Pyclone don faranti da fasahar osb da fasaha na amfani

Zuwa yau, farantin OSB suna samun ƙarin shahara a gini. Irin wannan kayan halitta ne, sabili da haka yana buƙatar babban kariya cewa ana bayar da shi.

Putty don OSB Plate

Saboda haka, a cikin labarinmu, zamu gaya maka yadda fasaharta ta kare ta zama kamar, kuma waɗanne abubuwa za a iya amfani da su don kare irin waɗannan hanyoyin.

Yarda da farantin OSB tare da wasu kayan

Kammala faranti Putty

OSB Plate - abu wanda ya kunshi sahun yadudduka, wanda ke samarwa daga kwakwalwan itace, wanda, a karkashin babban matsa lamba da zazzabi, manne da rudani rudani. Kowane ɗan ƙaramin abu ne wanda aka bambanta ta fuskoki daban-daban, wanda ke kare murƙushe daga lalata.

Tunda faranti ya ƙunshi kayan itace, an rarrabe su da babban matakin danshi-danshi suna iya mamakin fenti mai ban sha'awa, saboda suna da ruwa-watsawa-watsawa da ruwa za a iya amfani da fannoni masu watsawa, saboda suna iya zama Too cretaturd da farantin farantin, yana haifar da kumburi da nakasa.

A wannan yanayin, yana da mahimmanci a lura cewa masana'antun faranti sun kula da abokan cinikinsu da haɓaka faranti tare da digiri daban-daban na juriya ga danshi. Mafi dorewa OSP-3 kuma yi amfani da su don aikin waje ko kayan aikin zama tare da babban matakai.

A cikin alamomi na zahiri da na inji, kayan ɗakunan dakuna dole ne su sami fasalulluka waɗanda aka nuna a cikin tebur.

Tabo bango

Sunan mai nuna alama	Darajar da aka tsara (mm)
5-10	11	20-25	26-34.	350
Iyakar ƙarfin ƙarfin babban axis (MPA)	24.	22.	ashirin	goma sha takwas	goma sha shida
Iyakar ƙarfin ƙarfi a cikin sakandare (MPA)	10	tara	takwas	7.	6.
Module na elalation tare da tanadi akan babban axis (MPA)	3600.
Module na elalation tare da lanƙwasa a axis (MPA)	1700.
Lokaci mai ƙarfi yayin shimfiɗa (MPA)	0.36.	0.34.	0.32.	0,3.	0.28.
Skuffing cikin kauri a kowace rana	goma sha takwas

Mataki na kan batun: Bukatun don Jirgin Ruwa a Gidan Masu zaman kansa

Putty don bango daga faranti na OSB

Amsa tambaya ko irin waɗannan kayan, amsar ita ce rashin daidaituwa - babban abu ba don shigar da abubuwan da aka ruwa ba, don kada ku danna saman rushewar ƙazanta, ko kayan tare da karuwar danshi juriya.

Yadda za a zabi putty?

Kayan ado na bango

A lokacin zabar asalin kayan gama, ya zama dole, da farko dai, don kula da wadanda abubuwan da za a iya amfani da su don aiki a kan mayafin katako kuma ana rarrabe su da hadadden su.

Mafi dacewa yana nufin don sarrafa faranti OSB:

• acrylic-tushen plty, wanda ya shahara da ayyukan guntu-itace;
• Nitro-spacure dangane da resin da kuma mahimman sel celulose tare da ƙari na filol fillers (wani lokacin irin waɗannan abubuwan da ake ciki dole ne a diluted tare da ci gaba da daidaito da daidaito);
• Wanda aka samar da shi a cikin Ofifa, varisa da manne, da kauri da kuma inganta kayan kwalliya (irin cakuda an dillalatar da Olifion).

Wanke farantin OSB

Duk da cewa an yi shi, don aiki tare da OSB, dole ne ya sami waɗannan fasalun:

• babban matakin m tare da tushe mai laushi;
• Babban ƙarfi na shafi, warware saman slabs ta hanyar kayan ado na gaba;
• Hoto na daidaituwa (a cikin abun da ke ciki bai zama masu ƙira masu kyau waɗanda zasu iya ƙunsar bayyanar fasa ba).

Fasaha na amfani da Putty

Wanke bangon OSB

Idan an sayo duk abubuwan da suka wajaba, zaku iya ci gaba da amfani da mafita.

Bambanci shine, kafin amfani da wanda ado mai ado zaka iya sarrafa faranti - a'a, ana aiwatar da aikin ta hanyar tsari guda ɗaya:

1. An rufe farfajiya tare da bayani na farko, wanda ya mallaki kaddarorin da ba a san shi ba kuma yana haifar da fim mai ganuwa a kan tanti da sauran abubuwa masu tasirin da suke da wadatar itace a itace);
2. Na gaba, yana yiwuwa ya bushe kadan kuma yana ba da damar saman bushe (hutu na iya wuce awa 4-12);
3. Yanzu zaku iya ci gaba zuwa amfani da taro mai ban sha'awa, amma lura cewa ya kamata a yi irin wannan aikin kawai a cikin lokacin dumi da zafin jiki ba fiye da 60%;
4. Yanzu ya zama dole don shirya hutu na biyu kuma suna ba da cakuda amfani da amfani;
5. A mataki na gaba na aikin, da aka sarrafa da aka aiwatar yana grinning don cire lalacewa mara amfani kuma ku sanya ƙirar smoother;
6. Sannan ana buƙatar haɓaka (don wannan fliesline yana sanye da shinge, amma saboda haka babu wani yankuna mai yawa a wurin kayan aiki, cire abu mai yawa, da kuma tuntuɓar abu na Canvas an matsa wa gidajen abinci zuwa ga haɗin gwiwa).

Mataki na a kan taken: Nau'in gilashin loggia da baranda

Putty OSB

Kamar yadda kake gani, babu wani abu mai wahala a cikin wannan tsari, har ma da sabon shiga zai iya jimrewa a kan nasu. Amma, da rashin alheri, wannan kayan yana da ɗaukar hoto cewa ka'idar ɗaya ba zai isa ba kuma dole ne a tuntuɓar ayyukan ƙwararru.