The windows are called eyes at home. Their appearance reflects the tastes of the owner. Finishing windows, their framing gives the facade a completeness, emphasize the architectural style of the building, its rigor and elegacity. Realtors argue that the framing of openings outside increases the cost of the house by 15-25%. A plurality of decorative elements from various materials allow you to create an individual image of the building, imitating any era and direction in the architecture.
Finishing windows siding
Finishing and framing around the window - element of architectural decoration
Finishing windows facing brick
Vadik came to me for advice. His elderly relative asked him to prepare and sell the house. It was necessary to maximize the price of the structure at the minimum cost for giving it a commodity type. The plot was located near the city, and we went to watch.
I immediately drew attention to the framing of windows. It was an old, burned out of cracked paint facing. She ensured the sealing of the opening, but the aesthetic look lost. Cash on the facade was absent. Make a beautiful facade can only be harmony of all elements. It should be started with the decoration of the doorway and windows in a single style.
We had to replace wooden platbands. We decided to put the plastic sandwich panels and make the framing of each opening in a single style throughout the facade. There was also a wooden ticket. She was prepared to replace the slopes from polyurethane.
Plastic Frame Details Most Practical
Independent finish windows
While we painted sketches of the future facade, I told a friend, what are decorative elements for cladding the opening, and how to make a cash inside and outside.
Article on the topic: Important detail: Chair bag and armchair-ball for any home (68 photos)
The decoration of plastic windows is performed from various materials:
- wood;
- a rock;
- porcelain stoneware;
- Rubber with the addition of crumbs;
- facing tile;
- plaster stucco;
- plastic parts;
- foam elements.
The tree is most beautiful in its uniqueness and warmth. But it requires constant care and quickly collapses from dampness.
Stone and porcelain is difficult to install, it is necessary to periodically cover varnish. The main lack of a large weight and load on the foundation.
The foam and gypsum look great, but they are hygroscopic, they need to do a multi-layer protective coating.
We were approached from polyurethane details. Plastic products look good inside and outside. They have several advantages over other products from other materials.:
- the same color to the whole depth;
- resistance to erasure;
- do not burn out in the sun;
- serve more than 20 years outside the building, without losing sight;
- moisture-resistant;
- fireproof;
- Easy mounted around the opening.
A large selection of details and kinds of polyurethane allow a novice specialist to independently make the platbands and framing the window.
Polyurethane windows facing elements
Window facing with their own hands
By making windows in details from polyurethane, we first installed plastic platbands. The windows relative to the size of the house were small. Therefore, white cladding should visually increase them.
The outside uses a large number of decorative elements made of polyurethane for the facing of the door and window opening:
- Sandrik - decorative cornice;
- console;
- rack;
- moldings;
- pilaster;
- window sills;
- platbands;
- Fakesheli;
- Castle stone;
- bracket;
- Imitation Rusta.
It is possible to use other details, such as stucco, socket. But they apply less often, mainly in the classic styles of Baroque and Renaissance. Before us was a modern house with a closed stone with a massive foundation. For visual equalization of proportions, the corners should be put in the form of rustic stones. Framing windows using wide side elements will increase them.
Article on the topic: From what in our time there are brooms for sweeping
Flower range of plastic products. White, under wood and various gray tones are most in demand. Colorics selected under the selected style. It is necessary to take into account the size of the building and openings. Bright wide cladding increases windows. If you need to reduce or do less noticeable, it is necessary to choose a dark color plastic suitable for the tone of the walls. Then enough to put the platbands and the windowsill.
If only a narrow molding is mounted around the perimeter of the opening, the facade will look strictly, in retro style. Bracket and Sandrik without console stretch the window vertically and make it already.
The castle stone reminds us of the times of the knights when they could not do smooth overlaps and arched arches were built. In combination with overlays under the Ruskin Stone, the illusion of a massive building is created. But such a cladding does not look at wooden houses.
Sirubams are suitable carved platbands and fakes. Color It is advisable to choose imitating pine and birch, you can simply white.
Decoration of the doorway and windows in a single style
Finishing windows
To give a stylish look, we decided on the first floor to put window sills from acrylic stone under the white marble. They are durable, repel water and are not afraid of frosts and UV rays. They look solid and elegant than standard plastic flows. Under them to lay brackets and moldings. From above wide Sandrik with a triangular protrusion in the center.
To increase the width of the doorway, we mounted pilasters on the sides, creating the illusion of semi-colonne. Similar wide consoles decorated with windows. Moldings around the perimeter Framing emphasized the geometry of lines, their rigor.
On the second floor there were plastic windowsill, platbands and the side wall of the opening of the opening was made by fiveers with arched Sandrick. On the front of the facade, the walls of the walls were facing around the passion by Rust. At the top wearing cloth stones and molding.
Article on the topic: How to assemble and install a shower cabin
Familiar realtor After completing our facade windows and transformation, said that the cost of the house rose by 30%. Properly created image of the facade is of great importance. After all, it is the outdoor view of the house produces a basic impression.
In addition, we have significantly improved the thermal insulation of windows. The outer decoration not only decorated, but also securely protected the walls from wetting. Inside it was quieter, the noise outside almost did not penetrate. Light framing strengthened the natural lighting of the rooms.
Facing the openings inside and outside the house
Inside the house we dismantled the old window sills and platbands. Installed plastic panels at the bottom. Replaced the heaters on the sides and at the top. Then they checked the vertical and mounted a new profile around the perimeter for support. Put the top slope. Winged the side panels and determined them in place, starting up for the starting profile around the frame and gluing the opening to the corner along the inside.
When the buyer came to look at the house, then I was convinced of Vadik in the correctness of our actions. He was not interested in the interior decoration, since each person alters after buying it in his own way. The condition of the pipes he checked purely mechanically to not flow. But a good condition and beautiful finish of doors and windows was seen first.