Many dog breeders contain their pets on the street. Woliers for dogs can be installed not only in the courtyard, but also in the apartment. In both cases, it is necessary to comply with certain requirements for design. What should pay attention to the Waire Construction for the four-side friend will be told in this article.
Requirements for new dwellings
To make a special fence with a cozy house for your favorite, you need to know about the requirements:
- The dimensions of the structure should relate to the dimensions of the animal. There are certain standards for determining the area of construction. If the height of the cells of the pet is 45-50 cm, then the minimum voltage square should be 6 square meters. m. At the height of the animal in the withers of 60 cm - at least 10 square meters. m. With large dimensions, lovers can freeze;
- Materials should be environmentally friendly and not allocated under certain conditions (for example, when heated under direct solar rays), poisonous substances;
- Walls and floor should not have holes and cracks, as well as bypass and areas where the dog can injure himself;
- If necessary, internal elements of the enclosure (for example, a booth) are insulated. Thanks to warming during the cold season, the dog will not freeze;
- Part of the floor of the design is recommended to leave free from boards and foundation so that the animal can in vivo to protect their needs;
- Walls are made with lumen. So the dog will be able to observe what is happening around. Maximum two walls are made deaf. For their finishing, the "breathable" material is used;
- The roof is constructed by a show, so that snow and other precipitations do not delay on it. It is also done waterproof.
Article on the topic: Choose rolled curtains and blinds in Lerua Merlen
It is recommended that the door to the aviary opened inside. However, this rule can not be observed. The entrance is made one. The service passage is not needed here. Inside such a design, a conserve should always be, where the pet will sleep and relax.
Such requirements are necessarily performed if the street construction is made for representatives of large breeds. If the dog is small, it is quite possible to build a compact blocking option.
Room Wolter can be easily made with his own hands. The main thing is to choose the following points:
- location. It is impossible to put this kind of construction near heaters, as well as open fire sources;
- Dimensions. Dimensions here are also determined based on the size of the PSA;
- material. The material used should not be toxic. Do not choose it, focusing only on a beautiful view.
Video "Woller for dog with your own hands"
From this video you will learn how to build an aviary for a dog yourself.How to build yourself
Build a street aviary for a home dog can be in several stages. Consider each of them in detail.
Determine the size of the structure and place
First you need to make a drawing. To do this, it is necessary to correctly calculate the height, width and length of the structure. They are determined based on the size of the animal (depend on the breed). If the pet is a puppy, then the construction is allowed to "grown". But very large aviary can not be done.
All sizes are transferred to paper. The project is very convenient to build, so all the assembly stages can be calculated in advance, and not on the go.
This construction should be located away from home and buildings, which contains domestic cattle. Otherwise, the smell from them can negatively affect the smell of the dog.
Wolfer yard can turn on the tree if the construction has a roof not over the entire area.
How to lay the foundation
Such a building requires a reliable foundation that can be point or solid. It is organized from a metal profile (channel or a large corner), which is fixed in concrete.
Article on the topic: Fashionable ways in 2019, ways to tie a scarf, handkerchief, palatine!
Initially, a trench breaks over around the perimeter. The metal grid is placed in it. In the corners of the ditch, piles from the profile are installed. After that, the trench is poured concrete.
You can make the basis of separate piles located around the perimeter of the construction.
Installation of fence
After creating the foundation, construction moves to the next stage - installation of fences. Street avoire can be output from ordinary wooden boards or use metal grid to cover walls.
Initially, supports are displayed. They can be made from wooden bars or iron pipes. There is a grid or lining between the supports. Two walls should be made deaf to protect the pet from cold wind and drafts.
Before installing all the wooden components are sanding, so that the animal could not get the offline. After processing on the surface of the board or bar, it should be done with a hand, which will make it possible to evaluate how high-quality processing is.
Also boards should be treated with special means to protect against moisture and insects. Metal structural elements are processed by a solution that protects against the appearance of rust.
Finishing material is fixed with bolts, nails and screws. Walls should be durable so that they can withstand the weight of the dog, if it will come around.
Floor arrangement
It is best to build the floor in a street aviary from a tree. This is the most practical material in this case, since the risk of injury to the paw of the animal is minimal.
For the floor assembly, wooden bars of rectangular and square sections are suitable. Of these, increasing lags are made. On top of them can be laid out the usual lining. After completing the assembly, the floor is processed by oil and varnish. From above on the boards, you can put a fane. After the floor is going to the roof.
How to make the apartment
You can also make an aviary for small dogs in the apartment. In an apartment, it will have a much more compact size and a simplified design. The presence of such a structure will allow to limit the movement of the animal in it. It is very convenient for such a content for small puppies and lactating female.
Article on the topic: Cutting lambrequin to the fold: how to perform?
Also, such a device is used in the following situations:
- Pet teachment go to the toilet in the right place;
- Protection of property, children and other pets from Dental of PSA;
- fence of patients of animals;
- Puppy raising.
For a small puppy with a height in the withers from 40 cm, the facility area should be 0.5 square meters. m. For representatives of small breeds up to 80 cm - 2.5 square meters. m. Inside the enclosure, you need to put not only a sleeping dog with toys, but also her bowls with water and food, as well as a toilet.
Room aviary is assembled with his own hands as follows:
- A framework of rods or wooden bars is constructed. Best do the design of the quadrangular shape;
- Next, the frame is either covered with a mesh, either cooked by boards;
- At the corners, the finishing material is fixed with wire or screws. You can also use welding;
- On the one hand, the door is hung in the wall on removable loops.
The resulting structure is installed in the selected place. Fabric or diaper is placed on the floor inside such an enclosure, and the bowls with water and food are put. Also inside you need to arrange a sleeping place.
Knowing how to build an aviary for a dog, you can organize the most comfortable conditions for your pet.