[Will be pure] How to wash the bath from plaque and rust?

The bathroom is a room in a house that must have a special purity. Even with regular care, the hosts are often faced with various kinds of pollution . About the types of these most pollution and their elimination options and will be discussed below.

What are the pollution?

Before you begin to eliminate the consequences, it is necessary to determine the type of contamination and the reason for its appearance.

One of the types of pollution is a soapfile, left soap, which is used for bathing bath.

The problem of a lime fly concerns all people living in terrain with hard water. It is its salt on the bath. A flare of this type is crumbling, has white or yellow. It is possible to get rid of the lime-based plaque with the help of acidic tools that destroy calcium compounds.

A common "disease" of the bath is both rust. It is formed due to water containing a large amount of iron. Rust has a kind of brown spots and is removed very difficult.

If the flare has a black or blue color and is in the corners of the tile, then you are dealing with mold or fungus. Pollution data can cause various kinds of disease and disposal from them. . A fungal or mold plaque needs not only in cleaning, but also subsequent disinfection to avoid infection with diseases.

How to remove simple contaminants?

Ordinary spots and raids are not removed too difficult, however, it is necessary on a regular basis. To remove a simple plaque, the detergent is suitable. It is necessary to work in the following order:

Water with water surface bath.
Apply a detergent on it using a sponge.
Wash off the remains of soap with water.

Article on the topic: What fertilizers to use on the backdrop?

Note! When choosing a detergent, it is necessary to look at its composition. The composition should not be aggressive components, which can damage the surface of the bath.

How to remove soap raid?

The reason for the appearance of a soap plaque on the surface of the bath is the left cleaner after washing. In order to avoid the appearance of such a plaque, it is necessary not to wait until the remedy is driving, and wash off the remnants of the soap immediately after washing the surface.

Important! It is recommended to use a liquid soap that do not contain talc remaining on the surface when combined with lime components.

It is possible to remove the soap flaw using lemon juice, which is necessary, squeezing the lemon and mixing with water in the ratio one to one, or dissolve citric acid in hot water.

The resulting liquid is necessary with the help of a sponge to the surface or use the sprayer. Next you need to wait a few minutes and wash it with warm water.

How to remove lime bloom?

Without the appropriate means from a lime flush, it is very difficult to get rid of. Special cleaning agent can be purchased in the store or prepare yourself . For cooking at home, you will need the following components:

Paul a glass of any cleaning agent
Paul glasses of soda
Quarter cup of vinegar

The resulting liquid must be applied to dirty places and leave within a few minutes, after rinse with water.

How to remove rust?

If you failed to prevent rust, it is necessary to at least get rid of the consequences. It is possible to wash rust by applying to the surface of purchased detergents that eliminate rust or people's fluids. At home, vinegar and citric acid will help to get rid of rust.

Interesting! Another way to remove rust is the use of homemade mustard without preservatives. You need to apply it to a problem place and leave for 8 hours.

Article on the topic: Useful décor for a bathroom that can be made with your own hands