Tennis table with your own hands
Table tennis is a fairly common sport in the world, the popularity of the game is great in adolescents and even in people who are far from forty. During the game in tennis, the muscles of the person are loaded proportionally and synchronously. In relation to the "older brother" Bolshoy Tennis, the desktop does not require a large area and a serious sports inventory. In every courtyard or school sports field there is a tennis table and there, in the summer youth is going. The wooden tennis table design fits perfectly into the home interior. Many managers of office structures support the direction of a physically healthy team, set tables for playing tennis during lunch breaks. Make a tennis table can even teen if he really wants to play table tennis with his friends, parents.
To do this, you will need:
- Legs 8 pcs. from a wooden bar 30x40 mm, length 720 mm;
- Longitudinal bar 4 pcs. from a wooden bar 30x4 mm, length 360 mm;
- Sideboard 2 pcs. Board 20x200 mm, length 500 mm;
- Putting plan 2 pcs. from a wooden bar 30x40 mm, length 900 mm;
- Locking synchronizer 8 pcs. from wooden bar 30x40 mm, length 100 mm;
- Hinged area 8 pcs. from wooden board, 20 mm thick, 80x30 mm;
- Thin-breed bracket 16 pcs. Fiberboard 10 mm;
- Pandine dress 16 pcs. Fiberboard 10 mm;
- Bolt with bars nut 8 pcs. bolt M8;
- Countertop 2 pcs. Chipboard with a thickness of 20 mm cross section of 1522 x 1370 mm.
Manufacturing process.
First stage.
The support legs for the table are the designs with four modules of P-shaped parts. In one module, there are two legs from a bar in size 40? 30 mm and in a height of 700 mm, interconnected by a longitudinal timber in length of 1360 mm. In the upper part of the legs, fine-dotted brackets are embarrassed and mounted. In each thin-breeding bracket, the hole is drilled by the R30 size. The center of the table support serve two connected modules that are in the middle of the design. Did they connect with each other two side boards in size 500x200? 20 mm and create a powerful "ringer". The remaining two modules are relaxed at the side of the table top. They are connected to the main modules of overhead racks from the bar. On both edges of the planks installed synchronizers of fixation from small bars. And for connecting minor modules with basic modules, the wounds are used by the indicated planks, the overhead method on the longitudinal bars, which fasten the legs of each module.
Article on the topic: What wrote curtains for curtains in the interior look like
Second phase.
The tabletop can be made of two identical parts of the Fiberboard, cross section1522x1370 mm. The front side of the Fiberboard should be covered with plastic. Well, if there is no plastic on the table top, open the top side of the olifa (give time for drying) and then cover with several layers of oil paint (preferably green). For markings on the table top are used white paint. Apply it to the pre-made pencil marks under the rail.
Third stage.
The technique of installing the bracket-hinge platform is made as follows. In each hinged platform bracket, the hole is drilled by the R30 size. On the opposite side of the game field, there are platforms, four pieces on one half of the fiberboard, respectively, in terms of coincidences with a fine-docked bracket that are installed on the legs of fundamental supports. Using epoxy resin or screws (it is necessary to envisage so that the screws are appropriate size and have not passed through the tabletop), the bracket-hinge platform is attached to the joinery glue.
Fourth stage.
After drying the adhesive, the playing field is installed in parts for the foundation supports, by connecting the teaching of the bracket-hinge platform with fine-dotted brackets, in the previously done holes, are fixed with bolts or barish nuts. After installation, the countertops fix overhead planks for longitudinal bars. Upon completion of the assembly, you can pull the grid for the game.
On the country site.
A comfortable place for the location of the tennis table is in the backyard of the countryside, there is enough space for different games and in particular for tennis parties. It would not be bad if the sports equipment was in a secluded place under a canopy (terrace, closed patio, a big gazebo). Table tennis game is always a pleasant transmission time.