Idan kuna shirin amfani da jirgi, Linoleum ko magana, don haka don waɗannan kayan, kuna buƙatar ba da abin dogaro kuma wanda za'a iya sa shi a farfajiya na kankare. Idan kun tsaya ga screed ga screed, to, wannan zai ba da damar kasafin kuɗi na jingina a cikin ɗan gajeren lokaci. Plywood zai boye kowane abu na rashin daidaituwa na kankare tushe. Wannan Play, halayyar kayan, ba shine abu bane kawai, Plywood yana da kyawawan halaye na zafi, saboda haka zai rufe bene mai kankare tare da ƙarancin rufin yanayin.
The bene na plywood ya shahara saboda sauki na shigarwa da karamin farashin kayan da ake buƙata.
Shiri na farfajiya kafin fara aiki
A kwance na plywood zane ya kamata a yi akan tushe. Wannan yana buƙatar ikon sarrafa sararin samaniya kafin fara aiki. Idan da bambance bambance bambance-bambancen ya wuce 2 mm gani, to dole ne a cika shi bugu sosai ko kuma ana sake amfani dashi kwata-kwata. Dole ne a yi kwanciya bayan kammala bushewa da mafita, wanda zai iya kusan kwanaki 45. Screed dole ne ya sami takamaiman matakin zafi, don duba wannan halayyar zuwa saman bene, ya kamata a kafa mafi girman fim ɗin shine 1x1 m, tare da kusancin abubuwa, kayan da kuke buƙata don danna abubuwa masu wahala . Bayan kwanaki 3, ana iya bincika fim ɗin don fitar ruwa a saman ciki. Idan ba a samar da Condensate ba, to zaku iya fara cire haɗin polywood da kuma mai biyo baya.
Daraja plywood.
Ana nuna zane-zane na plywood da hasara, wanda ake kira wutar lantarki. Wannan na iya haifar da kayan kayan ba koyaushe yake santsi ba. Ya kamata a yi la'akari da wannan fasalin kafin farkon kwanciya - kayan za a yanka a cikin ƙananan blanks na ƙananan ƙananan, wanda zai ba ku damar samar da bene. Zai fi kyau a rufe kayan tare da murabba'ai tare da waɗannan girma: 0.75 ko 0.6 M. Kasancewar Seams tsakanin zane-zanen gado.
A kwance plywood ya kamata ya gabace ta hanyar nazarin yanayin kayan bayan yankan.
Shafin zane bai yi lalacewa a cikin kamannin kwakwalwan kwamfuta da roka ba. Bayan yankan, za a iya saka zanen gado a gindin tushe. Yanzu zaku iya yin alamar zanen gado da ya kamata a gyara kuma a daidaita a ƙarƙashin wasu yankuna na ɗakin, waɗanda ke da 'yan kasawa, sasanninta da kuma suna. A m salo na kayan zai haifar da zane, wanda za a sanya kayan sha na ƙarshe.
Mataki na a kan batun: Matsa ƙofofin zuwa baranda: zaɓi da shigarwa
Masu girma iri na plywood.
Ya kamata a sanya tsari da tsari tare da samar da seams, nau'ikan daban-daban wanda yakamata a ba shi wani nisa. Don haka, ya kamata a zama bayi daga 0.1 zuwa 1 cm tsakanin matsayi na gaba na seams, yayin da bango na Seam, ya zama dole a ƙidaya fadin ƙarshe, wanda zai ba su damar gyara su daidai yayin aiwatar da m.
Fasali na bene
Idan kun yi tunani game da yadda za a tsaya wa phaneru, ya kamata a yi amfani da cewa ya kamata a yi amfani da shi don wannan rikice-rikice tare da ƙusa-ƙusa. A kwance filolywood ana iya samar da shi a kan tsarin tushen ruwa. A matsayina na wani bayani na musanya, gaurayawar a kan abubuwan da aka mika wuya ko kuma a kan abubuwan da aka gyara biyu zasu yi. Mutumin amintacce shine tushen tsarin ruwa. A kan aiwatar da amfani, ba ya yada ƙanshi, da kuma shirin sa ya ƙunshi amfani da tsarkakakken ruwa. Ana amfani da wannan cakuda a matsayin na ƙarshe. Koyaya, wajibi ne don yin la'akari da cewa amfani da irin wannan abun da ke nuna bushewa ne. Idan ka yanke shawarar ka manne wa maigia, wanda ya dogara ne da sauran ƙarfi, to don samar da ƙarin impregnation na scregned na farkon. Bugu da kari, za a tare da wani wari mara kyau mara dadi. Amma zai bushe matsakaicin matsakaicin tsawon kwanaki 5.
Plywood kwanciya zane akan screed.
Idan an gudanar da kwanciya na flywood ya kamata a aiwatar da shi a cikin ɗan gajeren lokaci, ana bada shawara don amfani da manne-kayan aiki biyu. Kuma bayan sa'o'i 24, zaku iya ci gaba da nika saman tushe. A wasu halaye, wannan abun da ke ciki a cikin tandem tare da epoxy preper na isasshe ne don amfani dashi a kan tushen kankare, wanda ba shi da lokacin bushewa.
Manyan manne guda biyu, da bambanci da abubuwan da aka kirkira-da ruwa ko sauran ƙarfi, ba ya nuna ƙarin ƙusa na ƙusa.
Tsarin kwanciya shi ne fin so don samar da amfani da abubuwan da aka sanya kayan masarufi na Arhelite da UZin Brands.
Kayan aiki da kayan dole don aiki:
- ya bude spatula;
- Mai roller mai nauyi;
- manne;
- Dowel-kusoshi;
- flywood;
- Takardar za a yi shi
Ana amfani da spatula mai toothed don amfani da manne.
Wasu majitta an gyara su zuwa Fenneur zuwa ga screed, pre-ba farkon tushe. Koyaya, ba lallai ba ne don danganta da irin wannan tsari, tunda na farko yana da ikon kawar da ko da mafi ƙarancin ƙuraje, ƙananan halaye na zamani amfani. Bugu da kari, da farko zai iya hana zafi mai yawa.
Mataki na a kan batun: Becis a kan rufin yayi da kanka ka da kanka: katako, polyurethane, bushewar bushewa
A kwance filolywood nan da nan bayan an gama aiwatar da tsarin da aka tsara tushen kankare.
Yana kwance plywood zanen gado
Nisa tsakanin zanen plywood kada ya wuce 0.4 mm.
Kafin manne wa abin da ke cikin ƙasa, ya zama dole a fara alamar wurin da ramuka a gindin gindi mai dacewa da alamar, wanda za'a yi a kan blanks na flywood. Bayan haka, a cikin kankare, kuna buƙatar samar da ramuka a kan salama. Yanzu zaku iya ci gaba zuwa amfani da manne a kan tushe mai kankare, wanda ya zama dole don amfani da spatula mai toothed spatula. A kan Layer na kayan haɗin da kuke buƙata don saka takarda na plywood, kuma bayan hawa kan takardar tare da mai nauyi mai nauyi. Ya kamata zane ya danganta ta hanyar zane-zane da kuma dowels. Yakamata a shafa iri ɗaya don sanya duk zanen gado na polywood.
Ya kamata 'paneur a kan Layer na abun da ke ciki, kauri wanda ya kamata ya bambanta a cikin kewayon daga 2 zuwa 3 mm.
Dole ne kayan ya fadi don ɗaure cikin sauri, yana juyawa daga gefen zane don 2 cm, yayin da mataki kuke buƙatar daidai da resan na 15-20 cm. A cikin ƙirar kuna buƙatar gungurawa resanyaya, diamita na wanne Zai zama kamar yadda masu taimako za a iya nutsar da su a cikin jikin hat ɗin.
Mashaya na ƙarshe
Fannetru bayan kwanciya dole ne a tashe shi, saboda wannan ya kamata ka yi amfani da injin nika na musamman wanda ke da tsananin tasirin. Bayan wannan tsari, plywood ya kamata ya zama daidai da santsi. Ya kamata a hana ƙasa daga cikin kurakurai, wanda a wasu lokuta na iya bayyana a cikin abin hawa. A laying plywood ba koyaushe yana ba da damar samun farfajiya ba tare da saukad da tsaunuka tsakanin zanen gado ba, waɗannan matsalolin suma suna ba da damar warware nika.Muguwar sa na filayen plywood za a iya bincika tare da taimakon jirgin ƙasa, tsawon wanda yake 2 m. Bayan sauke mulki a saman farfajiya, zai yuwu a ƙayyade ko akwai yiwuwar saukad da. Idan tsakanin bene da ƙananan kayan aikin da aka gani ya wuce 2 mm, an yi aikin da talauci. Kuma idan gibin a cikin al'ada, to zaku iya fara kwanciya da aka gama a kan ginin ginin.
Shawarwarin akan Lamunin Lamunin Polywood
Za'a iya dage farawa a kan taye, wanda aka nuna ta hanyar raguwa FC. A cikin abun da ke ciki, katako mai aikin itace, wanda gluits abun da ke kan resin, bai kamata a cikin su ba. Irin wannan fure ana amfani dashi sosai a cikin sararin wuraren zama. A kwance polywood na nau'in da ba'a so (NSH) yana samar da buƙatar nika bayan an kammala shigarwa. Za'a iya dage farawa a kan screed, wanda aka goge kawai a gefe ɗaya. An ba da shawarar shigar da fanken plywood, da kauri wanda yake a cikin kewayon 1.2-1.5.5 cm.
Mataki na a kan taken: Haske shawa - don ƙara rigakafi da kyau fata!
Za a sanya zanen gado a kan screed dole a sanya shi tare da wasu ƙaura, guje wa yin rijiyoyin suttura huɗu a wuri guda. The Exped kafin kwanciya wani dala dattara ya kamata a tsabtace daga ƙurar gine-ginen gini, wanda ya bayyana bayan aiwatar da Putty, zanen da sauran ayyuka. Gyara ƙura daga tushe yafi dacewa ta hanyar tsabtace masana'antu.
Abubuwan da ke faruwa ko kayan tarihi a kan screed ya kamata a shafa tare da goga ko morler. Zuwa ga taye, kuna buƙatar ƙarfafa samari na phaneur, tsawon abin da ya fi kauri daga cikin ginin sau 3. Sanya masu sauri lokacin da gyaran plywood zuwa ga screed bukata ba kawai kusa da kewaye da zane ba, amma kuma diagonally.
Za'a iya dage farawa a kan screed, wanda zai iya aiwatar da polyethylene, Pergamine ko analogus na waɗannan kayan. Ya halatta a saka bakin polyethylene substrate a karkashin laminate a kan screed. Kudinsa ba shi da yawa kuma ya bambanta daga 15 rubles a cikin 1 M2, da kuma rufin thermal wannan kayan yana ba da kyau.
Kafin kwanciya plywood akan tayewar zane, ya zama dole don rufe mai cikin hanyoyi da yawa, mafi ƙarancin yadudduka 2. A lokaci guda, yakamata a biya ta musamman da ta ƙare. Don haka ana sarrafa zanen gado ba zai lalace ba.
Bayan an karfafa plywood ga screed, yana da kyau barin shi don bushewa, yana da kyau, yana da kyawawa, dole ne a yi shi da kayan ruwa. A kan irin wannan cake cikakke kwance fitar da piston shafi.
Ba a cikin dukkan lokuta, rigid da sauri na plywood zuwa ga screed ya dace. Ba lallai ba ne a yanka m zane mai ƙarfi akan ƙananan zanen gado, wanda ya ƙi yarda da harabar gidajen birane, yankin ba mai girma bane. Wannan kawai zai kara yiwuwar aiki.
Idan bayan sanya zane a kansu an shirya shi a makale mai taushi mai kwasfa, ana bada shawarar seams don cika tare da sealant. Filamacinta ba zai zama abin hana yatsa ba, ba za a ba da shawarar seam.
Plywood na iya zama kyakkyawan bayani idan ya cancanta, a cikin ɗan gajeren lokaci zuwa matakin kankare wuri surface surface a cigaba da cigaba da cigaba shafi. Irin waɗannan ayyukan ba marasa aikin yi ne ba, har ma ba zai haifar da manyan jarin kuɗi ba. Kuma har ma da Jagora wanda bashi da gogewa a wannan yankin zai iya daidaita fassarar da aka bayyana a sama.