Mataki-mataki-mataki shigarwa na kwandishan tare da hannuwanka (hotuna 17)
Idan zafi ya kai muku hari, zan nuna maka kuma ka fada wa hotuna, yadda ake sanya kwandishan na sama).
1. Da farko an haɗe farantin kan bango. An yi saurin shiga cikin sharuɗɗan da aka rataye shi a kwance a kwance. Idan ba a zubar da ciki ba, wanda aka kirkira a cikin toshe ba za a zuba a kan titi ta hanyar canjin magudanar ruwa ba kuma zai yaudari ku duka bangon.
2. Alama a karkashin rami a bango. Jaka na kwandishan an kafa dan kadan a ƙasa, don kada ku murkushe bango lokacin da ake yin hako.
3. An shirya wani rami don hakowa kuma a yanka fuskar bangon waya, don haka lokacin da ake hana su ba ya cutar da su.
4. Ramin ya lalace ta hanyar babban mai sarrafa shi. A wannan yanayin, kwandishan ya karami, saboda haka, sai a zubar da diamita na bromie na 34mm. Karancin aiki da mafi kyau. A wasu lokuta, heting wani bromide tare da diamita na 55mm.
5. Kamar yadda kake gani, bayan hako a babu datti da yawa da ƙura, kuma ganuwar suna da tsabta.
6. An sanya brackets kuma an sanya su a ƙarƙashin waje.
7. An shirya waƙar bulo: bututun ƙarfe guda biyu na diamita mai dacewa suna sanye a cikin zafi na musamman da danshi wanda ake kira da thermoflex. A cikin katako, akwai kebul na haɗi na haɗi na linzamin kwamfuta don watsa wutar lantarki daga cikin sigina daga ɓangaren cikin gida zuwa waje. An sanya waƙar a teflon tef don sauƙi wucewa ta rami a bango, kuma a cikin ƙarancin lalacewa daga yanayin yanayi.
8. Balakawa.
9. An sanya shingen waje a kan bracks kuma an ɗaure shi da ƙwallon ƙafa 4 zuwa 13 tare da kwayoyi da wanki.
10. Yayin da mutum ya girgiza toshe, na biyu ya farka da rufaffiyar waƙa a cikin rami da kuma gunduma don haɗawa zuwa waje.
11. Duk abin da ake buƙata ana haɗa shi da haɗin waje.
12. Mun ci gaba zuwa toshe na ciki: Haɗa bututun ƙarfe zuwa toshe, a haɗa tube bututun mai tare da bango don fitarwa daga magudanar ruwa daga rukunin cikin gida. Haɗa kebul na Inter-toshe daga waje zuwa ƙarshen. toshe.
Mataki na a kan Topic: Gidaje na waje da fitilun fitila suna aikata kanka da kanka a cikin salo daya
13. Lokacin da katangar ke haɗa ta da tubes na tagulla, ci gaba da fitar da kwalin. An yi shi ne don gwada karfin da kuma cire danshi daga kwalin ciki, kamar yadda danshi ya shafi sassa na ciki na kwandishan, da kuma naɗaɗɗa da mai da mai sun ƙunshi a cikin toshe. An haɗa mai mai tara matsin lamba ta hanyar ƙarshen famfo, ɗayan kuma ƙarshen tashar sabis akan ɓangaren waje na kwandishan. Kuna buƙatar fitar da mits 10-20 a bushe yanayin.
14. Fitar da injin kansa. Tabbas biyu-mataki))
15. Haɗin haɗin gwiwa da shirye-damar amfani da yankin waje na kwandishan.
16. A fatawar abokin ciniki, ana saka wata lattice na musamman da aka sa a waje.
17. An sanya rukunin gida kuma a shirye don aiki.
