Kafa hasken rana a cikin rufin filasta

Babban plaslleboard na shimfidar filasiku sune mafi kyawun sigar rufewa. Wannan fasaha shine mafi buƙata kuma an sayar dashi a kasuwar gini.

Bari mu fara cikin tsari kuma muyi magana game da fa'idodi da rashin amfanin irin wannan kayan kamar yadda plastlogboard.

Haskaka filasannin filasannin sune mafi kyawun zaɓi don yin gidanka.

Abvantbuwan amfãni na busasshen bushewa:

• abu ne mai sauki a amfani da shigarwa da hannunka;
• Zanen gado suna da cikakken santsi da santsi surface;
• Platerboard wani samfurin abokantaka ne mai jin daɗin muhalli, wanda aka rage kowane irin toxin ya rage zuwa sifili;
• Kayan yana da wuta.

Rashin daidaituwa na plasterboard:

Rufin zane tare da ƙanƙancewa.

• Kayan samfurin ne mai rauni, amma idan aiki daidai ne, ba wai abin ƙyama ne ba;
• Allasan plusterboard zai yi wahala a ɗaga idan kuna zaune sama.

Yanzu kai tsaye a kan shigarwa na rufin zanen gado na plast baki tare da baya tare da nasu hannayensu.

A waje, fasahar na iya zama mai rikitarwa da wahala, amma a zahiri yana da sauki, ko da ba kai bane kwararru a cikin wannan batun.

Mahimmancin maki shine kiyaye duk abubuwan gine-gine.

Da farko, bari mu bincika fasalin plaslerbourin rufin tare da hasken rana.

Wadannan duwatsun sun kasu kashi biyu.

1. A ceilings tare da rufe hasken rana.
2. Tushe tare da bude hasken rana.

Bari mu fara daga nau'in farko, tunda yana da wahala a zane. Me yasa?

Domin lED hasken wuta don dacewa a cikin filasen rufin, ya zama dole a shigar da shici na musamman, wanda ke tsakanin matakan rufi.

Domin lED hasken wuta don dacewa a cikin filasen rufin, ya zama dole a shigar da shici na musamman, wanda ke tsakanin matakan rufi. A wannan yanayin, hasken fitsi yana jagorantar hasken sa ba kai tsaye a cikin dakin ba, amma ga haskakawa ba kai tsaye a cikin daki ba, daga abin da, bi da, juya, radiation daga baya ya ci gaba. Godiya ga waɗannan lokutan, ana ƙirƙirar wani yanayi da baƙon abu da ƙauna. LED bayan gida yana haifar da bayyanar mai ban mamaki da mutum na ciki.

Mataki na a kan taken: Crane Crane: Sauya tsohon samfurin da shigar da sabon

Tare da zaɓi na biyu, komai ya sauƙaƙa, kamar yadda aka dakatar da fitilu ko kuma an dakatar da fitilun, ko saka a cikin rufin filasji. Abu daya. Abin da ya kamata a biya shi, shine nauyin fitilun da za'a iya amfani da shi lokacin shigar da filasannin filasannin (matsakaicin nauyi - 10 kilogiram).

Yanzu lokacin da yakamata a tattauna shi ne rashin nasara da kuma wadatar shigarwa na shigarwa na LED.

Abvantbuwan amfãni:

• mai tsada da tattalin arziƙi;
• mafi ingantaccen tushen hasken;
• Shiga mai sauƙi;
• Da ikon sarrafa iko.

Daban-daban halaye tsakanin LED Ribbons da fitilu:

LED tef shine ainihin mafita ga neman ɓoye rufaffiyar hasken wuta.

• Na waje na leds;
• Ikon leds;
• Led launi;
• Yawan sassan LED a cikin tef 1 m.
• Kasancewa ko rashin kariya ta danshi.

Don haka, koyon abubuwan da suka haɗa wa plasesboard na plastog baki tare da backtrit, zaku iya ci gaba zuwa shigarwa. Wannan aikin ya ƙunshi manyan matakai biyu:

1. Shigar da rufin.
2. Shigarwa na hasken rana.

Kuma waɗannan matakai, bi da bi, sun tabbata cikin maki cewa zamu bayyana dalla-dalla daga baya, saboda ka fara buƙatar jerin kayan aikin da kayan da za a buƙaci a cikin aikin.

Kayan aiki:

• Mai sihiri (Wutan lantarki);
• sikirin sikirin (sikirin sikeli);
• matakin;
• Bulgarian (yankan almakashi na karfe);
• Caca;
• Corantnic;
• fensir;
• Placock (ginin gini);
• wuka wuka;
• Schocker (Sandpaper);
• tsani.

Kayan aiki:

• plasletboard;
• Bayanan Jagorar Karfe;
• dakatarwa;
• Dowels;
• da kai-slonling sclup na karfe firam ƙarfe;
• Juyin kan Subs na kai don bushewa;
• Primer;
• Putty.

Shigarwa na filasan filasje tare da hannuwanku

An riga an faɗi a sama cewa bushewar kayan ɗorewa ce mai ɗorewa, don haka kasancewar farkon abin da aka haɗe za a haɗe shi kawai dole a haɗa shi ne kawai. Dutsen ya kamata ya wuce ta bushewall. Don yin wannan, an shigar da babban bayanin martaba a tsakiya, da kuma bayan haka, ana rikodin bayanan martaba na layi ɗaya a cikin mataki na 40-50 cm.

Montage Karcasa

Domin daidai kuma na dogon lokaci don shigar da rufi na busasshen bushewa tare da hannunka tare da hannuwanku, dole ne a lura da abubuwan da ke gaba:

Mataki na a kan taken: Tashi mai zagaye a cikin gida mai dakuna na zamani: hoto na kayan daki, wanda ke da ta'aziya da ta'aziyya (38 hotuna)

Shigarwa na tushe daga filasikanta dole ne a fara daga bayanin bayanin martaba, wanda aka daidaita daidai akan alamar.

1. Alama da kuma aunawa da murfin rufin nan gaba. Don yin wannan, tare da taimakon fensir, muna yin alamomi a ɓangarorin biyu. Alamar tana nufin yawan rufi za a tsallake. Na gaba, akwai murabba'i mai dari, inda duk jam'iyyun su yi daidai. Don wannan, tare da taimakon murabba'in murabba'i, mun lura da nisan zuwa gare ku, amma ya kamata ya zama iri ɗaya.
2. Shigarwa na CEILINGS DAGA CIKIN SAUKI CIKIN SAUKI DAGA CIKIN TAFIYA. An daidaita shi daidai akan alamar.
3. Shigarwa na dakatarwa a cikin bayanin martaba waɗanda aka tsara ta hanyar kai da kansu a cikin 40 cm da aka sanya daidai, to, dole ne duk kun sanya akwatin daidai, to, dole ne a sami kwalin tare da uniform da kuma iri ɗaya dole ne a sami kwaya. Bayan haka, bangare gaba daya ɓangaren ƙasa yana rufe ta hanyar bayanan martaba kuma an datse da busassun busasawa. Yana da mahimmanci cewa don ingantaccen tushe, dole ne a yanke bushewa.

Yanzu kuna buƙatar ɗora tsarin kanta, amma an shigar da wiring.

Gyara filasan tare da hannayensu tare da bayanin martaba, kuna samun ɓangaren tsaye a tsaye na firam ɗin. A kwance ƙarshen sashin an kuma zana shi.

A matakin karshe, an yi shiiche don haskaka. Don yin wannan, a mafi ƙarancin nisa a cikin 5-6 cm, gefen an sanya gefe.

Shigarwa na LED Fadace

Ana sayar da ribbons a 5 m. Ana iya haɗa su da a tsaye da kwance, godiya ga m: an daidaita shi a wurin dafaffen. Kafin shigar, bincika ko duk LEDs suna aiki da kyau, bayan wannan kawai ya fara gyara tef na LED tare da hannuwanku.

A cikin tsunduma, inda aka nuna wayoyi, ɓangaren samar da wutar lantarki aka sanya tare da nasu hannayensu, wanda za'a sarrafa shi da hankali. Haɗa toshe zuwa cibiyar sadarwa - kuma komai, ƙirar tana shirye!

Mataki na kan batun: Makaho makafi yi da kanka