An sanya plinth daga kayan masarufi daban-daban, gami da MDF. An gabatar da shi a cikin hanyar fibreboard na farantin faranti. Ana yin murhun saboda kwakwalwan kwamfuta da aka matsa a karkashin matsin lamba da zazzabi. Shigarwa na PLAth daga MDF ana sauƙaƙe tare da hannuwansu.
Plint daga MDF ba zai murƙushe ba kuma ba sa buƙatar kulawa ta musamman.
Babban hanyoyi
Samfurin a ƙarƙashin la'akari yana ƙarƙashin shigarwa a cikin ɗakuna tare da coun gama gari da yawa:
- tayal;
- Linoleum;
- Kafet.
Shigarwa na MDF Plint akan shirye-shiryen bidiyo na musamman.
Don shigar da MDF na plunkus, kayan haɗi na musamman ba za su buƙaci ba, a cikin aikin da haɗin 2 slats a cikin sasanninta aka haɗa. Saboda haka, suna bugged. Ya kamata a lura cewa ana aiwatar da shigarwa ta amfani da kayan aiki na musamman.
Ana aiwatar da wannan aikin ta hanyoyi da yawa:
- saboda squing na kai tsaye;
- da manne;
- A kan kayan aiki.
Kafin fara shigarwa na platin, kuna buƙatar matakin bangon. An yi bayani game da gaskiyar cewa MDF kayan abu ne mai rauni sosai. Amma don amfani da kayan aiki na musamman, wannan rukunin yana wakilta a cikin nau'in ƙwayar cuta. Yana taimaka wa kasan kwalin a takamaiman kusurwa, yana ba da cikakkiyar ƙwanƙwasa a tsakaninsu. Idan an yanke wannan samfurin a daidai, to sakamakon rata yana shafawa tare da taimakon teku. Ya kamata a lura cewa irin wannan aure ba zai yi aiki ba. Polinth daga MDF mai sauƙi ne fiye da itace, don haka ana iya shigar da shi cikin sauƙi.
Aikace-aikace na manne da sukurori
A plaggation zane mai zane tare da sukurori.
Hanyar mafi sauki na gyara da ATH na MDF na samar da amfani da manne ko ƙusoshin ruwa, akwati, matakin, tef, ma'auni. Wannan hanyar shine manne wannan samfurin a bango. Da farko, buše yawan adadin hanyoyin da ake so, la'akari da ƙayyadadden kusurwa. Don yanke ɓangaren da aka auna samfurin, kuna buƙatar ƙwayoyin cuta. Sannan ana amfani da manne zuwa plinth kuma ana amfani da shi zuwa farfajiyar bango. Saboda haka haɗin ya fi abin dogara, to an ba da shawarar yin amfani da manne sau 2.
Mataki na kan batun: Ka'idar Ayyukan Thermocopples
Shigarwa na plahnph a kan irin wannan fasaha yana da wasu ragi. Game da murƙushe, bango ya lalace ko jirgin sama mai glued. Tsawon lokacin irin wannan hanya yana da alaƙa da abubuwan da aka gabatar da su a saman ganuwar bangon. Idan shigar da PLTHS ana aiwatar da bangon m, sannan a ɗauki dutsen da abin dogara ne.
Wata hanyar shigar MDF PLUTHS ta ƙunshi amfani da sukurori da son kai, sikelin, step da layi. Reiki ya yi wanka da tsattsauran ra'ayi. Wajibi ne a yi la'akari da cewa slokingwararrun taɓawa suna cikin tsakiyar PLTH 50 daga juna. Don ganuwar da ba a daidaita ba, an rage wannan mai nuna alama zuwa 30 cm. Dole ne a goge farkon farkon cikin 10 cm daga gefen dogo. A mataki na ƙarshe, kuna buƙatar ɓoye abubuwan skru a ƙarƙashin iyakoki na musamman. Ana buƙatar zaɓaɓɓu cikin launi na plinth. Har zuwa wannan, ana yarda da amfani da putty an yarda. Wannan dabarar ana ɗaukar abin dogara kuma yana ba ku damar gyara kayan aikin ƙasa zuwa bango. Idan ya cancanta, ana iya rarrabe harsashin ruwa. Koyaya, ba a bada shawarar kwararru don aiwatar da irin wannan aikin ba. Rashin kyawun wannan hanyar shine mahimman hadari da kuma babban bukatun da aka gabatar ga daidaito.
Proditura tana ba ku damar aiwatar da shigarwa na layin dogo, ba tare da lalacewar plinth da ganuwar plastint da bango ba.
Kasancewar cikin tsarin tashoshi na musamman don na USB yana ba ka damar ɓoye a cikin kayan haɗin sadarwa daban-daban.
Tare da taimakon plank yi alamomin da ramuka a karkashin saukarwa za a sanya su. Da farko, downels saka a cikin ramuka. Sannan dunƙule sassan. An ba da damar kada ya zama dunƙule, amma kayan haɗin gluing. A wannan yanayin, akwai lokacin ceton.
Informationarin bayani
Don yanke mdf a ƙarƙashin kusurwa da ake so amfani da kayan aiki na musamman - stub.
Don hawa na tarko (ba tare da la'akari da zaɓin dabarun ba), ana amfani da ruwan sama mai tsayi da yawa. Ya kamata a lura cewa MDF aka kera a cikin tsawon 2.6 m. Don kafa shi, zai zama dole don gano sigogin ɗakin. An bada shawara don ƙara 2-3% zuwa sakamakon da aka samu. Wannan zai ba ku damar rama kayan lokacin datse.
Mataki na kan batun: Manyan masana'antu a kan windows da hannayensu
Sau da yawa da aka gyara wannan nau'in an gyara shi zuwa bango tare da ƙugiyoyi masu tsayi. Fādama ita ce 10-15 cm. Suna haɗe da bango ta hanyar son kai da kuma dowels, madaidaicin wanda yake daidai da 6x40 mm. A cikin kewaye ɗakin, an shigar da su da tazara na 50-60 cm. Sannan layin dogo ya matsa zuwa makullin. Domin kogin su yana amfani da sasannin filastik na waje da ciki.
Don yanke mdf, zaku iya amfani da mahaɗan ƙarfe. Irin wannan hanyar ana yin shi da ƙarancin rawar jiki, yayin da rake a cikin hanyar hutu ya rage nauyi. Wajibi ne a yi la'akari da samfurin da aka ɗora yana da babban danshi. Koyaya, ba shi da tsayayya ga tasirin ingarwa. Sabili da haka, masana ba sa bayar da shawarar hawa filayen wuri daga MDF a cikin dakin yara. A wannan yanayin, kuna buƙatar bayar da fifiko ga riks daga PVC.
Idan kuna buƙatar canza sabanin bambanci na plinth, sannan a gaban shigarwa MDF an rufe shi da fenti na launi da ake so. Don haka, gidaje na iya guje wa yin ƙarin tsari da abubuwan cin abinci. An ba shi damar yin irin wannan aikin bayan hawa da plinth. A wannan yanayin, allunan da bango suna kare fuska tare da kintinkiri na musamman. Don kammala suttura daga parquet da laminate, an bada shawara don amfani da mDF. Bawai kawai yana da bayyanar asali ba, har ma ana ɗaukar wani aiki mai mahimmanci na wannan nau'in.