The rocking chair is associated with comfort and comfort, and immediately want to stay in it in a fireplace in a country house with a cup of hot coffee. This is a very beautiful and original element of the interior, which fits almost any style. Also, swing on the chair is useful for health. So you can relax, relieve stress, gain strength, calmly read your favorite book, listen to music or just to build. The rocking chair can be made with your own trees, consider examples from photos, drawings and work in several technologies.
Features of wood structures
Most often, the furniture is made of wood, so the rocking chair did not exception. Why many choose this particular material:
- Wood is environmentally friendly and not harmful to health, the material does not allocate toxic volatile substances.
- The tree is a durable material suitable for creating massive structures.
- Durability.
- You can implement any idea and create design elements of the interior.
- The tree is easily and quickly processed, in it you can cut any ornaments and patterns, give any shape, painted and lacquer.
- Wide assortment and large selection of color solutions.
- The possibility of choosing various shapes and sizes, as well as making to order.
- Attractive appearance in the ethical side of the question.
- Resistance to high humidity and ultraviolet rays.
What is an attractive chair:
- This piece of furniture is able to calm the nerves and effectively remove stress due to light and rhythmic schism. Sometimes it is used to achieve complete relaxation and status of the trance.
- The parasympathetic nervous system is activated, and the body itself comes into a state of calm and comfort.
- You can distract from unpleasant thoughts, memories and everyday routine. At the same time, all muscles relax, the body is able to fully relax, gain strength and recover.
- A chair can help eliminate sleeping problems. All these manipulations in the form of light swinging are able to cause a deep sleep.
- Helps patients with tachycardia with the help of a tempo calming the heart muscle. There is also a vestibular apparatus training.
- In the chair you can immediately concentrate and bring order in your thoughts.
- It can be placed in the office, also at home or in the country area. You can also choose an armchair on the dimensions of a particular person.
How to make a chair a rocking chair with your own hands from the tree according to the drawings is shown on the video with the instructions and work running.
Varieties of chairs
There are many different patterns of chairs, they all may differ in their functionality, dimensions, style of performance, materials and availability of additional gadgets. We always choose furniture, sitting out of their preferences and habits, and a rocking chair did not exception.
Consider several options for rocking faces:
- The chair is mild and smoothly swam thanks to the radius. However, with such a design at the radius, the device must be made on a low landing. Otherwise, the chair may turn over, which will lead to unpleasant consequences. For the rocking chair is higher, the bumps are installed on the end. To get up, you need to strain a little and lean forward.
- If you have an armchair, having a clamor of curvature variable, then random tipping is excluded. Such products will suit lovers to relax with different buildings, they are comfortable, convenient and safe. Locking occurs softly and smoothly.
- Rocking boards with a cradle design specifically for mothers with young children. Here are only the seasons of the curvature variable, which makes the chair reliable and safe.
- Rocking-nirvana is a design on ellipseed classes. Swinging soft, almost blissful and soothing. However, it is not necessary to swing hard, tipping may occur. For this reason, it is necessary to supply a chair with bumps, sometimes the front is combined with the footboard.
- There is a type of nirvana's rocking chair on the springs, but it will be very difficult to make such a chair. You will need special wood breeds, and perhaps even rubberized design.
- Garden rocking chairs are protected from tipping up the ellipses.
Technology of work
To figure out how to make a chair Rocking with your own hands from the tree according to the drawings and the desired size, you need to purchase all the necessary materials and tools:- Screwdriver.
- Paint bruster for filling the fasteners.
- A hammer.
- Straight corner with a ruler.
- Disk machine for grinding.
- Saws.
- Electrolovka for cutting blanks.
- Clamp.
1 way
To create a rocking chair, you can use an ordinary chair, shortening his legs and attaching this design on the polls. In order for the appearance to be attractive, the chair can be shaken with leather or plastic ribbons. If you wish, you can also sew a rocker case.
To make the design of a more interesting form, the sidewalls can be cut from plywood according to a predetermined lecture. The edges of plywood should be well treated.
Then two obtained parts connect with each other using three bars (30 * 50 * 600 mm).
To lay out the top, we use thin boards and plywood slats (10 * 50 * 600 mm).
In some cases, the length can be increased so that the planks appear for the edges of the sidewall. After assembling the chair, it can be covered with varnish or paint.
2 way
We start the process of creating a rocking chair from the drawing. For a qualitative result, the sketch is obligatory. In addition, we will be able to save ourselves from strong errors in the calculation of the amount of material.
Technique of work:
- We take a metal mesh, where every cell cell is 1 centimeter to create a pattern for the sidewall. Then we carry this template on paper to make it easier to place the contour on the plywood. The main thing is to comply with the symmetry of both sidewalls.
- Getting down the cutting details. It is necessary to prepare the phaneer 3 centimeter thick. Cut from it 3 frames (120 * 800 mm). Side parts pipe with electric jigsaw on lecture.
- From the bar (50 * 25 mm) we cut 35 elements, each should have 120 centimeters. These are billets for the future back and seat.
- We proceed to the processing of all billets. Surfaces process the grinding machine, paying special attention to the ends.
- There should be no fibers, they are aligned with a hammer and then processed by a hot oil. Thus, the ends will become moisture resistant, and the chair itself will last longer. Olifa need to handle the surface twice.
- We proceed with the assembly of the rocking chair with their own hands from the tree in the photo and drawings. We fasten two sidewalls, applying pre-marks in the places of their connection. Fixation should occur from above at the location of the head, in the middle and in the legs with the help of the CARGs.
- To mount the tightening strips to the sidewall, it is necessary to use a special screed from screws - confirm. We make in the sidewall holes of 8 mm, and in the end - 5 mm.
- We proceed to the installation of seats. To attach it to the bottom, we will need 35 brutas with 4 holes in each of them (2 holes on both sides). I fix browns to the sidewall with self-draws. It is important to always check that the installation is made strictly horizontally. The assembly is completed.
- Establish the processing of the chair. The finish cladding of the product must be performed high quality and correctly. We heat the holes over and near the screws, then cover the armchair by an antiseptic, then we apply a varnish to create a moisture-repellent layer. Varnish is applied twice, after drying the first layer. Chair is ready!
3 way
We collect the chair the rocking chair according to the drawing, using high-quality wood varieties. As a basis, use a conventional wooden chair. All items will be mounted at right angles, so you do not need to additionally cut a lot of items.
- As the basis, we will serve as the size of the seat of the chair and the height of its legs. All connecting elements must be cut down strictly under the data dimensions.
- Start cutting parts. Side thickness should be from 1 to 1.5 centimeters. The height of the rear legs should be from 105 to 110 centimeters, and the front - from 55 to 60 centimeters. As transverse connecting parts for the design, we will use the rails 57 * 4 * 1.5 centimeters (length * altitude * thickness).
- We proceed to connect all the parts of the structure using the attachment method in the spike. To do this, we apply on all wooden parts markup, then cut the grooves in the legs (2 * 1.5 cm) having a depth of 2 centimeters. To connect the grooves and rails, their ends need to be treated with special glue.
- To make the final fastening of all the elements, set the gasket between the rocking chair and the clamp. Clamp must be tightened, after which leave the product for 24 hours.
- We proceed with the installation of the poloz. To perform it quickly and competently, we need a plywood sheet with a thickness of up to 1.5 centimeters. According to the leaf of the sheet, we cut the meter the same billets.
- On the legs of the rocking brackets cut holes in a width of 1.5 cm to suit the thickness to the clamses. In this case, the depth can be from 7 to 10 centimeters.
- We produce grinding of the edges of all polozov, then insert them into the slots. Where the landing of the polozov was produced, cut the hole through with a diameter of 2 centimeters. Then we put the construction glue on the hole, after which we set a spike of wood in it.
- Now we have to check the balance. So that the rocking is well balanced, you can install additional transverse planes in the bottom of the rear. Also remember to increase weight, you can always apply several decorative elements for weighting.
Now you can independently create a rocking chair yourself and please your household. The main thing is to remember that the product can scatter, and the material quickly move and lose your appearance. Therefore, always handle the chair with varnish so that it pleases you for a long time and created a comfort in the house.
Article on the topic: Photo Album Equipment with your own hands - scrapbooking