Once beautiful renovation in the bathroom can be spoiled because of the fungus on the junctions of tiles and bath. Unfortunately, the constant availability of moisture in this room only contributes to the formation of mold and fungus. Eliminate this problem is quite difficult, but maybe. Below it is worth considering how to remove the contamination between tiles in the tub with folk methods.
Than to clean the grout between the bathroom and tile
Dark spots between ceramic tiles are formed due to the appearance of fungus. Despite the practicality of the material, it is almost impossible to avoid contamination of the seams. In order to clear all pollution in the seams, there are several proven and effective means.
It is worth listed by:
- soda;
- acetic acid;
- "White";
- sandpaper;
- Purchase detergents for cleaning plumbing;
- Water-emulsion paint;
- hydrogen peroxide;
- Other funds.
It should be noted that The choice of a cleaning method as a whole depends on how much the fungus spread. If several black or gray points were noticed in the seams, then less aggressive cleaning agents can be applied. In the case of a strong lesion, when the fungus has already deeply entered the grout, you can take more radical measures.
Soda - the main means for combating fungus
Soda is a good antiseptic. Food soda adversely affects the fungus, at the early stage of its development, that is, as soon as he appeared. It is also recommended to use soda for regular cleaning of space between tiles.
The order of cleaning soda is:
- You need to take 1 or 2 packs of food soda.
- Before processing, the grout is preferably moistened with water.
- For processing, use a brush or sponge.
- Soda powder should be carefully handled or plenty of all seams.
- A slightly damp soda need to clean all the seams with a brush.
- Next, everyone leaves for 10-15 minutes, after which they wash off with water.
Article on the topic: Difference of the boiler from the water heater
Important! If, after processing soda, the stains remained, this means that the fungus has already flipped in a porous grout structure. In this case, you need to use other means for cleaning.
How to extort the places of grouting by vinegar
This can be done with vinegar. He kills the fungus and mold.
Cleaning method:
- Water and vinegar (9%) need to be mixed in equal proportions.
- Next, with the help of a rigid brush, all seams should be mixed with a solution. Also, the composition initially can be sprayed with a pulverizer.
- After waiting 5 minutes, it is necessary to clean the brushed polluted places and wash off the pollution with water.
Vinegar is also part of another means to remove fungus and mold on intercutric seams:
- To work, you will need: a comfortable capacity, 1.5 liters of warm water, 150 grams of food soda, 0.5 cup of cutlery (7-9%), 25 grams of citric acid, sponge or small brush, gloves.
- The first thing in water dissolves the soda, then it should be gently pour into the liquid lemon and acetic acid. When mixing acid with soda gives a reaction, so it should be prepared to prepare a solution.
- The cooked solution with the help of the brush must be wiped all the seams and leave for 15 minutes.
- After 15 minutes, the processing should be repeated and left at the same time. Next, everything must be washed with warm water.
This method is very well coped with even deep pollution, However, it is not recommended that such a cleaning is not recommended, since the acids can destroy the grout structure.
Important! The residues of the solution in a concentrated form cannot be flushed off into the draining of common sewage, it is desirable to dilute the mixture with water in proportions 1: 3. Concentrated solution can damage thin rubber gaskets of communications.
"White" to purify interputric space
It is worth noting that "whiteness" is suitable only for grouting white. If you use it for color grout, it is possible that the color pigment will be removed, and then divorces are formed."White" contains chlorine, it kills fungus and various harmful bacteria. Cleaning method with this means:
- With the help of a painting brush or brush "Whiteness" are applied to the places of grouts and leave for 5-10 minutes.
- Everything needs to be washed with clean water. To remove the smell of chlorine and all the remnants of contaminants may have to wash the surface with water several times.
Article on the topic: How to cut the castle in the door with your own hands?
Washer cleaning detergent
There are a large selection of cleaning products for baths, toilet bowls and other ceramic surfaces. The composition of such funds, as a rule, includes oxalic acid, it eliminates all types of bacteria, as well as fungus and mold.
Processing method:
- Previously, you need to moisten the space between the ceramic tiles with water with a sponge.
- The detergent should be wiped all the seams, for this, a painting brush or toothbrush is suitable.
- Keeping tool need no more than 5-7 minutes.
- Next, everything needs to be thoroughly washed with clean water, it is desirable to remove all the remnants of the cleaning agent from the surface of the tile.
Important! When working with means that contain acids, alkalis, chlorine, it is necessary to wear rubber gloves, if possible, also mask and glasses.
In which cases it is better to use emery paper
If the fungus fails to completely remove during cleaning, but only a few specks remain, you can use the sandpaper. This is a way to apply if you see that the fungus has not yet had time to penetrate the grout, and formed only on the surface layer. Entry paper takes with a small abrasive and gently erase the upper layer of the grout, where he remained flexible.
What to clean the seams between tiles and bathroom: hydrogen peroxide
A good antiseptic means is also hydrogen peroxide. The solution of peroxide should not be flushed off, thanks to this, the fungus will not be able to spread further. Disabled stains in this way are not removed, but the recently formed fungus will immediately die.
For processing you need to prepare a solution - the peroxide and water in the proportion of one to two are mixed. You need to handle all the seams and give time to dry, wash nothing.
Water-emulsion paint
If the contamination is completely removed, it is possible to use waterproof waterproof paint. It is necessary to select her color on one or two tones darker than the grout itself. Before coloring, it is possible to moisten the seams with antifungal agent (sold in any construction store). Paint should be applied in 2-3 layers.
Article on the topic: Silver paint without silver with unique properties
Deep purification
When none of the above funds leads to the desired result, the stains were deeply entered, and the grout itself begins to crumble, only one method remains: cleaning the seams and replacing the grout.
To remove the grout there is a lot of fixtures: grinding machine, Bulgarian, etc. In the end, you can also choose the grout to the screwdriver or erase the sandpaper. After removing the old grout, it is necessary to rinse all the seams well, as well as to be treated with antifungal agent. A new layer of grout can be applied to dried places between the cafeter.
Tips how to avoid the appearance of mold
In order to prevent the appearance of fungus and mold on interputric seams, you can use several tips:
- Tip number 1. After cleaning the seams, they need to be treated with a special tool that seals the micropores, it will prevent the fungus in the small cracks of the grouts. Special fluid (liquid waterproofing) can be purchased at any store.
- Tip number 2. To prevent the formation of fungus, you need 1-2 times a month to clean the seams between the soda's cafeter.
- Tip number 3. It should be not allowed to ensure that the moisture is going between the seams, it applies to the joint between the bathroom and the cafeter. The bathroom needs to be regularly ventilated, and the area of the kermile joints is wiped with a dry towel.
- Tip №4. If you notice a few fifth fungus, you can handle the seams with a special pencil, it is sold in household chemicals. The composition of the pencil kills mold and fungus.
- Tip number 5. The bathroom should be washed weekly. To remove the microbes and the argument, the fungus will be enough wet cleaning with the addition of a tablespoon of ammonia alcohol or vinegar.
Get rid of mold and fungus in the seams between the tiles is easy if the stains just started to form on the walls of the bathroom. In order to exclude the settlement of fungus, it is necessary to make simple cleaning on a regular basis.
What to clean the seams between the tile in the bathroom, is shown in this video: