How to make easel do it yourself
After studying the design on the Internet, discussed the drawing and took up work.
I went to the shop a trowel and bought four boards 40x20x2000 to 26 rubles (0.9 $). Alas, they were all not without defects. Latest bought.
Measured the boards, did all the labels and cut.
The dock did simply - drilled holes and connected the rails with long screws, pre-sampleing the PVA glue. Since the rake saws with a regular saw, the slice turned out not even. This is not a circular.
In order for the design to be stronger, and to align the shortcomings of the spike, strengthened it with corners of plywood. Vika suggested the idea. These corners strengthen the subframe for the canvas.
And now the know-how of my easel! It was necessary to come up with the design of the stand for a subframe or tablet, which are put on the easel. And so that this stand can be moved vertically down or up. Riding a tool yesterday, I discovered wide thread screws inside. These screws are used to dock the chipboard panels in the manufacture of furniture. Very comfortable thing!
So, I drilled holes in the side rails in those places where the stand should be, and screwed these screws there. It is enough to screw the bolt, so the stand is.
The back leg fastened on the hinge to the upper rail. That's ready to Molbert. It remains to make an inclination lock.
I do not like to complicate. Everything should be as simple as possible. Fixator I made from the rail, making cuts in several places. With these saws, the retainer to go to the screw, screwed into the back of the easel.
Molbert ready! It has 3 inclination degrees and 4 level of tablet height. Add more positions can be very simple.
Further I have to make a gift for my mother. She has been dreaming of hanger on wheels for many years ...
Article on the topic: Technology and video: How to glue liquid wallpaper on the wall