Head of bed inherent part of sleeping furniture. It not only makes the furniture convenient, but also plays an important role in the interior of the bedroom.
You can always rely on this item. After all, we all love to see the TV for a cup of tea. This is to do much more comfortable sitting.
To do this, we need a support, which serves the headboard.
It also protects the wall and wallpaper from rubbing, which will save the freshness and beauty of the finish.
You can make a headboard with your own hands for bed design:
- soft;
- figured;
- in the technique of a carriage tie;
- from patchwork;
- From pillows and so on.
Bed headboard
Imagine you the easiest option that any man can do. Even the one that does not have skills in construction.
In order to make a soft headboard in rectangular shape you need:
- a rectangular piece of plywood (can be replaced by any shape, respectively, the headboard bed will be another form);
- dense fabric;
- foam;
- Sintepon;
- Building stapler.
You will spend a maximum of 3 hours for such beauty, and if you do this not one, then it is less.
How to make a soft headboard for bed
We take a plywood sheet, preferably thicker, and put the foam rubber on it in two layers.
We take unnecessary flap of fabrics, put it on Faneur and Porolan so that it goes to their edges for about 15-20 centimeters, and secure it with a stapler.
On top of the fabric creating a beautiful flap, which approaches your interior at home.
As you can see, the method is quite simple and fast, so in a few hours you transform your bedroom.
Curly headboard do-it-yourself
This headboard will be soft, but differ in a special relief, which will give chic and wealth.
Article on the topic: How beautiful to arrange the walls with curtains
For him we will need:
- plywood sheet;
- Building glue;
- chalk or soap;
- foam;
- stapler;
- unnecessary material;
- upholstery fabric;
- Furniture nails.
Construction glue is better to choose a universal, which can easily glue cloth and foam rubber.
We need chalk or soap to apply marking on the fabric to cut a smooth piece.
How to make a curly headboard
You must start with a sketch, which you will make your drawing and markup. It can be any form. Easy relief is usually done.
If you have the necessary skills you can cut and flowers and other patterns, but this is a rather difficult lesson.
Cut out our drawn billet from plywood, foam rubber and fabric. It is necessary for starting to try using the paper workpiece so that it fit into the overall interior of the bedroom or another room.
Next, you need to stick the foam rubber to the plywood and for reliability, secure its edges by another stapler.
We do the same actions with the cloth.
Raise the headboard horizontally and start pulling the cloth from the reverse side using the bracket.
Make cuts on the fabric so that it can perfectly repeat the relief of the head of plywood.
Furniture cloves decorate the upholstery, securing them in 1 centimeter from the edge of the head of the bed.
To make the second line of decorative decoration with cloves, make marking chalk, retreating from the first line about 10 centimeters.
Pribe cloves on the intended line.
Unnecessary flap cloth close the opposite direction, fixing it with a stapler.
Adjust the headboard to the bed or wall. You can also just put it on the floor near the edge of the bed, the Opera near the wall.
Steghan headboard in a kareny tie technique
Such a headboard will be mild and in many stores it can be found quite often. This is considered a modern and interesting design of the bed.
We need all the same materials:
- plywood;
- foam;
- stapler with brackets;
- air gun;
- Sintepon;
- the cloth;
- cord;
- Large buttons with a fabric surface.
Article on the topic: How to get out of flax on the thread?
We take Phaneur and smear it with glue. Then we glue the foam rubber, the thickness of which should be at least 5 centimeters.
We put a large sheet of paper and draw holes for buttons on it. It is advisable to make them smoothly around the perimeter.
Cut holes in paper or cardboard.
We apply a sheet to the foam rubber and a felt-tipper we supply the hole.
To transfer the holes to the foam rubber, you must use a drill with a nozzle.
You can stick to the foam rubber, making exactly the same holes as we did on the foam rubber.
If you wish, you can do without syntheps. Just with him a headboard with your own hands will be softer.
We stretch up the upholstery and the drill make holes to the very end, since we will stretch the cords on the buttons through the entire layer.
We stretch the cord through the buttons and make them in the hole. For convenience, you can use some hook.
Well tighten the cords so that the buttons fit tightly to the upholstery of the head of the bed. Fix rope stapler.
Soft headboard bed of flaps
If you do not want to spend money on a large piece of material for furniture upholstery, you can replace it with various patchworks.
It can be old jeans, dresses and any other clothes. Thus, this method will be very profitable and economical.
We need:
- 2 sheets of plywood;
- saw;
- scissors;
- filler for the headboard (foam or syntheps);
- Fabric flaps;
- glue and adhesive tape;
- stapler;
- screwdriver;
- Saws.
How to make a soft headboard bed of flaps
Draw a sheet of plywood on squares or rectangles. Next, we take a saw or hacksaw and start cutting the figures.
Calculate the number of figures you must independently, since the fantasy and desires are different.
Foam rubber or syntheps are cut into the same figures, but from the fabric cut the flap for several centimeters more.
We glue each layer: plywood - foam rubber - fabric. The tnank should be stretched quite tightly so that the folds are not formed. In the same way, you can repair the old furniture.
Article on the topic: How to paint the laminated door: features and processing algorithm
Secure the fabric again in the stapler, for reliability.
Thus, we do all the shapes, creating elements of a soft headboard for the beds of flaps.
We lay out all the squares on the floor of the face, forming the future headboard. Glue them with each other adhesive tape.
We take the second Phaneur and impose on our squares. With the help of a screwdriver and self-tapping screws, kpripim each pad to plywood sheet.
Select the length of the self-building in advance so that it does not pass through and did not spoil the headboard.
All is ready! You can attach it to bed or wall or just get alongside.
Headboard for beds from pillows with their own hands
For this we need a lot of small pillows. It depends on their quantity, size and desired headboard.
We take pillows that can be different colors or monophonic and sew alone to the other at the corner.
You can attach pillows to the wall with the help of glue or carnations. The glue in this case will be the best solution, because a nail can break through the pillow with time.
So you will spoil the headboard and can be injured. Another great way to attach pillows to the eaves.
As a headboard for the bed, it can go and panel with their own hands. It is also easy to make it, but it looks gorgeous.
Also an excellent idea can be a decorative fence. This option will not like everyone, rather to someone who loves hang things on the head of the bed.
If you are not afraid of rigidity, you will build a headboard from ordinary boards. Paint it or make the inscription of your names, drawings and so on.
If you know how to draw beautifully, you are lucky. You can create a fairy tale in your room.
Draw on the wall, wallpaper or graphite blackboard a fantastic headboard. A unimaginable impression of illusion in the interior will be created.