Than to strip the house outside of a log or aerated concrete

1. Registration of brusade house
2. Facade of the structure from aerated concrete
3. Polyfoam and blockchaus
4. Choosing a color for a wooden house, its repair and backlight

During the finishing work for the house from a bar or aerated concrete, it is necessary to use only high-quality materials that can even change and decorate the structure of the structure. Let's look at what to sew a wooden house outside, for which the facade illumination is needed, its protection and how best to decorate the house outside.

We are wearing the house outside yourself

Registration of brusade house

Outdoor finish at home with wood

Before separating the house from the bar, you should remember that significant deformations are possible due to the construction shrinkage. Therefore, the decoration of the country house from a bar or a country cottage should occur somewhere 2-3 years after the end of construction. Very often, natural materials are used for facing houses from the bar, such as: wood, stone, metal or decorative plaster.

There is an opportunity to strip the house with a lining outside. The use of such material for structures from the bar is due to such advantages:

1. The lining is durable and reliable, the design with its help will serve you enough long time
2. Simple installation allows you to perform work with your own hands.
3. Use inside the house allows you to hide communications
4. Good heat and sound insulation indicators
5. Eco-friendly material is carried out not only the protection of the facade. With the help of lining, you can decorate any home
6. Repair of a damaged area not to make problems

In addition to natural elements, artificial materials can be applied. Their advantage is the simplicity of cladding with their own hands, low cost, the possibility to decorate the facade and give it any color. The durability of such a casing allows for a long time to forget about the finishing of the facade of the house from the bar. In particular, for this use:

• Siding panels
• Fibro cement plates
• Thermophali.

Siding panels are the most common and sought-after option cheap to separate their accommodation. Processing of such a material is not required, the care for it is very simple, and the installation and repair will be able to align even the beginner. However, having sufficient weight, the panels should be installed only on a reliable foundation and frame of the house from the bar. Fibro-cement plates are also a good design option. The ability to pick up any flower makes plates more in demand.

What to see the house outside?

Article on the topic: Combining wallpaper in the interior: in the living room (hall), in the kitchen, hallway

Brick can well be used for the facade of the house from the bar, however, during the work, you can not forget about the shrinkage. In addition, the brick has a lot of weight for which the foundation should have a special strength. Brick has such advantages:

1. Fireproof Safety
2. Easy to use
3. Aesthetic view - the design of the facade will look much more attractive than gray plaster
4. Brick allows you to achieve good sound and thermal insulation

In order to use a brick for a wooden house, remember the need for ventilation gaps - you can install ventilation grilles at a distance of 2-3 m from each other. In order to connect the brick and a wooden wall you need to apply metal elements. One side is attached to the wooden wall, and the other is cemented. Brick allows you to give the facade aesthetic look and decorate the old building. However, due to its value, the brick is not so often applied.

Facade of the structure from aerated concrete

Finish home outside

Not only owners of wooden buildings are interested in to strip the house outside. What is better to use for a house of aerated concrete? Most often, plastering is placed on walls from aerated concrete, but you can use brick and tiles for them.

Important! The protection of the facade outside the house of the housekeeping should occur after the finishing of the finishing works inside. This is due to the possibility of the unimpeded output of the formed vapors through the walls.

It should be remembered that the usual plaster is not used here, as the walls of aerated concrete instantly absorb moisture. It is for aerated concrete that special mixtures are manufactured that impede moisture absorption. After the shuttering processes are completed, you can decorate the facade and give it the necessary color with paint. The processing of aerated concrete also occurs with the help of special hydrophobizers. Cerambist plates are able to significantly speed up and simplify the process of cladding with their own hands. The plates have large sizes, and their installation occurs not only with the help of glue solutions, but also on the crate.

Also recently, the decoration of the walls of metal-produce was very popular. And if earlier it was used more for industrial buildings or storage facilities, now metal profile can be decorated with a facade of even a country house. The color of the material is so diverse that it is possible to use the most extraordinary colors for the facade. In addition, metal products can be fixed both vertically and horizontally. Vertical trim panels are not inferior to horizontal position.

Article on the topic: Promstable floor - what is it and where applies

Polyfoam and blockchaus

We are wearing the house Blokhasom

Very often, when choosing a facing, a privilege is given to the design of Blokhaus. In order to make the design of the country house by block chalk with their own hands, you need:

• The first thing is the calculations of the required amount of material. Only with the right count, you will get quickly to make a facade panels
• Panels should chase a few days after purchase for "acclimatization", install immediately after the acquisition is not recommended.
• Clean the surface of the wooden wall for subsequent cladding. In addition, we need a treatment with an antibacterial mixture. Also need processing by primer
• The lamp is manufactured using a level, you need to stick with a step in 50 cm
• Blockchasomdostusko just separating the surface. Fastening occurs by the Schip-Paz and Samores System
• If the lifting of the walls of the house occurs with a vinyl blockhouse, then a small clearance is left to compensate for expansion

Blockball panels are universal: color and texture allows you to implement any design even inside the house. The protection of the panels of Blockhaus speaks about the possibility of carrying out the horses, because when scratching, the surface is enough and painted. The panels have a single drawback that many turn into dignity: the material is required to periodically paint. At the same time, it becomes possible to change the color of the walls of the country house.

Warming at home, as well as its covering can occur in the penplex. The main thing is to remember that this material requires subsequent shockting. The penplex finish is the high-quality protection of the country house, which will cost you much cheaper than the covering of siding panels or with fiber cement plates. Before starting insulation, the penplex should be ensured in the evenness of the walls and if they have significant differences, then the surface will have to be aligned. The wall decoration occurs with a dense penplex, the thickness of which should be at least 5 cm, the plates are fastened with glue and dowels. It is important to pre-prim surface and place foam in a checker order. After the penplex finishes, it is completed, it is necessary to start shuttering the surface. If you have not yet decided than shelter the house outside, then think about all the usual option: insulation of the penplex and shocking. By the way, if you add a pigment into a plaster solution, then the facade can be given another color. It seems to me cheaper way to separate the walls of the house simply not.

Choosing a color for a wooden house, its repair and backlight

We wash the house tree

Of course, with time, the country's wooden house loses its primordial look, and we strip the repair of the facade. But what is happening, and what wall processing should be made to save protective properties for wood?

Article on the topic: Features of a wedge valve

If you do not know what to choose a color for the future facade, then you should consider the overall design and color of the roof. Usually in northern latitudes use warmer shades, and cold motives are used in the southern, popularity. However, the design of your facade is purely your right and therefore you can separate it, even a blue, even lilac paint. Very often, homeowners use similar colors for both design inside the house and the design of the walls outside the housing. Before proceeding with staining, the surface should be prepared. In some cases, for the facade, only the processing of special verses and impregnations may be required. By the way, the treatment of varnish will allow the wood to give the wood and thereby protect it from external negative impacts.

Repair should include only high-quality materials, and sometimes even those elements with which the country house was built. If we talk about wood, then everything is clear, but also clay and even manure were often used for buildings. Repair of the country area may well occur without attracting people from the side, because the painting of the facade, the insulation of the walls and their processing of various impregnations, the repair of the fence can be performed independently. It is also important is the design of the indoor room, it must coincide with the overall style of the building. And if you built a wooden house in the country, it makes no sense to use in it design style High Tech.

Very often, the backlight is used for the walls of the house. She emphasizes some architectural elements or solutions. The backlight is also used around the perimeter of the house for convenience of aisle in the dark. Illumination can be performed for various purposes. For example:

• Hidden backlight allows you to highlight some facade elements, with its help the house is filled with soft glow
• Local illumination is used for commercial purposes. It is using inscriptions or signs
• Colorodinyk allows you to play with shades and brightness creating light shadows

Using the illumination of the facade in his home, you can spectacle to present it for guests and ordinary passers-by, forcing them at the same time stop your eyes on your housing.