Many are interested in how to cut the castle in plastic doors and is it possible to do it yourself? Metal-plastic products installed on the balcony are traditionally not equipped with special locks. This is due to the fact that such doors are considered interroom, inappropriate lock systems for constipation. But practice has shown that this has a need to block the input or access to the balcony. Such devices can protect the apartment from attackers.
The need for a castle
There is a question, is there any need to install the lock for the balcony door? Installation of the key system is needed in such cases:
- so that small children could not independently disaccustomed to the balcony;
- When the balcony does not have additional equipment with lattices or glazing, and the apartment is located on the lower floors;
- Large pets are found in the apartment that can open the door themselves.
For the safety of their relatives and "smaller brothers", it makes sense to establish a handle with a lock. They differ from the latch in that they completely impede the free opening of the door. Professionals can open the balcony no more than in 7 minutes. Of course, if you wish, the lock for the balcony doors will not stop them, but the acquisition and installation of such a system will not be superfluous.
Design of locking devices
All existing design options are applicable to montage on balcony metalplastic sash
For the door, installed on the balcony, the most optimal option will be the castle cylinder. It has a smaller size than others, which means that the keyboard can be performed small. Such a lock is not difficult to insert between the reinforced items either directly into the handle.
The subject of the key system contains special pins. The rule is: than them are more inside, the higher the secrecy of the castle itself. The cylinder systems are well withstanding the manipulative hacking, but the rude invasion to withstand it difficult.
Article on the topic: Dermantine Door Upholstery With Your Hands: Wooden Sheathing, Metal Door
Replace the larva is very simple, disassembly is similar easily. One should only remove a small fastening element that is located on the end of the canvas.
All existing design options are applicable to mounted on balcony metalplastic sash. They allow you to change your own handle, which has a castle. The differences between them are minor, partly in technical details.
In order to correctly choose the castle on plastic doors to know their features well, as well as distinctive characteristics.
The design directly the door itself from plastic has differences from products made from other materials. This is caused by different methods of inserting locking systems.
Features of the castle for PVC sash
It is simply impossible to perform the lock in the lock, which is designed for metal or structures of wood, is simply impossible to the door leaf from PVC. In this case, the canvas may be damaged on the plastic door. Therefore, in stores or on the market it is better to acquire special locks intended for plastic products. The housing of such locks has a certain size corresponding to the width of the profile. This allows the locking system not to persist in fillers or to glazing.
In the canvas of plastic, as a rule, mounted locks of a mortise type. They help to maintain the aesthetics of the whole design as a whole. But if you need additional protection against penetration, you can apply overhead locks.
Types of castles
There is a large range of diverse types of locking mechanisms. Separate them follows from where the canvas will be placed how reliable the castle should be, and many other factors.
The plastic structure can be installed both attachments and a mortise lock. They may differ in functionality, practicality, as well as constructive features. The main types of locking mechanisms that are mounted in plastic doors are disposable, as well as multiple.
The first view does not provide great protection, as it has only one locking point, because of this, the door does not fit too tightly to the canvase. This is explained by the fact that the product is pressed only at the point where the castle crashed, smoothly in the middle of the door. Such a castle has a faleval latch, as well as a brigal. Substone selection of locks for plastic structures, see the video below:
Article on the topic: Bagentar curtains for curtains: ceiling, wooden, plastic
The second form is used for more reliable protection from intruders, as it has several locking points. They come into contact in several places with the box from this, the density of the fitness is excellent. Lock devices are powered by a special bus. Due to this, sound insulation is improved, and heat is securely stored indoors. Doors do not savage and are not loosened.
Castles due to different manufacturer materials can be completely made of metal, as well as partially from plastic. The first option compared to another is widespread, has high strength, as well as improved consumer qualities.
Multiple mechanisms are divided into two types. One of them has a drive from the cylinder, and the second from the handle. When using the first option, when the key rotates, the eccentrics are put forward and the riglel is closed at the same time. Applying the second option, turning the handle, drives the eccentrics into special strips and tightly presses them to the box. The available key locks the lock by the extending rigle.
Other mechanisms
There is still a suvalid castle containing plates made of steel. With the help of protrusions on the key shifted. Locking systems of this type are very reliable. But if necessary, replace, you will have to buy the entire mechanism.
The cylinder mechanism works in a completely different principle. It inside has a rod in which there are pins. When the key rotates, a certain combination is created and the lock can be opened.
Replace such a system easier and cheaper, because only the rod will be updated.
Electronic locks are able to transmit important information to the computer.
Electromagnetic, as well as electronic locks, differ in mechanisms that open the design. To work requires the supply of electromagnetic pulses, which turn off the magnet. When operating, the mechanisms are not wearing and also provide long-term and high-quality work.
Such locks for doors made of plastic have one feature. They are able to transfer important information to the computer, how many times and who took advantage of the keys to enter the room. To do this, there are special programmed keys whose use is monitored by the system.
Article on the topic: How to protect the pump from dry stroke
Installation of the castle
Installation of the handle on plastic structures does not take much time, and the complexity is no different. To install, initially select the handle that has a cylinder system, and the keys or the usual high quality latch. It is important that the pens and other parts of the fittings were one manufacturer. On how to install a lock on a plastic balcony door, see the following video:
Then it is necessary to dismantle first a handle without a locking system using a cross screwdriver. Unscrew the screws, pull the handle with the pin, and put a new mechanism in its place. You can fasten the same self-reserves or use new ones that are included. Close them with decorative plugs. The main thing is that the diameter of the holes approached the fasteners.
Installation of locks on balcony doors increases comfort, prevents unauthorized penetration and random opening of the sash. In addition, the appearance and functionality of the system is improved.