Tattara shinge na matakala, ya zama dole don yanke shawarar yadda za a sanya bolusters, racks, ginshiƙan tallafi. Duk abin da ba sauki bane, saboda shigarwa na Balasine ya danganta da nau'in matakala, kayan daga abin da aka yi karkarar da kanta. A lokaci guda, ana yin amfani da mafi kyawun abubuwan da aka zaɓi na yau da kullun.
Yawan Balyasin da tallafi na tallafi
Da farko dai, ya wajaba a yanke shawara kan waccan Balaasine ɗaya zai kasance a mataki ko biyu. Yarda biyu za optionsu. Batu na biyu: Wajibi ne a yanke shawara a ina kuma tare da abin da mitar za ta kasance ginshiƙan tallafi. Akwai zaɓuɓɓuka da yawa:
- A mafari da a ƙarshen lokacin.
- Ta hanyar mataki.
Mafi sau da yawa, ginshiƙan tunani suna a farkon kuma a ƙarshen matakalar
- Matakai biyu.
- Matakai uku.
Babban adadin ginshiƙai a kan matakala suna da mahimmanci idan bolayet ɗin suna da bakin ciki ko cikakku - ba a tsaye ba, amma ayyukan kariya da / ko kayan aikin kariya.
Sanya alamar alama ga ginshiƙan da bassine
A kowane hali, duk ginshiƙai da bolasters a kan span ya kamata tsaya a kan layi madaidaiciya. Haka kuma, idan radius / girman da Balaasine / Tallafin Tallafi ya bambanta, ana saita su a kan layi ɗaya na cibiyoyin su. Bayan shigar da duk Balaasine da dogayen sanda, idan kun duba layin, dukkansu dole ne su kasance cikin jirgin guda.
Farko mataki na shigiyar na faɗakarwa - safar wuraren shigarwa na shafi da balyasin
A wace nisa daga gefen matakin don samun Balasins
A matsakaita, an sanya cibiyar Balian a nesa na 6-10 cm daga gefen, amma kuma iya samun gefen. Zabi kamar yadda kuke so. Amma ya zama dole don zaɓar wannan nisan don ƙayyade wurin da zai zama dole a yi ramuka don shigarwa na balyasin.
Don sanin nisan da akwai algorithm. Yawanci ci gaba daga gaskiyar cewa matakala ko Balassine dole ne ya kasance a nesa na 2-5 cm daga gefen matakin. Girman ginshiƙi ko mashaya ya kasu kashi biyu, ƙara nesa da aka zaɓa zuwa gefen kuma muna samun darajar da ake so.
Nisan daga gefen matakin an zaba shi ba shi da cikakken
Bari mu ba da misali, lissafa wurin shigarwa na Baluster. Bari su sami square giciye a ƙasa, 80 * 80 mm. Daga gefen mataki, dole ne a riƙe su 3 cm. Jimlar da muke samu: 8 cm / 2 cm 3 cm 3 cm 3 cm 7 cm. Wancan ne lokacin da wurin da aka yi amfani da ballosting a kan matakala Zai zama dole a jinkantar da 7 cm. Hakanan shigar idan bolasters 7 cm, daga gefen - 3 cm, daga wannan yanayin, rami don hawa Stair Balaasine an yi shi a nesa na 6.5 cm daga gefen matakin.
ALGORITHM TAFIYA BALYASIN
Tsarin alamomin ba'yasin mataki-mataki za a iya bayyana kamar haka:
- A kan babba da ƙananan mataki daga gefen mataki, ayyana wani nesa, wanda ya dogara da girman poles / Balasine.
- Tsakanin dige ciyar kai tsaye. Kuna iya yi:
- Samun kwarkwata a cikin ƙusoshin ƙusoshin ƙusa / ƙwayoyin hannu na kai, suna ɗaure zaren a tsakãninsu.
- nuna layi akan matakin lers;
- Bayan an sanya shi koda da mashaya / Jagora.
Balaasins za a iya shigar daya ko biyu a kan mataki. Akwai kuma zabin - biyu a ɗaya, ɗaya a gaba, a gaba, a kan mataki na uku sake biyu da sauransu, don haka a, sau biyu
- A matakai sun yi haƙuri da kai tsaye. Ya fi dacewa kuyi wannan tare da babban carbon da fensir. A kowane mataki, ya zama akwai layi wanda zamu nuna cibiyoyin da za mu nuna cibiyoyin da Balasine.
- Yanzu ya zama dole a saka inda aka sanya matakai. Tabbatar ka tsaya a saman da kasan na span. Na farko sanya ginshiƙai don tsani a ƙasa da kuma a saman span. Sannan, wurin da bolusters zai tsaya. Kalli cewa nisan tsakanin su iri ɗaya ne ko kusan iri ɗaya ne. Bambancin izini shine 1 cm (alal misali, tsakanin duk balusersers, 9 cm samu ne, kuma tsakanin post ɗaya da Balassine - 8 cm) 8 cm) 8 cm).
Babban aikin wannan matakin shine canja wurin kai tsaye ga matakan da daidai. Na biyu shine zaɓar wannan nisa tsakanin ginshiƙan da kuma balusters saboda babu wani sanannun ido na bambance-bambance. Idan ba shi yiwuwa a yi komai daidai, zaku iya yin symmetrically - manyan ko ƙarami ko karami na nesa kusa da gefuna ko biyu. Babu wani mafita na duniya, tunda kowane matakala na musamman ne, tare da sigogi da fasali.
Hanyar don Haɗe Peril
Domin shigarwa na layin dogo a kan matakala, ba tare da abubuwan mamaki ba, ya zama dole a fili wakiltar gaba daya.
- Cire matsanancin nauyi biyu - a saman da kasan span. An nuna su saboda haka daga gefen ginshiƙi zuwa gefen matakin shine nisa (yawanci 3-6 cm). Idan matakalin an yi shi a kan koro, suna saita su ta hanyar haɗawa da gefuna, ko bayan kasancewa tare da nisa ɗaya daga ɓangarorin biyu.
- Taggawa da igiya tsakanin ginshiƙai biyu da aka ɗora. An goge sawun kai kai a cikin tsakiyar su, da igiyoyi sun yi hargitsi, gwargwadon abin da zai zama dole don saita wuraren, da poles zai yiwu a kalli tsawo, da sauransu. Madadin igiya, zaka iya shigar da jagora idan kun tabbata cewa ba ya ceta a ko'ina.
Umurnin taro na jirgin saman matalauta ya ƙunshi ayyuka a jere
- Blaasins an lazimta, ana saka ginshiƙai akan ginshiƙan data kasance. Matsayinsu yana da tsananin tsayayye kuma saboda saman zai kasance cikin zaren / Jagorar.
- Lokacin shigar da kowane abu, an zaɓi matsayinta:
- Poles / Balasins ya kamata ya tsaya sosai a tsaye, ba tare da 'yar karkatarwa ba. Wajibi ne a bincika jiragen sama biyu.
- Yakamata su kasance a kan layi daya tare da an riga an riga an riga an riga an riga an riga an riga an riga an riga an yi tafiya "zuwa hagu.
- A kan posts an saka a kan faɗakarwa (tare da mai submeritator ko ba tare da - ya dogara da sha'awarku ba.
Na gaba, ana maimaita tsari na na biyu. Range fiye da shigarwa na ƙarshen ƙarshen shine haɗuwa da ginshiƙan tallafi a ƙarshen juyawa. Wani takamaiman hanyar ya dogara da nau'in da kayan aikin hannu, amma ya zama dole dole ne a iya sa shi don wannan rukunin yanar gizon ya zama mai juyawa daga wani, yayin da ya dace kuma bai gaji ba.
Kayayyakin Balasine da ginshiƙai
Mutane da yawa sun yarda cewa shigarwa na faɗakarwar yana da wahala fiye da kera a zahiri: nodes daban-daban daban-daban, babu wasu daidaitattun hanyoyin da suka dace da duka. Wannan shine mai rikitarwa. Wataƙila mafi wahalar sanya doguwar katako. Abubuwan filastik ne, amma kuma matsaloli: abu mai kyau da aka gyara da farko, a cikin shekara guda ko biyu na iya rataye tare da amplitude mai kyau. Sabili da haka, ga abin da aka makala na dogayen sanda da Balaasine daga itacen yana da kyau sosai, da kuma reinsured, yin amfani da Hanyoyin Hanyoyi, ƙara manne idan zai yiwu. Don haka mahaɗin suna tougher.
Ba mafi kyawun shigarwa na katako na itace a kan dutse ba ko madaidaiciyar matakai, amma abin dogara
Gabaɗaya, katange ko ginshiƙi an daidaita ko dai zuwa allon na mataki, ko ga koosero - ya dogara da ƙirar matakala. Matakoki na ciki akan Cosomra yi abubuwa da yawa, saboda, galilin, zamuyi magana game da shigarwa na faɗuwar zuwa matakai.
Tare da taimakon wani jirgin sama (Muchariar) zuwa mataki
Akwai zaɓi mai sauƙi - ta hanyar saurin Balaasine da ginshiƙan tallafi zuwa mataki. Abinda kawai buƙata: kauri daga matakin ya zama mai kyau - fiye da 40 mm.
A wannan yanayin, don shigarwa na Baluster ko ginshiƙai a cikin zaba, ta hanyar ta hanyar da aka yi tare da diamita na akalla 8-10 mm (yana yiwuwa 12 da 14 mm ya dogara da da Balasine Cross sittin). Mafi karancin shohahar tsawon shine 80 mm (sauran sauran za a iya yayyafa shi). A karkashin bolt droms wani rami na diamita mafi girma. Bayan shigarwa, dole ne a sake shi don haka gefen kwamitin ya kasance akalla 5 mm. An rufe rami mai zurfi tare da layin kayan ado (zaku iya zabar launi da ya dace da launi mai dacewa ko sanya shi daga itace).
Shigar da Blaasine na itace: Freak ta hanyar zuwa mataki
Ana saka bolt a cikin rami, rami a tsakiyar shine ya yi gawar ta 2-3 mm ƙaramin diamita fiye da diamita na bolt. Takamaiman diamita ya dogara da itace iri-iri: itace mai wuya, ƙarancin bambanci tsakanin rawar soja da ƙamshi ya kamata. Zurfin buɗewa yana daidai da tsawon ƙarar.
An goge baƙin ƙarfe daga ƙasa, ya wuce ta hanyar, shiga jikin Baluster. An duba shi a zaren, nunin. A ƙarshe ja baki daga ƙasa ta amfani da maɓallin ƙarshen na diamita da ake so. Zabi yana da kyau a cikin wannan, a cikin ka'idar, za'a iya tsallaka haɗi - idan kun cire filogi da, ta amfani da maɓallin, rage barcin. Amma "mai dakatar" aiki har sai ramin da ke cikin itace ya zama da yawa daga baya. Kuma ya (koma baya) zai bayyana ba da jimawa ba - daga lodi da aka gabatar a cikin daban-daban kuma, daga matakai na halitta da ke faruwa a cikin itace. Don haka haɗin ba madawwami bane.
A zane ko zare shela
Idan ba shi yiwuwa a samu daga ƙasa, akwai wani zaɓi don ɗaukar balasine zuwa Wanes (50 * 10, 60 * 12, 70 * 16 mm). Wankings zabi babba, babba diamita. Shigar da balosinine a wannan yanayin shine: rami a cikin zurfin daidai yake da rabin tsawon ƙura. Na biyu shine rami rami a kasan balloster. Diamita na rawar soja shine 1-2 mm kasa da diamita na dummy.
Shigarwa na faɗakarwa daga itace a kan kankara
Epoxy manne a cikin ramuka biyu, an saka wanning a cikin rami a cikin matakin har sai ya tsaya, to, an sa bouster a kai. Don mafi girman amincin wannan hawa tare da manne, zaku iya kunsa ƙananan ɓangaren balleter.
Lokaci guda: Neman tsari daga wannan itace daga abin da matakai da kuma ragi. Suna da madaidaicin yaduwar yanayin sararin samaniya guda ɗaya, da daidai mayar da halaka, ƙara zafi. Wannan zai sanya mahaɗin haɗi. Shigarwa na mashalas a kan dinki - gargajiya, amma ba mafi ingantaccen hanyar yau ba. Da fari dai, ƙofofin na iya karyewa, abu na biyu, haɗin da kanta har yanzu ana yin karyaci. Don haka a cikin 'yan shekaru dole ne ka nemi hanyar da za a gyara hanyar hira.
Maimakon sucker, zaku iya amfani da fil mai ƙaware. Tsarin shigar da Balaasine ba ta daban ba. Duk iri ɗaya ne, kawai na iya zama manne ba tare da zuba rami ba, kodayake ...
A kan kai tsaye
Mafi "gama gari" hanya, wacce ba ta da matukar muhimmanci ga kwararru, amma ita ce mafi sauƙaƙa fahimta da aiwatarwa - shigar da balluster akan dunƙulewar kai. Don sauri zuwa matakai, kaset na itace tare da diamita na akalla 6 mm da tsawon 60 mm. A kowane gefe, sun sa biyu (duka, ga kowane nau'i 8.
Mafi sauki kuma mafi "kuskuren". Kuma kuma: matsaloli da yawa don rufe abubuwan da ba a sani ba
Wajibi ne a karkatar da su da rabin kusurwa na 30-40 °, a karkashin huluna don cikar ramuka. Shigar da sukurori, to an rufe ramuka tare da toshe daga itacen guda ko girgiza da putty akan bishiya.
Tare da zipbolt (zipballt)
In mun gwada da sabon sauri, wanda za'a iya gyara shi zuwa matakai, da kuma hannaye. Ya dace don amfani, amma yana da tsada. Idan ka shigar da takaici tare da hannun ka da kuma "don kanka", wannan zabin ne mai kyau. Sanya Balashne tare da zipball yana da kyau tun lokacin da haɗin zai iya zama daga baya ta cire koma baya ta cire baya.
Zipballt ya ƙunshi bugun fenarie da kuma kayan maye. Akwai nau'ikan guda biyu:
- na biyun fannoni biyu yana da alaƙa da streaded stures na kusan tsayi;
- Daga wani yanki mai lamba (nau'in 13.600).
Balaki tare da haɗin haɗin gwiwa tare da haɗin haɗin wurare masu kyau yana da kyau yayin haɗa balusne da dogo, faɗla tare da ginshiƙai na tallafi. Direct zip yana da kyau don haɗin ɓoye na sanduna. Kawai batun shigarwa na balleter a kan matakai, ginshiƙan tallafi a ƙasa, rufe bene na biyu. Girman wannan mringener suna da ƙarfi - diamita na 8 mm, tsawon shine 96 mm, domin nasarar da aka makala ta hanyar ba ta da shakka.
Na'urar zipbolt don haɗin sassan
Algorithm da kanta yayi kama da hawa akan diddige: yana da Dole a yi rawar soja a mataki da bantuster rami don shigarwa na bindiga mai bindiga. Tsawon budewar a cikin sassan duka ya zama daidai da tsawon diddige, minus tsawo na kai.
Bambancin shine ana buƙatar rami na fasaha don shigar da kai dain zuwa babba. A girma, ya kamata ya zama kadan mafi girma na diamita na kai, kuma cibiyar sa dole ne ta dace da axis na rami a karkashin diddige. Bayan an shigar da injin, an shigar da greepbox a cikin rami na fasaha. Yana da ramummuka na musamman akan maɓallin. Shigar da kai don haka ana samun ramuka. Tare da taimakon maɓallin HEX na 6 mm, wanda aka saka cikin waɗannan rumbun, shugaban da ya tsaya, ƙarfafa baluscin zuwa da gyara diddige.
Lokacin shigar da ginshiƙan tunani na faɗakarwa a ƙasa tare da zip-bolt, tambayoyi na iya tashi bisa ga hanyar sauri. Idan bene ne katako, sashin da aka yiwa alama ne kawai. Idan bene ya kankare, zaku iya amfani da Anchor na sunadarai. Idan akwai layin gidajen ƙarfe, za a iya ba da kafara. Hanya ta ƙarshe, ta hanyar, mafi abin dogara: duk da cewa ƙarar ba za ta sake zama ba.
Haɗin "na ƙarshe wutsiya"
Wata hanyar hada bolusters da matakai shine joine. Tare da taimakon tsagi da karye na musamman siffar - wutsiya hadiye. Wannan zabin yana yiwuwa idan kun yi bammafi da kanka ko suna da madaidaicin hannun jari a ƙasa.
An shirya shigarwa iri ɗaya daga cikin Balasin mai yiwuwa ne idan an shirya wutar da za a yi kusan daga ƙarshen matakan. Sa'an nan kuma ramuka a cikin hanyar trapezium an yanka cikin matakan daga ƙarshen, iri ɗaya ne akan bolusters. Thearshen yankan an sa shi tare da haɗa manne ko guduro, haɗe da gyarawa.
A lokacin da aka haɗa da "haɗiye wutsiya", za ku iya ƙarfafa mahimmancin balluster da matakai
Tare da wannan hanyar fili, racks na ɗan lokaci - kafin bushewa manne - yana da mahimmanci don gyara a cikin wani mataki na tsaye, saboda za su iya karkata. Don yin wannan, gina tsarin goyon baya na ɗan lokaci wanda ya fahimci manne ta manne.
Don yin matakan a gefe yana da kyau, an rufe ƙarshen wutar tare da filayen ado na ado. Wonks na iya zama "dasa" a kan manne, ƙusoshi, scarfin kai na kai, ducks. Zaɓin ya zaɓi cikakken cikakken tsari, amma mafi daidai kuma ba tare da kuma ba da izini ba shine kayan sanduna. An kafa makamancin shigarwar Balasin gaba ɗaya akan zane-zane na sassaƙa, yana buƙatar cikakken yarda da girma dabam.
Shigarwa na balyasin a kosur (koyarwa)
Lokacin shigar da Balaasine a gidan wasan kwaikwayo ko Kosur, zaku iya amfani da duk hanyoyin shigar da Balasine: a kujerun, bincike, zipball, sukurori, zipball. Hakanan zaka iya yin wutsiyar haɗiye, amma dole ne ya yanke shi a cikin wani jirgin sama, wanda ba shi da wahala, amma, watakila, yana da sauƙi. Don yin ado, zaku iya amfani da katako a ɓangarorin biyu.
Bambanci tsakanin Balasin Heeping akan Koshur (malamin) shine cewa dole ne a sake tayar da rudiyya a wani takamaiman kwana saboda sun tsaya sosai a tsaye. Amma, a cikin yanke a kusurwar farfajiya, yana da wuya a yi rawar soja wani rami wanda ke tafiya tare da axis na kashi. Don haka babu matsaloli tare da waɗannan matsalolin, ramuka na farko, sannan sha a makullan da ake so. Mai sauƙaƙe mai sauƙi wanda ke sa aikin ya fi sauƙi.
Shigarwa na balyasin a kan malamin: tsari mai sauki ne
Akwai takamaiman hanyar da aka lissafta akan matakala da jagora. Yi subfalsesennik: mashaya, wanda "zaune" a kan kasusuwar saboda sinus ya sassaka a kasa. An haɗe racks a cikin baƙin ƙarfe, bolts, dambs ko zane-zane (mafi munin zaɓi). Zabi naku ne, sannan an sanya dukkan zane a kan malamin. Haɗin - m, yana yiwuwa a yi amfani da Bots, Sammalli, ƙusoshin don dogaro. Amma suna ƙarin gyara.
Akwai wani hanyar da yawanci ta shafi wannan nau'in matakala: Balasins an saita shi da ƙusoshin, zane-zane a tsakanin barusta an rufe ta hanyar toshe mashin. Tare da wannan hanyar gyara, zaku iya amfani da manne - ba zai zama superfluous ba.
Bayan 'yan kalmomi game da inganta amincin
Dukkanin ba'alasineners - a kan studs, scarswallon kai na kai, sanduna - da lokaci na gaba suna karaga, baya ya bayyana. Wannan tsari ne mai ma'ana. A lokacin da Loading, da takaici yana kwance a kwance. Da farko, karkacewa shine rabon wani millimita, mara ganuwa. Kamar yadda yake amfani, karkacewa yana ƙaruwa, da faɗin da ke kusa da shi akwai m ". Itace mai laushi, da sauri baya baya. Dole ne ku cire da redo. Wannan shine mafi girman don jinkirta da wannan lokacin, yi amfani da kowane ƙarin hanyoyin gyara abubuwa.
Akwai mai saurin ɗaukar hoto na Balasine a kan malamin
Mafi sau da yawa, manne yana amfani da ƙarin gyara karfi. Kuna iya ɗaukar kowane mai shiga ko guduro mai shigo da epoxy. Ba shi da ma'ana don neman mafi tsada - waɗannan aikin suna da kyau sosai. Wholes sun bata duk docks. Hakanan zaka iya sanya sanya kayan kwalliya na kai / kusoshi. Don mafi kyawu kama wurin da aka yi amfani da manne, tsarkake daga ƙura / datti, shafa flare mai ƙarfin hali.
Shigarwa na Metallic Bassine
Shigarwa na Balaasine da aka yi da sauƙi mai sauƙi: Akwai gyara na musamman - bumps, wanda aka goge cikin matakan ko zuwa gefen matakala. Ana ɗaure da Blaasine da kanta a ɗaure ga abubuwan da aka shigar, rack, ginshiƙi. Duk abin da ake buƙata shine zaɓar abubuwan da suka dace / girman.
Hanya Balusne zuwa matakai yana da ɗan sauki
Akwai wani batun guda ɗaya: yawancin 'yan fasters suna ba da shawara don gyara ballusters a cikinsu ta amfani da sukurori slums. Don haka, sukurori ba amintacce bane, irin wannan haɗin gaggawa fara "bawo". Tabbas, za a iya ɗaure su sau biyu, amma mafi aminci waldi. Idan ya ba da kauri daga cikin karfe - daga 1 mm da ƙari - Zai fi kyau amfani da waldi.
Krepim zuwa mataki
Alamar wuraren shigarwa na Balasine na faruwa kamar yadda aka bayyana a sama. Da farko, mun zabi daya a mataki daya a mataki ko biyu, to muna rarraba su domin duk masu nisa iri daya ne. A wuraren da aka bayyana a wurare suka kafa tantuna. Yawancin lokaci suna "zauna" a kan 3-4 Masu ɗaukar hoto. Jiragen kai na kai, idan matakan katako ko kuma downels suna da kankare ko matakai.
An saka ragon karfe / racks a cikin amintattun tsagi, ana saiti a tsaye a tsaye, welded. "Cuauki" ya fi kyau daga bangarorin hudu - don ware yiwuwar karkacewa ta kowace hanya. A kan wannan, shigarwa na ƙarfe na karfe (bakin ciki, nickel-plated, chrome karfe) an gama. Na gaba kawai buƙatar shigar da hannu, wanda shima ba ya wuya.
Yayi kama da wannan a matsayin daidaitaccen miraiters don shigar da maniyawan ƙarfe na Prefab Raular.
Idan bangon kauri daga bakin karfe na prefabba ya yi kyau sosai don walda, ba zai yiwu a zabi yanayin walding ɗin da ya dace ba, ya zama dole a tabbatar da bututun da ya dace da tantuna ta amfani da kashin baya. Clam, har yanzu ba a ba da shawara ba. Wannan haɗin kai da sauri an tsabtace shi da sauri. Kuna iya tsayayya da ramuka a cikin bututu, dunƙule da ya dace diamita masu dacewa a cikinsu.
Wani zaɓi don shigar da Blaasine daga mashaya: don Weld zuwa ƙarshen gashin gashi, dunƙule cikin mataki. Idan kuna son ramin a mataki, zaku iya manne da goro.
Gefe (ƙare) m na balyasin da ginshiƙai
Rufe racks zuwa matakai ne na gargajiya na shigarwa, amma akwai wata hanya: don gyara shi zuwa gefen gefe. Hakazalika, yana yiwuwa a saukar da tayin kowane nau'in: katako, ƙarfe, gilashi. Don ƙarfe da gilashi, ana buƙatar fastoci na musamman - clamps waɗanda aka haɗe zuwa bango, kuma kansu suna da tsagi da tsarin gyara struts ga matakala. Fooden ginshiƙai da Balasins suna cikin sauri ta hanyar zipball ko gashin gashi / matse kai, ɓoye kan a ƙarƙashin lids na ado.
Brackage don ƙarshen zagaye na zagaye
Zabi don tsananin zafin ƙarfe
Tare da ɗaure murfin katako na katako a kan matakala, wurin da aka makala za a iya yin wurin a cikin hanyar ado
Zaɓuɓɓuka sun bambanta
Brackle don gyara zagaye stair rucks zuwa bango
Tare da ƙarshen ƙarshen racks, yawanci ana yin su ne tare da ginshiƙan tallafi bayan wani nesa. Tsakanin ginshiƙai, cikawa, ba da alaƙa da tsani ba, amma tare da racks tallafi. Tabbas, wannan ba doka bane, amma daidai yake da irin wannan nau'in da ke da yawancin matakala tare da irin wannan haɓaka na Balusne da tallafawa ginshiƙai.
Hanyar da aka gabatar na sauri na kowane matakala tare da rufaffiyar gefe. A zahiri, kayan ɓangaren gefe dole ne ya sami isasshen ɗaukar iko. Hanyar ɗaukar matakala na matakala ya yi kama da ɗan sabo, wanda ke ƙara mai ɗorewa.
Latsarancin muni zai yuwu ga matakai, amma ba ga kowane nau'in matakala ba
Shinge na formami tare da hawa dutsen. Kayan kwalliya suna yin "ginannun" a cikin faɗin
Wani zaɓi don ƙirƙira faɗin da ke hawa zuwa matakalar
Ga wadanda ba sa fama da Claustrophobia
Kuna iya gyara kowane ragfa daban
Tabbataccen tsarin
Gefen gefen gilashin gilashi - a makulli na musamman
Matattarar karfe na prefab tare da dutsen da ke hawa zuwa matakala
Yawancin lokaci, kowane koguna yana amfani da makullan biyu, waɗanda suke a nesa na 5-10 cm ɗaya daga ɗayan. A lokacin da alamar, Hakanan zaka iya amfani da zaren rauni, jagora ko matakin Laser. An zabi wurin da yafi a tsakiyar ɗayan matakai. Ana zaɓar yawan racks bisa ga ikon ɗaukar tushe na tushe wanda za a goge su. Don itace, mataki na al'ada shine 50-80 cm, don tubalin, kankare, da sauransu. Kuna iya yin dogon nisa.
Mataki na kan batun taken: Fasahar Montage Montage