Bed under the ceiling with your own hands (photo)

Text Press: [Hide]

• Bed varieties under the ceiling
• Preparation for work
• Assembly of an unusual bed

Each owner of a small apartment tries to use the space in it as soon as possible.

It should be remembered that the corners of the connection must be strictly straight.

One way to save the bedroom space is a bed under the ceiling.

If you make it right, then it can have one or two bedrooms not only for a child, but also for an adult. Under such a bed is conveniently located the desktop, chest or sofa.

Bed varieties under the ceiling

Circuit assembly diagram.

There are several different types of attic beds. They are characterized by their functionality. The main varieties are:

1. Mini attic. As a rule, it is installed in a nursery, there are various lockers under it, and its height from the floor is about 80 cm. Children from 3 years can sleep on it.
2. Bed with space for storage. This is a traditional design under which the cabinet is located, shelves, dresser, etc.
3. With a working area. Under the bed is a desktop, computer.
4. Bunk. In such a design, 2 beds are provided, top and bottom. They can be performed in a single case or in different.
5. French bed-attic. This is the most original option. This design is equipped with a mechanism operating on the elevator principle. If such a bed is raised, then the room can serve as a living room, and if you lower, then the bedroom.

Please note that it is necessary to produce such adult beds from more durable and reliable materials due to greater weight. The design of adult models, as a rule, is distinguished by restraint and clarity of lines.

Back to the category

Preparation for work

Background creation scheme.

Many craftsmen do not buy a attic bed, but make it with their own hands. Start work is necessary with the preparation of the project. Think over the parameters of your product, taking into account its species, design features, manufacturing material, the number of beds and ages of people who will sleep on it (adults or children).

Article on the topic: Device of balcony plastic door

The bed under the ceiling can be attached using various devices. As a rule, the bed rests on 4 supports or 2 racks, and opposite angles are attached to the wall. This unusual piece of furniture can also be attached to the ceiling, wall or between the walls, if the room is quite narrow.

Bed dimensions depend on the sizes of the mattress to be installed. If you cannot find the mattress of the desired size, you can be made to order in accordance with the desired bed parameters. The mattress should be 12 cm already than the body, and 5 cm below it.

If you want to make a bed under the ceiling, calculated for two adults, then its optimal parameters will be like this:

• Length - 2.13 m;
• width - 1.53 m;
• The distance from the floor to the bottom of the hull is 1.67 m;
• The distance from the floor to the upper point of the housing is 2.14 m.

For the manufacture of such a bed you may need:

• Board 220x10 cm - 2 pcs., 201x10 cm - 8 pcs., 150x10 cm - 2 pcs., 141x10 cm - 8 pcs., 56x10 cm - 6 pcs., 47x5 cm - 4 pcs;
• Bar of 214 cm long - 4 pcs;
• plywood - 141x5 cm - 16 pcs;
• Furniture wanks;
• transparent lacquer on acrylic basis;
• Morida.

Please note that the thickness of the board must be 2 cm, plywood - 1 cm, and the cross section of the bar is 6x6 cm.

Tools needed for work: screwdriver, roulette, square, level, screwdriver, electric jigsaw or hacksaw, furniture key.

From the tools you should be as follows:

• electric jigsaw or hacksaw;
• screwdriver;
• Tree drills;
• level;
• Corolnic;
• roulette;
• screwdriver;
• furniture key;
• sponge and brush;
• pencil;
• sandpaper.

Back to the category

Assembly of an unusual bed

When everything you need is prepared, you can move to the installation of the bed. Stick in the following procedure:

Article on the topic: How to place a place for a fire at the cottage (55 photos)

1. Treat all sowers and sharp corners of all wooden parts with emery paper. If they are not polished, they will not hurt over them with a grinding machine either.
2. Drill holes in which fasteners will be inserted.
3. Connect the 6 bed back track details with supports with furniture waders. Secure the details together with furniture bolts.
4. When both backs are ready, you can connect them to the beam using the wrenches. Screw the beam with two bolts, but do not tighten strongly.
5. Mock the angular beam by scraping 2 boards. Secure it to the backs of the wrenches.
6. One angular beam should be located side of the wall, and the second one with the outer. To the latter you need to attach the limiters, thanks to which you do not fall from the bed in a dream. You also need to leave a place under the staircase from the side with which you will be convenient.
7. The main design is ready. Now you can tighten the bolts and secure the compounds with metal corners if you wish.
8. Collect the staircase and secure it on the housing.
9. Place pieces of plywood on the bed so that you can put the mattress. Instead of plywood, you can use the Fiberboard sheet.
10. Treat the surface first by the mourn, and then varnish.
11. After drying the finishing materials, you can install the mattress in the bed.

During operation, be sure to check all the corners of the connection, they must be strictly straight.

Now you know how to make a bed. Such an unusual solution as a bed under the ceiling will allow you to use space in the bedroom with maximum benefit.