Style and aesthetics in the room decoration manifests itself in detail. The list includes such a simple but necessary element, like a ceiling plinth. This small bar performs several useful functions at once: helps to hide the flaws of the repair work, smooth the angle between the wall and the ceiling, as well as protect the external coatings from all kinds of pollution. Often used for the manufacture of ceiling plinth polystyrene. It is about such a plinth that will be discussed.
What dignity
What are the main advantages of this material?
- Ecology. The polystyrene foam is absolutely safe for health and does not distinguish any harmful substances into the environment, so it can be safely installed in any rooms.
- Durability. The plinth from this material is practically not fade over time, retain a decent appearance and fresh color over the years.
- Strength. Its resistance to mechanical damage to the plinth of expanded polystyrene is largely superior to its foam festivals: they are difficult to cut or minimize them randomly. They also retain the form well and do not appear over time.
- Moisture resistance. Thanks to special processing, this type of plinth eliminates rotting, and, accordingly, reproduction of mold, fungus, and other harmful microorganisms.
- Acceptable price. The polystyrene foam products in appearance and operational characteristics are practically not inferior to wooden, but at the same time they are much cheaper.
- Safety. This material can be called fire-resistant, because it does not support the burning and does not distribute the fire.
- A wide range of. There are products of a wide variety of sizes, forms of execution and manufacturers: simple, complex and filigree - problems with the choice of ceiling plinth of polystyrene foaming should not occur. In addition, the list of his decorative properties includes the possibility of painting, so when there is no desired shade in the absence of the desired shade, you can change the color of the plinth to your discretion.
- Simple installation. A comparatively light weight makes the installation of the ceiling plinth of polystyrene with a simple occupation, which is even a newcomer forces. In addition, if necessary, such plinths are very easy to dismantle and reinstall in any other place.
I want to draw your attention to the fact that before installation you need to stock up with a set of tools and hold certain preparatory work.
Preparation for mounting
You will need a sealant from acrylic, a greasy tape, a mounting gun, glue, a fine knife, a rubber spatula and a stub.
Article on the topic: What to clean the mounting foam from Linoleum: Tips
Directly, the installation is made only after the ceiling and walls will be fully prepared - that is, they are cleaned from all over and thoroughly aligned with primer and plaster. The plinth is attached to the finish finish, and if you want to change its color, it needs to be done in advance. In the case when walls and decorative planks are planned to paint with one paint, it will also be much more convenient if the plinth is already mounted.
The preparation process also includes mandatory cutting of a plinth. In the presence of certain skills, it is possible to cut baguettes "on the eye", but if you are not a specialist - it is better to use the stupid - a special tool that will allow accurately and high quality plinth.
For the beginning, the longest sections are cut off, and the connection locations are thoroughly polished. Ready baguettes need to try on the corners, and if parts are perfectly docked, it means you can move to the next step.
Installation
In order for the installation to go without a bitch and zadorink, you need to arma with a detailed step-by-step instruction that will tell how to glue the plinth correctly:
- It has already been mentioned above that the light weight of the polystyrene foam plinth makes it possible to fasten this element without additional fixation. A standard adhesive solution or plaster is consistent, which should be applied too thick layer on the back side of the baguette. To this end, it is convenient to use a mounting gun - this tool will help to apply the fastening composition evenly.
- Installation is better starting from the corners of the room. It is important to evenly process the glue bar evenly, and then tightly press accurately to the installation site . In this position, the plinth must be delayed for a few seconds. If you use an acrylic putty, the grip occurs instantly, and it is not necessary to press the bar for a long time.
- The whole room is also processed around the perimeter, after which it is necessary to close the place of the joint of individual slats. If you do not plan to keep painting a plinth, then for this you can use silicone sealant. For baguettes, it is better to take a sealant from acrylic. For application it will be useful to the spatula or the same mounting gun. Surplus sealant should be carefully removed with a soft cloth or a piece of dense tissue.
- Before mounting the finish coating, it is mandatory to wait several hours until the glue and the sealant are finally dried.
Article on the topic: How to cover the gazebo in the country and make a wooden durable design
Installing the plinth of polystyrene is a completely simple process, which is quite realistic to master your own hands, without the help of the wizard. The most important thing is to choose a suitable product and carefully follow the instructions.
Video "What to glue polystyrene plinth"
On the video, a man talks about the pros and cons of materials, with which you can glue the ceiling plinth of polystyrene foam.