The main goal of the glazing balcony with removal is to increase the area of balcony design of multi-family and private houses, the balconies were originally designed as a place for solitude, lunch, relaxation, etc. Therefore, they are usually glazed to ensure a comfortable stay on it when sediments, strong winds, cold. However, the balcony itself has a sufficiently small area, which is significantly "eaten" when installing glazing. Even the most modern and relatively not large glass windows in the amount of "eaten" about one square meter of space, and sometimes more.
Does it make sense to remove a balcony with PVC glazing
To solve the problem of "irrational use of space" produce glazing a balcony with a removal - in this case, the frame and the lower part are out of the limits of the balcony plate, "hanging" above the ground. This allows you to significantly increase the balcony area. Especially relevant, these works are for the owners of Khrushchob. The fact is that quite often in Khrushchev, the balcony was sold quite large, sometimes with access to the kitchen. Its glazing will significantly increase the efficient area of the kitchen or room that at the small area of the apartment is quite effective.
Balcony's removal with glazing PVC makes sense, because in this case you get a comfortable and wide windowsill
It is worth noting that it is ineffectively to make such work for the loggia - because you can only "make" a glass unit (no one will give permission to takeure the walls).
This version of the balcony finishes has a large number of supporters and opponents. At the same time, both parties have arguments that are quite substantiated.
Article on the topic: Loggian glazing technology: Selection of glazing, installation steps
Of course, most people prefer to carry out glazing beyond the balcony, as it has certain advantages.:
- Allows you to significantly increase the size of the premises to which the balcony is attached due to the balcony. In this case, it is possible to effectively use not only the area of the balcony itself, but also the area to which it is "taken out". Usually, the "remote" space (which is obtained between the end of the balcony and finishing material) is used as small bedside tables - shelves are satisfied with the doors.
- As a result, the balcony will have a more convenient and wide windowsill, which is also the rational use of space. A wide windowsill allows you to easily sit on the window, it is also possible to accommodate flowers on it.
- Externally and indoors will have an original appearance that will create your own unique design of the received room.
- In this case, there is a significant increase in the area of windows (since under the "removal" increases the distance between the wall of the house and the frame, which will lead to an increase in several square meters of windows area). This allows you to significantly improve the illumination indicator, both on the balcony and in the adjacent room.
- Such work requires strengthening the design of the balcony itself.
PVC-glazing of the balcony gives the considerable weight of the entire facade design
Opponents of this decision argue their position with the complexity of such work, the need to coordinate such work with controlling bodies, when assuming miscalculations and errors, the likelihood of the design of the structure is high (this threatens criminal cases), as well as the high cost of performing such work.
To learn in detail about what is required to perform these works in a particular region of the country (in terms of permits), you should contact the relevant services or learn the reviews of people who have already taken out their balcony.
Glazing balcony with removal (video)
What advantages have a balcony with a removal of the windowsill
This balcony takeaway is one of the popular solutions that allows not to reduce the useful balcony area, but at the same time make it convenient and solve several problems.
Article on the topic: Installation of a washing machine: selection of the place and features of the connection
The first advantage of this method - due to the deposancy, the internal balcony space is visually increasing, but the real area remains old. Thus, without increasing the area, you can improve the rationality of its use. In this case, it is possible to install the windowsill up to 0.35 m wide.
Wide windowsill - this is one of the advantages of glazing a balcony with a removal
In this variant, the windows simply shift a bit into the street by 30-40 cm. To do this, use special aluminum brackets.
This increases the illumination of the premises, and the wide window sill can be used as a stand or simply working surface.
With a non-adjacent balcony, it is possible to increase its area not only by mixing the main (front) window, but also side windows. At the same time, the width of the balcony increases - there is practically a visual increase in space for 3 sides.
Another, the most important advantage of this option is the lack of the need to obtain permits, because it is not redevelopment of the premises - there are no new capital partitions. This eliminates the need to follow the instances, approve and coordinate the project, etc.
However, it should competently perform preparatory work - project development, measurement, carry out the necessary calculations to avoid the collapse of the structure.
The glazing of the balcony with the removal does not require special permission
What you need to know:
- Standard special metal frame is mounted on the ready parapet.
- At the same time, the sizes of the frame are large enough - it is fixed along the entire length of the window opening and all over.
- This allows you to significantly strengthen the design of the balcony itself.
- In this case, this frame should be hidden indoors, which requires its skin.
Most often, the frame is trimmed either by wood or plastic. From the outside, this frame is also trying to persuade (you can use siding, insulation, etc.). In this case, an additional insulated layer for loggias and balconies is created, which significantly reduces heat consumption.
Article on the topic: Monkey Cross Scheme: By New Year 2019, free, drawing
How is the glazing of the balcony with the roof and removal
To glazed the balcony, which has a removal and roof, the first thing is to choose a special bracket framework, which is mounted on the installation. Naturally, the frame will not be able to withstand heavy windows, however, relatively light metal-plastic or wooden frames, as well as one-chamber glass, which has a small mass.
This figure presents a detailed scheme of the balcony with a roof and removal.
Work on glazing in this case differ little from standard glazing, which allows them to do their own hands without resorting to the help of employees and firms. The main difference in the works is the need to install a special aluminum bracket for a frame on a metal "remote" frame.
However, the complexity of the frame of the framework arise - it is quite difficult to find a welder, which can high-qualityly weld aluminum with steel.
To install pure wooden frames, it is necessary to simply weld the steel corner to which the frames are attached.
How best to carry out the warm glazing of the P-3 balcony with removal
On the warm glazing of the P-3 balcony with a removal of the price will be higher, since the installation of the entire design has its own difficulties.
To effectively use the "Treshka" space, you should make the removal of only the front window, and the side leave on the spot. Otherwise, the outstanding side windows can overlap the windows of neighboring rooms, which will reduce the level of their illumination and worsen the view from the window.
Warm glazing balcony (video)
When insulation, any non-heavy heaters and double-glazed windows can be used (for example, one-chamber with energy-saving glasses and a plastic frame).Examples of glazing balcony with removal (photo)
