When searching for an optimal water heater, it is worth considering that flowing variations are compact, while tanks of cumulative models have significant dimensions . The masters recommend to decide before buying equipment, where it will be installed to make it easier for them to use, and the appearance of the design has harmonized with the style and decoration of the bathroom.
Factors affecting the installation procedure
In addition to the standard requirement, so that the water heater occupies a minimum of the useful volume of the room, it is necessary to ensure such conditions so that the equipment body does not create obstacles to the free movement of people. In most cases, users strive to hang a boiler as above.
Also, when choosing a place of installation, you should adhere to several rules:
- Equipment must be fixed by necessarily on the bearing wall. Installation technology provides an installation on a sacrifice of brick and concrete, boilers in no case can not be inspired by partitions collected from plasterboard;
- It is important to ensure a rational water supply. When choosing a plot under the water heater, it is better to give preference to the zone that is closest to communications;
- It is necessary to provide access to sewage, since the operation of the excess pressure valve occurs, moisture is taking place;
- It should be solved in advance where exactly the socket will be and how the wires will be connected. Regardless of whether electricity is laid in the bathroom, experts recommend connecting copper cable to a separate machine. The new wire must have grounding, the socket cannot be located near the shower or to the bath.
On a note! When designing a water heater masking system in the bathroom, it is desirable to ensure an uncomplicable access to the connection point, it will be relevant in case of repair. The masters also recommend conducting a regular prophylactic inspection of the TEN, which also implies the presence of a free space to extract it.
Top 5 ways imperceptibly use boiler in the bathroom
Household appliances installation wizards offer win-win options for the introduction of a water heater in a close room:
- Over the toilet. This zone, as a rule, remains unclaimed, flat rectangular equipment fit well here. This section of the wall will become a comfortable refuge even for the overall model, if desired, the technique can be "sewn" with a quick-mass attachment.
- Over washing machine . Here they act on the same principle - they pick up a flat model, mask it with furniture.
- In a niche in the zone near the bath mixer. The option is very convenient because the plumbing pipes are located nearby, but requires a professional approach due to the need for high-quality isolation.
- In the box in which the sewage pipes are . A successful option for relatively small models, here you will need to build an additional framework for fixing the boiler, for this purpose, side walls can be involved.
- Under the bathroom. The bowl is mounted a little higher, the free space remains around the tank. The required gap can be achieved due to the deepening in the floor screed.
On a note! All the gaps should be qualitatively sealed, otherwise the falling moisture will cause corrosion of the case.
Outdoor water heater can be installed under the sink, providing water from the rear. Vertical models are attracted by their compactness, they are often installed in the side and corner "deaf" zones of the bathroom, not fitted under functional lockers.
Article on the topic: Three-storey house Plushenko and Rudkovskaya with a garden of 1000 square meters. m.
Where to hide the boiler in the apartment (1 video)
Water heater in the bathroom (5 photos)
