoffin jeans tare da nasu hannayensu: ra'ayoyi masu sauki da kuma bitunan mataki-mataki-mataki (38 hotuna)
Don shigarwa, za a kasance da sikirin sikirin, da kuma na'urar mai sarrafa shi.
Sutturar aminci.
Abu don baka:
- ganye plasesboard;
- Dowel;
- bayanin martaba na ƙarfe.
Abubuwan da aka shigar da kayan ƙofar da aka shigar sun bambanta sosai, amma ana amfani da nau'ikan masu zuwa a buƙata:
- MDF ganye, bukatarta shine sakamakon sauƙin shigarwa;
- Plasterboard, godiya wanda zaku iya buɗe bude kowane saiti;
- kumfa ko kumfa na faranti;
- dutse na halitta.
Kafin amfani da kowane ɗayan kayan, ya zama dole don koyan duk fa'idodi da rashin amfani daban da zurfi don koyon duk abubuwan da aka kawo.
Hanyoyi don yin artom
Kuna iya aiwatar da ƙungiyar ta hanyar amfani da ɗayan hanyoyi biyu:
- ta amfani da filasik da abubuwan ado;
- An yanke farfajiyar bangon a ƙarƙashin budewar kowane saiti.
Idan an sake yin sabuntawa, za'a iya rarraba tsohon bangare kuma a wurin sa don yin sabon filasikan filayen, tare da ƙarin abubuwa na kayan ado. Amma yana da mahimmanci a yi la'akari da cewa idan bango mai ɗaukar hoto ne, to, zai zama dole don karɓar izini akan sabon sabuntawa.
Classic Arch Shirin.
Kamar yadda aka ambata a sama, arped buɗewa za'a iya yin shi a cikin tsohuwar bango kuma ba tare da amfani da bushewa ba. Lokacin amfani da wannan hanyar, an fadada sararin samaniya, kuma an yi amfani da ciki ta hanyar ratsi da kayan a saman bango.
Kafin fara ariches, aikin shirya ya kamata a shirya. Da farko dai, tsohuwar Surcco da Putty suna doke. Sannan farfajiya tana kan bude.
Yana da mahimmanci a lura cewa ganuwar a gaban datsa yakamata a riga an shirya kuma a gama girma, tunda za'a tsara ma'aunin da ke gaba akan waɗannan jagororin.
Aikin mai zuwa kuna buƙatar ƙirƙirar aikin. A saboda wannan, ana auna shi ta hanyar budewa, musamman da tsayin bangon biyu, kuma tsayin daka an ƙaddara shi daga rufin zuwa saman kwandon. Tare da taimakon waɗannan abubuwan, zaku iya sanin radius na baka. Bayan duk lissafin, an canja baka zuwa takarda.
Mataki na a kan taken: Shugaban gado ya yi da kanka
Mafi sauki aikin shi ne ƙirƙirar tsarin bude wani tsari, sabili da haka ana aiwatar da ma'aunai kai tsaye a shafin da aka fito da bude.
Nayar da baka na PVC: Nuance
Yin busar bushewa daga PVC za a iya yi tare da hannuwansu, kuma zaka iya yin oda da hawa da dutsen da aka gama. Amma domin ya ceci kuɗi, ya fi kyau a sanya shi. Tun da irin waɗannan bangarori suna da launuka daban-daban da girma, zaku iya ɗaukar bayanan martaba da sasanninta. PVC an daidaita shi daidai da rufin ko wasu bangarori. Dutsensu yana samar da makullin musamman.
Idan akwai sigar da aka yi ta hanyar follangular siffar, toomlet ba buƙatar, zaku iya yin bayanin ƙarfe na PVC da sasanninta.
Girman shigarwa ya tashi daga dukkan samfuran.
Babban abu lokacin yin aikin shine a yanka bangarorin don samun masu girma dabam. Lokacin da kwamitin ya shirya, an rufe shi da buɗewa. Abubuwan da aka haɗe suna haɗe ne tare da taimakon sauƙin kai kuma rufe ta hanyar bayanin martaba. Ana bada shawarar wannan baka idan bangon bango yayi santsi. A yayin ganuwar matsala, ana yin amfani da baka ta amfani da akwakun. Don masana'anta, zaku iya amfani da sanduna na katako ko bayanin martaba na ƙarfe, duk yana dogara da ƙirar bango.
Yi amfani da MDF. Hakanan za'a iya amfani da bangon MDF don yin ado da bushewa. MDF yana da nisa daga 20-25 cm kuma ana iya amfani dashi azaman ɓangaren baka, kuma dangane da wannan, kwamitin zai iya yanka, kuma daga m abu don yin baka. Wannan buɗewa zai sami ra'ayi. Tabbas, wajen kera semicircle, zai zama dole don nuna daidaito don aiwatar da komai daidai. Wannan ƙirar za'a iya shigar da wannan ƙirar ta amfani da CRATS A SOMICLURE sitE.
Planterboard Arch: Shawara
Abu na yau da kullun kayan bushewa, tare da taimakonta, baka ya yi daidai da buɗewa, zaku iya yin saiti.
Mataki na a kan taken: Crafts daga Papier-Mache yi shi kanka don gida
Umurnin mai ban sha'awa arches ta fuskar bangon waya.
Tabbas, yin ficoci ba tare da cikakken bayani zai zama mafi wahala. Amma abin da mahimmancin rawar da ake wasa da shi, tunda akwai sauyawa, tunda akwai sauyawa da zai sa ya zama da wahala aiwatar da aiki.
- Mataki na farko shine shirye-shiryen da ya hada da ƙididdigewa, aikin kayan da kayan aiki.
- Bayan haka, an gina zane. Yana da tsari a kan buɗewa ko tare da taimakon bayanin martaba, tsari wanda ke haifar da girman da nau'ikan ƙungiyar.
- An fitar da kayan ado na ado. A cikin harka lokacin da aka yi firam ɗin gani, ana iya inganta shi kawai.
Shawarwari ga masu taimako
An zaɓi wurare masu ƙarfi dangane da kayan. Za'a iya hawa itace da tsarin polymeric tare da kusancin kai, amma bangarorin PVC suna buƙatar taka tsantsan yayin da aka haɗe, matsa lamba da yawa na iya ba da fasa fasa.
Itace don shigarwa kuna buƙatar ɗauka da taka tsantsan, don arches na mafi yawanci ana zaɓa da manyan nau'ikan manyan-aji - sun fi kwanciyar hankali. Ba'a ba da shawarar yin itace ba, saboda lokacin yin aiki, irin wannan kayan zai iya fasa. Koyaya, lokacin da babu komai a maimakon haka, ana amfani dashi.
A lokacin da aka haɗa PVC bangels, zai fi kyau amfani da sukurori da ƙananan diamita wanda zai iya ɗaukar ta cikin kayan, kuma ba za su cutar da shi ba. Amma lokacin amfani da PVC, ana iya hawa ta amfani da sukurori kawai bayanin martaba kawai, da kuma bangarorin da kansu an daidaita su akan safiya na musamman. Amma a wannan yanayin shima yana taka muhimmiyar rawa da rashin bangon bango.
Idan bayan da matakin sulhu ya kasance cikin tsari, bayanin martaba yana kewaye da kewaye, kuma faranti da ba za a iya sakawa a ciki ba. Amma idan an sami kasancewar cura, ana bada shawara don yin crate don wanda ya fi kyau amfani da itace - yana da jituwa don filastik.
Don haka, bayan nazarin umarnin, zamu iya yanke hukunci cewa yana da sauqi ka shigar da Arch, babban abin shine don zaɓar kayan kuma bi ka'idodin shigarwa.