Hanyoyi daban-daban don shigar da kitchen nutse tare da hannayensu

Daya daga cikin manyan wuraren a cikin ƙirar abincin yau da kullun yana kulawa. Matsawarsa ita ce tabbatar da yanayin fara aiki samfuran samfuran, dafa abinci da wanke jita-jita. Saboda haka, shigarwa Wanke a cikin dafa abinci ya kamata a samar:

• Dacewa da tara sadarwa a gare shi: wadata ruwa da ruwan dinka;
• matsanancin mahadi;
• Shigarwa na hyggienic.

Makirci na daidaitaccen kayan wanki zuwa kwamfutar hannu a ƙasa.

Zaɓin sabon matattarar kitchen ya kamata yayi la'akari ba kawai bayyanar da ta waje ba, har ma don shigar da hannayensu. Akwai da yawa daga cikinsu:

• Shigarwa a kan brackets: ta hanyar hawa zuwa bango da masu riƙe ƙarfe;
• Overhead: shigarwa na kwamitin na musamman misali ba tare da tablestop;
• Shigar da wani mummunan aikin, hade da wanke: an sanya allon a bude teburin saman ko a karkashin murhun tebur saman.

Haɓaka zai taimaka wa koyarwar na gaba kan yadda za a shigar da dafa abinci a hanyoyi daban-daban.

Shirye-shiryen aiki

Kafin aiwatar da aiki a cikin dafa abinci a kan tsinkayen tsohuwar kwayar da kuma shigar da sabon, ya zama dole a mamaye wadataccen samar da ruwa daga masu harbe ruwa.

Cire tsohon humot: Cire haɗin da ya dace da goro na mahaɗa, eyeliner, cire mai canzawa; Cire siphon daga ramin magudana, sannan daga bututu mai zurfi, ramin bututu don rufe tare da kayan aiki; Cire matattarar.

Shigarwa a kan brackets

Shigarwa na wankewa a cikin aikin.

Kayan aiki da kayan da zasu buƙaci shigarwa:

• matakin gini;
• Mai sihiri;
• sikirin sikirin ko sikelin;
• da kai sau biyu scrup tare da filastik dowels;
• Brackets don wanka da sauri.

Mataki 1. Yi alama. Yi alama layin kwance a tsayin daka. A kwance ana bincika ta amfani da matakin ginin.

Mataki na 2. Juya a cikin rami juye, sanya brackets kamar yadda zasu tsaya lokacin da aka sanya nisan da aka sanya, auna nisa tsakanin su. Ya sanya sakamakon gwargwadon bango, Alama wurin nan gaba na baka. Ana amfani da brakets a jikin bango bisa ga alamun alamun kuma alama wuraren da ramuka don saurin sauri.

Mataki na 3. Cire ramuka don hanawa. A cikin ramuka don bincika saka filastik ɗin dowel. Haɗa baka mai ɗauke da sukurori.

Mataki na 4. Sanya matattarar, amintaccen bisa ga ƙira. Haɗa mahautsini da siphon zuwa wankin. Umarnin don shigarwa ana haɗa su yawanci. Haɗa zuwa isar ruwa da wadatar ruwa. Kunna ruwa, duba matsanancin haɗi. Idan an gano abubuwan da ba za a iya gano su ba, abubuwan da ba za a iya ba su da alaƙa don watsa, bushe da tattarawa, yin amfani da ƙarin sutturar silicone, a hankali shigar da gas da aka haɗa a cikin kit.

Mataki na a kan taken: Blooming shrubs don bayarwa - taken da hotunan tsirrai

Shigarwa na Panela Over

Shirye-shirye na matattarar a cikin aikin.

An hau wanke wanke a cikin musamman da aka tsara don yin wannan, sau da yawa ba tare da tsarin ciki ba, don ƙirƙirar tsangwama da bututun ruwa. Kwamfutar hannu a cikin irin wannan tumbai yana ba da ikon wanke wankin. Don haka, taron majalisar ministocin ya kamata a gudanar da su a matsayin amintacce. A cikin majalisa, idan ya cancanta, buga kara waƙoƙi don jumpers suna ba da taurin tsarin. Ana iya yin su da katako ko sassan allo kuma suna amfani da ƙananan shelves.

Kayan aikin da za a buƙaci don aiki:

• mai sikeliver don tara wani babban kujera;
• Electrolroll ko hacksaw - don yanke ramuka a cikin jiki don sadarwa, idan an buƙata;
• Maɓallin Shigar - don hawa eyeliner.

Lokacin zabar wuri don shigar da matsayin, yana iya juyawa cewa abubuwan da suka faru na samar da ruwa da kuma ruwan wutsiyar da ke cikin ɗakin kwano, kuma ba shi yiwuwa a ɗauke su zuwa wurin daga gefen baya na gefen bude saboda wasu dalilai. A wannan yanayin, shigarwa na wanka za bukatar na farko markup da sabon ramuka a wadda sadarwa za a iya taƙaice (siffa 1 A) da kuma b)).

Hawa tsarin nutse.

Kwamitin motsa jiki, wanda aka sanya a ƙarshen, ana iya lalata shi ko motsawa daga gaba. A cikin shari'ar ta biyu, akwai tsagi don mai lankwasa "salazok" na kwamitin da yake motsawa har sai ya tsaya har ya tsaya har ya daina.

Lokacin shigar da kwamitin wasan kwaikwayo, taƙaitaccen umarnin zai taimaka wajen guje wa kurakurai don guje wa kuskuren:

1. Yi alama matsayin ƙananan gefen matattarar ku, wanda aka sanya a kan bangarorin rami kuma a matakin lakabin don ƙarfafa sandunan tallafi don ƙarin ajiyayyun harsashi.
2. Aiwatar da Layer na Tealant a gefen saman majalisar ministocin kuma shigar da wasan kwaikwayo na famfo zuwa wurin na yau da kullun.
3. Shigar da mahautsini kuma haɗa shi don matsa bututu tare da m ko m linerin. Shigar da Siphon kuma haɗa shi zuwa bututun dinki. Duba tsananin munanan mahadi, sa ruwa. Yi bitar kasawar shigarwa da kawar da leaks.

Mataki na a kan taken: zanen bangon waya: Wace fenti don amfani

Shigarwa na hade harsashi

Wanke da aka saya don shigarwa ta hanyar buga wajan aiki ya kamata a zaɓi tare da samfuri wanda aka haɗa a cikin kit. In ba haka ba, alamar da kuma yankan ramuka a ƙarƙashin matatun ruwa na iya haifar da matsaloli kuma kada ku iya haifar da shigarwar danshi da ganimar da ke ƙarƙashin katako.

Yin ramuka don wanka a cikin tebur da aka yi da dutsen wucin gadi dole ne a danƙa shi da ƙwararru. Zai yi wuya a yi hakan ba tare da kasancewar kayan aikin da ake bukata don sarrafa irin wannan kayan ba.

Kayan aiki don Aiki:

• Elickrol da rawar soja;
• Shiga ko makullin gas - don Montage na sadarwa.

1. Mataki na 1. A hankali a yanke samfuri na kwanta don shigar da kayan dafa abinci. Efayyade wurin a saman tebur da ke wankewar Mortise ba zai tsoma baki tare da abubuwan da ke ƙarƙashin kwamfutar hannu. Gano wuri da samfuri a saman tebur da sosai daidaita shi a cikin layi daya zuwa gefen, amintacce kuma kewaya fensir a tare da kwane.
2. Mataki 2. A farfajiya na tebur fi tare da kwane-kwane don crack zanen scotch. Ana yin wannan ne don kare saman ta daga lalacewar Jigsaw Housing a lokacin da shan ramuka.
3. Mataki na 3. Haske Wani rami mai ban tsoro rami na ruwan hoda na lantarki. Yanke rami daidai tare da kwane-kwane. Wajibi ne a yi wannan ba tare da matsa lamba a kan jigsik ba, in ba haka ba zai zama ruwa, yanke hukunci, zai karkace daga layin kwane. A kowane hali, zai buƙaci ƙarin manimin gyaran slicer tare da shrybelbam, fayil, da makamantansu. Yanke rami na kayan kunama da bututun ruwa, idan ya cancanta.
4. Mataki na 4. saman surfaces a hankali kula da silicone silicone. Don yin tsayayya da lokacin da ya zama dole. Tafiya wankewa.
5. Mataki na 5. shigar da ƙirar Siphon a kan matattarar. Shigar da famfo don ruwan sha a kan tebur (idan ya cancanta). Yin amfani da samfuri don sanya ramuka a kan kwamitin wasan kwaikwayo don shigar da mahautsini. Ramuka Gyara mahautsini tare da mai sassauci a kan wanke motar. Saita kwallaye don wanke hade a cikin kayan samfurin. Ba tare da isasshen amincinsu ba. Kuna iya sanya hannuwanku da sauri da sauri daga teburin hawa na karfe, tafiya da tafiya zuwa ramuka na hawa.
6. Mataki na 6. A gefen teburin shine kuyi kuka da hatimin roba ko amfani da Layer Layer. Shigar da Kwayoyin. A kasan gefen, a cikin majalisar, a cikin majalisar, a cikin majalisar, a cikin tashin hankali na kan tef na hawa ta amfani da cikakkun bayanan babban kujera. A kewaye da panel ɗin da aka sanya, yi amfani da Layer na m trantind (yumbu ana iya yanka bayan daskarewa).
7. Mataki na 7. Haɗa sadarwa a cikin majalisar.

Mataki na a kan taken: ayyukan wanka tare da gazebo da barbecue - fasali na tsarin

Zaɓin Abokar zaɓi don shigar da Wanke motarka a cikin dafa abinci shine shigarwar kwamitin aiki. Don yin wannan, bayan yankan ramin da samfuri, ƙarin samfurin samfurin na tsagi ana yin su a kewaye da yanke na tebur.

1. Mataki na 1. Yi samfuri wanda zai maimaita masu girma dabam da kuma kwatsam na nutsewa da "reshe" bangarori wanda yakamata a buɗe. Aiwatar da kayan shafa da samfuri a saman gefen tebur saman.
2. Mataki na 2. Don yanke rami tare da kwalin ciki, rike da gefen gyaran teburin saman tare da fayil, Yaren mutanen Poland. Juya saman tebur.
3. Mataki na 3. Daga baya, zabi wani tsagi domin kwamfutar hannu 'yanci.
4. Mataki na 4. A sakamakon tsagi ne daga manne daga siilane da aka gyara kuma sanya wankin a cikin "juye" matsayi). Latsa kwamitin kusa da gefe tare da hannaye, to ta hanyar substrate don cire clamps a wurare da yawa kuma barin don amincewa da manne na 12-24 hours.
5. Mataki 5. Bayan da aka cire harsashi ausaller shine ƙari da aka gyara ta hanyar kayan Epoxy biyu. An shirya abun da ke ciki gwargwadon umarnin kuma an zuba shi cikin rata tsakanin kwamitin da kuma casing na saman tebur. Bayan ya taurare, wurin haɗi na countertop da wanka ba shi da lafiya tare da schoum scotch.
6. Mataki na 6 6. Kunna Teburin saman tare da matattarar dafa abinci, shigar a ƙarshen. Manne mai yawa a kusa da harsashi a hankali. Ruwa da haɗin dinki.

Shigar da mil a cikin dafa abinci ba shi da wahala kamar yadda ake iya gani a farkon. Babban buƙatun sune ingantattun ayyuka na aiki akan sawun duk yiwuwar shigar shigar cikin ruwa da ingantaccen inganci don hauhawar ƙwayoyin jikin mutum.