Alpine slide with their own hands [7 tricks]

Diversify the beautiful, well-groomed territory of the garden will help mountaineering. An independently created alpine slide allows you to implement the creative potential of the host of the host in reality, bring the highlight, create a stylish element of the landscape of the household site.

We select the perfect place and the size of the Alpine slide

Optimum location for mountaineering - outdoor sun and looks. It is desirable that the slide is isolated from the wind. The size of the slides will be determined individually. But so that the mountaineering looks spectacularly and became the real decoration of the garden height of it should not be less than half a meter (from three to five tiers). The composition of stones and colors should differ naturality and organically fit into the already existing landscape of the household plot.

What stones and plants are suitable for creating a mountaineering

Stones for future landscape composition will be required of different sizes and shapes. In the work it is worth avoiding stones of sharp forms. Traditionally, sandstone, limestone, travertine, river boulder, noble granite are used to create alpinaria.

Plants for mountaineering are selected with some requirements. First, flowers, grass and shrubs should be unpretentious to the soil and climatic conditions, do not multiply "aggressively", to be short and moderately growing. In the process of creating an alpine slide, the emptiness between the main vegetable elements can be filled with with flowers - one-air (for example, velvets).

ATTENTION: Maintain the beauty of the Alpine slide will help plant landing with different flowering frequency.

We prepare the soil

According to a predetermined scheme, on the prepared plot we carry out the markup of the future slide. For this, the perimeter fixes the pegs and stretch through them the twine. Then carefully remove the turf.

Article on the topic: Create at home: Sewing basics

Preparing the foundation for the mountainaries right

On the bottom of the dug, the pit is laid out with a layer (10-15 cm) from the broken brick, pebbles, crushed stone or small gravel. The second layer is sand (no more than 10 cm), which must be thoroughly tumped and shedding with water. The correct sequence of actions will prevent the destruction of the Alpine slide in the future.

How to prepare the soil for plants Alpinaria

Ensure the growth of flowers, shrubs and grass of the Alpine slide will help properly selected soil. To do this, they mix in equal parts of the dug dull, peat humid and sand.

Important: Derne must be thoroughly clean from weeds and roots.

Laying the stones Alpinaria correctly

First of all, the biggest boulders are laid out. It follows them from the perimeter of the Alpine slide. It is important that the stones are well fixed . For this, they are laid out with a flat side to the ground. If necessary under the boulders, small stones are put on or gravel, soil. The boulders of the lower row can be chopped into the ground one-third. After the first row is laid, a prepared primer falls asleep to the center of the slide. The second tier is formed from smaller stones. The smallest pebbles are laid out at the top of the mountaineering and in the fields of voids. Between the stones, it is necessary to leave a bit of place to disembark future plants.

IMPORTANT: After the stones are laid out, the slide must be shed a good water and leave ten days for shrinkage.

Secret: Before laying a new layer, the soil of the previous tier is thoroughly tamped.

Looking out the plants Alpinaria correctly

Plant falling down from the top of the slide, gradually going down to the base. Plant type is determined in advance. Looking out flowers is necessary in small wells, which, after disembarking, fall asleep with a soil mixed with small pebbles.

That's all, the Alpine Gorka is ready. It can be supplemented with fine pebbles, garden figures.

Article on the topic: Top 5 bold ideas for ceiling