Fences are a mandatory element of the naughty, country or garden plot. Unfortunately, their appearance pleases not always. The owners begin to reflect on and how to decorate the fence. A quick and reliable way to decorate any fence is a polymer grid with an image applied to it. Most often it is some kind of photo. Because of this, the material is called a photography for fences, and the fence - the photo by the photo. The idea has recently arose, but is becoming increasingly popular: quickly and cheap to reorganize an unsightly fence or wall - who will not like it ...
An example of installing photosette on the fence from the chain grid
What is a photography on the fence
The technology is known for a long time - it is used in the manufacture of banner advertising or for printing photo walls. But use such materials to decorate fences recently. Photographing is applied or on banner fabric, or on a reinforced grid of PVC. What is better to say hard: you can choose about each situation.
In the case of mesh fences, it is better to use a photo mesh, not fabric. It is "holey" - the size of the cell is 1 mm. Because of what the light is missing and wind. For this reason, if it creates an additional sail, then insignificant. Its normally suffer even the pillars installed simply in the holes with rubble, without concreting.
This looks like a photography for the fence
The second plus photosetters for the fence - she misses the light. And if your fence is on bother with a neighbor, he will not have the reasons to complain that your fence shads his landing: Light misses sufficient. At the same time, a very small cell significantly reduces the viewing of your site: just a mesh without a picture is visible by 35%, and almost nothing can be visible with the drawing. Even silhouettes differ with difficulty.
Article on the topic: Convenient storage of packages in the kitchen
Photo sets from banner fabric are good if you decide to reorganize the opposite side of the fence from the professional flooring. Sad gray or brilliant surface not only does not glare. She also harms nearby landings: the metal is heated in the sun and burns everything that is planted nearby. In this case, skip the sunlight to anything. Banner fabric tensioned on such a fence Most of the solar heat will reflect or take over. As a result, the metal will warm up less and plants near the fence will grow well.
You can place a photo mesh and the back side of the fence from the professional flooring
Temperature range of uxolis - from -40 ° C to + 70 ° C. The declared period of operation is a permanent, warranty period - from 5 years. Approximate price - 500 rubles / sq.m; 800 rubles for the running room with a width of 160 cm. Most firms offer the gallery of images that they can transfer to the grid, some can print any image.
Rolled photostitus rolls up with a solid cloth
Forms of release are two: in a roll of a certain height (usually 160 and 180 cm) or canvas - fragments 160 * 250 cm or 160 * 300 cm.
How to mount
Recommended by manufacturers Mounting method - Paste into the body of the grid. Reverses are metal rings. Through these rings, the photostress for the fence is attached to the columns. Fasteners are plastic clamps, wire, cable, twine or something like that, if we attach to the columns or metal guides.
Such rings are installed in the stack.
The lover rings are included in the kit, but you are installed independently: often it is necessary to cut the rod to the size of the run. Therefore, it is necessary to install them in fact: after it was tried and cut off the necessary piece.
For such installation uses records
You can buy rings and blocks and separately - they are a penny, there are in stores selling furniture accessories, and can be found on construction or auto markets, as they put them in the awnings for machines for shading grids. How to install a chamoque with the help of fools, look in the video.
Article on the topic: At what distance hinge on the interior door
The photostress for the fence can be attached to the wood. For this, it is not necessary to put the champs, you can navigate directly: use brackets and construction stapler (take only some stainless steel and stainless steel with a stainless steel, otherwise rusty sweels will go). The second option is nails with pressshabs and preferably plastic (transparent) or from galvanized metal.
Photography on the fence from the professional sheet with brick columns
Before starting installation with photosette, remove the protective film, which is pasted on the back side and you can hang. The removed film, by the way, can be used as an ordinary polyethylene: it is good quality and quite high density.
Photoshot for the fence - some options in the photo
Image choose to your taste
From the side looks like a wooden, seized by ivy. It will be interesting to watch in winter))
Stone wall and roses
The photography for the fence closes the transparent fence, making it almost opaque
You can decorate wooden panels or professional owl
From the inside to decorate too
Figure can be ordered: at least horses, even watching dogs)))
Exactly better than the lattice
Even such a scene can be printed